I am wondering if the RESC1608L pad length is correct. The difference between the RESC1608L and CAPC1608L is apx 30%. The difference between RESC2012L and CAPC2012L is about 10%. I have not looked at heights or calculated the values using the IPC-7351 equations. The RESC1608L pads look very narrow (even for least material).
define(`PKG_CAPC1608L', `PKG_SMT_2PAD_MM100( `$1', `$2', `$3', 90, 65, 120, 200, 120, 0, 0)'); define(`PKG_RESC1608L', `PKG_SMT_2PAD_MM100( `$1', `$2', `$3', 90, 50, 120, 200, 120, 0, 90)'); define(`PKG_CAPC2012L', `PKG_SMT_2PAD_MM100( `$1', `$2', `$3', 140, 110, 160, 280, 170, 0, 0)'); define(`PKG_RESC2012L', `PKG_SMT_2PAD_MM100( `$1', `$2', `$3', 130, 100, 160, 280, 160, 20, 130)'); Also I noticed that in geda.inc (200811xx) PKG_RESC3216M appears twice. The first occurrence should be PKG_INDC3216M. (* jcl *) -- You can't create open hardware with closed EDA tools. http://www.luciani.org _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
