Hi Alex, please download the newest spnet on my site and let me know how it goes, it should be a bit more compatible.
Here is whats new: * Comments in both .spnetlibs and .spentrc (# is the comment character) * Won't bail out on empty lines in either file above * NMOS_TRANSISTOR and PMOS_TRANSISTOR as 4 terminal mosfets * It doesnt matter if a component has brackets or not like in your original example. If there is no brackets (therefore no attributes) the component is ignored. * All power symbols that come with gschem now work properly Eager to here how this new version works and how compatible it is. In the next release (perhaps tomorrow) I will add the support to pull librarys already defined in gedarc files. Will also try to add autonet naming for unnamed nets. -Anthony On Tue, Jun 23, 2009 at 2:46 PM, Anthony Shanks<[email protected]> wrote: > Are titleblocks "legal" (without lack of a better term) without > brackets or were they just that way in your schematic for some reason? > I thought all components had brackets but maybe only components with > attributes have brackets? > > I took a look at v2i_2v.sym, it doesn't look like it has any schematic > file attached to it. Also spnet requires subckts with lower level > schematics to have the attribute to device=SUBCKT. There is no > standard attribute in the gEDA flow to define a subckt so thats what I > choose for spnet. Take a look at my latch example on my website for > what the properties of subckts look like. > > Net stitch failure happens usually when there is a net without a > netname attached to one of the nets its connected too. There is no > autonet name feature yet but I plan to add it. > > Also which devices in your schematic don't have refdes? > > -Anthony > > On Tue, Jun 23, 2009 at 1:59 PM, A.Burinskiy<[email protected]> wrote: >> Hi Anthony, >> >> The reason for the message >> >> -E- Fatal Error: Invalid Component attr "C 42200 44200 1 0 0 gnd-1.sym" >> >> Was that first component, that is title-B block listed in the >> test_v2i_2.sch without pair of { } ! >> >> Symbol spice-lib.sym is a special symbol. I did it. I think netlister >> should support custom symbols. >> v 20090328 2 >> B 0 400 1900 300 3 0 0 0 -1 -1 0 -1 -1 -1 -1 -1 >> T 100 300 9 10 0 1 0 0 1 >> device=library >> T 100 500 9 10 1 1 0 0 1 >> refdes=A? >> T 600 500 9 10 1 0 0 0 1 >> SPICE LIBR >> T 500 200 8 10 1 1 0 0 1 >> file=? >> T 100 200 9 10 1 0 0 0 1 >> File: >> T 0 -5 8 10 1 0 0 0 1 >> corner=TYP >> >> And v2i_2v.sym is real subcircuit. >> >> After artificially adding this braces I've got (please note, that >> (42300;44500) corresponds to connection point of gnd symbol pin) >> >> $ spnet test_v2i.sch >> >> spNet v0.9.1.2 >> gEDA/gschem Netlister >> Copyright 2009 Anthony Shanks >> >> -I- Starting Build of Cell: test_v2i >> -I- Adding Library: "sym" >> -I- Adding Library: "power" >> -I- Combining Cells >> -W- Device in cell test_v2i does not have a refdes, ignoring. >> -W- Device in cell test_v2i does not have a refdes, ignoring. >> -E- Net stitch failure in cell test_v2i near point 42300,44500. >> >> Thanks, >> Alex. >> >> >> >> On 06/23/2009 10:54 AM, Anthony Shanks wrote: >>> Hmm, a few things. >>> >>> Is that ground symbol the default that comes with gschem (device=none, >>> netname=0)? Can't look right now, at work. >>> >>> I also noticed a few things in your schematic that is definitely not >>> supported (right now): >>> >>> C 47000 49500 1 0 0 spice-lib.sym >>> C 50000 44900 1 0 0 v2i_2v.sym >>> >>> What are these? I assume the spice-lib.sym is a subckt netlist but I >>> don't know what the other is. >>> >>> A quick fix in your case with the ground symbol is just to add the >>> attribute device=globalnode and net=0. >>> >>> -Anthony >>> >>> On Tue, Jun 23, 2009 at 10:00 AM, A.Burinskiy<[email protected]> wrote: >>> >>>> Hi Anthony, >>>> >>>> Yes, there is device that is not in the list and this is ground symbol. >>>> Please find diff file and test_v2i.sch attached. That is what I have >>>> (Please >>>> note, that your search for '=' sign, while there is no any '=' sign in the >>>> string...) >>>> >>>> $ spnet test_v2i.sch >>>> >>>> spNet v0.9.1.2 >>>> gEDA/gschem Netlister >>>> Copyright 2009 Anthony Shanks >>>> >>>> -I- Starting Build of Cell: test_v2i >>>> -I- Adding Library: "sym" >>>> -I- Adding Library: "power" >>>> -I- Combining Cells >>>> >>>> -E- Fatal Error: Invalid Component attr "C 42200 44200 1 0 0 gnd-1.sym". >>>> >>>> $ more ~/.spnetlibs >>>> library: /home/username/tsmc "sym" >>>> library: /usr/local/share/gEDA/sym "power" >>>> >>>> >>>> >>>> On 06/23/2009 09:39 AM, Anthony Shanks wrote: >>>> >>>>> Comments are not supported yet, it's on the todo list. >>>>> >>>>> >>>>> >>>>> Is the new code working yet? the invalid compoent error will come up >>>>> with there is a symbol in your schematic without a valid device >>>>> attribute. Here is a list of devices that are current supported >>>>> (device=) >>>>> >>>>> >>>>> >>>>> RESISTOR >>>>> >>>>> CAPACITOR >>>>> >>>>> INDUCTOR >>>>> >>>>> NPN_TRANSISTOR >>>>> >>>>> PNP_TRANSISTOR >>>>> NMOS3T >>>>> >>>>> NMOS4T >>>>> >>>>> PMOS3T >>>>> >>>>> PMOS3T >>>>> >>>>> SUBCKT >>>>> VOLTAGE_SOURCE >>>>> CURRENT_SOURCE >>>>> >>>>> PIN >>>>> >>>>> >>>>> >>>>> As stated I will add suport for [N|P]MOS_TRANSISTOR in the next >>>>> release as a 4 terminal mosfet device. Besides this, do you have any >>>>> components in your schematic that is not on the above list? >>>>> >>>>> >>>>> >>>>> BTW, thanks for all your help in debugging. >>>>> >>>>> >>>>> >>>>> -Anthony >>>>> >>>>> On Tue, Jun 23, 2009 at 3:12 AM, A.Burinskiy<[1][email protected]> >>>>> wrote: >>>>> >>>>> Hi Anthony, >>>>> Yes, the cause of segfault are empty strings at the end of file. Do >>>>> you >>>>> support comment out in .spnetlibs? I will go ahead and try your new >>>>> code. >>>>> Thanks, >>>>> Alex >>>>> >>>>> On 06/23/2009 03:03 AM, Anthony Shanks wrote: >>>>> > Wow. I guess I have a lot to learn as far as releasing code and >>>>> > compiling versions go because it works fine on my end with gcc >>>>> 4.3. >>>>> > Sorry this is the first time I've released code (this big), >>>>> please >>>>> > bare with me. >>>>> > >>>>> > I tried one lib in spnetlibs with your line exactly and it works >>>>> fine >>>>> > without a segfault. Can you attach your spnetlibs to ensure I'm >>>>> 100% >>>>> > using exactly? One thing I did notice though is that if the file >>>>> > exists but is empty it does segfault. I just fixed this error and >>>>> > reuploaded it but I think it may go back to giving you the >>>>> invalid >>>>> lib >>>>> > error (you can redownload it from the same link). Are you sure >>>>> there >>>>> > are not blank lines or anything in your file? >>>>> > >>>>> > Also about number 1 and number 2 thoughts. That plan was already >>>>> in >>>>> > the works for the official release. Most of the symbols from >>>>> gschem >>>>> > work with spnet except the mosfets since geda does not have a 3 >>>>> > terminal symbol. I plan on making [N,P]MOS_TRANSISTOR work for 4 >>>>> > terminal devices. Also I plan for spnet to read the libraries >>>>> already >>>>> > defined in the gEDA rc files. This will also be done in the next >>>>> > release. I'll try to get a version that does this by the end of >>>>> the >>>>> > week however. >>>>> > >>>>> > Let me know how it goes after you try the newest update. >>>>> > >>>>> > -Anthony >>>>> > >>>>> > >>>>> >>>>> _______________________________________________ >>>>> geda-user mailing list >>>>> [2][email protected] >>>>> [3]http://www.seul.org/cgi-bin/mailman/listinfo/geda-user >>>>> >>>>> References >>>>> >>>>> 1. mailto:[email protected] >>>>> 2. mailto:[email protected] >>>>> 3. http://www.seul.org/cgi-bin/mailman/listinfo/geda-user >>>>> >>>>> >>>>> ------------------------------------------------------------------------ >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> geda-user mailing list >>>>> [email protected] >>>>> http://www.seul.org/cgi-bin/mailman/listinfo/geda-user >>>>> >>>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> geda-user mailing list >>>> [email protected] >>>> http://www.seul.org/cgi-bin/mailman/listinfo/geda-user >>>> >>>> >>>> >>> >>> >>> _______________________________________________ >>> geda-user mailing list >>> [email protected] >>> http://www.seul.org/cgi-bin/mailman/listinfo/geda-user >>> >>> >> >> >> >> _______________________________________________ >> geda-user mailing list >> [email protected] >> http://www.seul.org/cgi-bin/mailman/listinfo/geda-user >> > _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
