Hi: I've been using the Debian gEDA suite for some time and have been working on a 1KW Power Supply. I have had no end of frustration with the gafrc file setup. The latest is that gschem refuses to find two of my symbols. A big red triange shows on the schematic. I've really run out of ideas. My setup is as follows:
Debian Lenny system with linux 2.6.26-2-686 File setup - /home/gary/gaf/PFC_1kwRegulator/<project .sch files> /home/gary/gaf/PFC_1kwRegulator/project /home/gary/gaf/gafrc /home/gary/gaf/gschem-sym (my personal symbol library ) /home/gary/gaf/gschem-sym/IR1150-1.sym (one of the missing symbols) My project file is: #List all the schematics to be netlisted #and laid out on the pc board. schematics /home/gary/gaf/PFC_1KwRegulator/PFC_1KwRegulatorP2.sch # #For an output-naem of foo, gsch2pcb generates files #foo.net, foo.pcb and foo.new.pcb. If there is no #output-name specified, the file names are derived from #the first listed schematic, i.e. forst.net, etc. # #Path to elements directories elements-dir /home/gary/gaf/pcb-elements/Epcos elements-dir /home/gary/gaf/pcb-elements/Fairchild elements-dir /home/gary/gaf/pcb-elements/General elements-dir /home/gary/gaf/pcb-elements/IR elements-dir /home/gary/gaf/pcb-elements/Magnetics elements-dir /home/gary/gaf/pcb-elements/MCC elements-dir /home/gary/gaf/pcb-elements/Ohmite elements-dir /home/gary/gaf/pcb-elements/Panasonic elements-dir /home/gary/gaf/pcb-elements/Vishay My gafrc file is: (component-library "/home/gary/gaf/gschem-sym/Diode-syms") (component-library "/home/gary/gaf/gschem-sym/General-syms") (component-library "/home/gary/gaf/gschem-sym/IC-syms") (component-library "/home/gary/gaf/gschem-sym/Inductor-syms") (component-library "/home/gary/gaf/gschem-sym/Switch-syms") (component-library "/home/gary/gaf/gschem-sym/Transistor-syms") My gschem-sym/IC-syms/IR1150-1.sym file is: v 20080127 1 B 300 0 1800 1700 3 0 0 0 -1 -1 0 -1 -1 -1 -1 -1 T 1000 700 5 10 1 1 0 0 1 refdes=U? T 900 1100 5 10 1 1 0 0 1 device=IR1150 T 1200 1500 5 10 0 1 0 0 1 numslots=0 T 300 2100 5 10 0 1 0 0 1 description=Power Factor Controller/Boost Regulator T 300 2300 5 10 0 1 0 0 1 author=Gary L. Roach :[email protected] T 200 300 5 10 0 0 0 0 1 footprint=SIOC8R P 0 1400 300 1400 3 0 0 { T 400 1500 5 10 0 1 0 0 1 pintype=pwr T 300 1300 5 10 0 0 0 0 1 pinseq=1 T 0 1400 5 6 1 1 0 0 1 pinnumber=1 T 400 1400 5 6 1 1 0 0 1 pinlabel=COM } P 0 1000 300 1000 3 0 0 { T 400 1100 5 10 0 1 0 0 1 pintype=clk T 300 900 5 10 0 0 0 0 1 pinseq=2 T 0 1000 5 6 1 1 0 0 1 pinnumber=2 T 400 1000 5 6 1 1 0 0 1 pinlabel=FREQ } P 0 600 300 600 3 0 0 { T 400 700 5 10 0 1 0 0 1 pintype=in T 300 500 5 10 0 0 0 0 1 pinseq=3 T 0 600 5 6 1 1 0 0 1 pinnumber=3 T 400 600 5 6 1 1 0 0 1 pinlabel=Isns } P 0 200 300 200 3 0 0 { T 400 300 5 10 0 1 0 0 1 pintype=in T 300 100 5 10 0 0 0 0 1 pinseq=4 T 400 200 5 6 1 1 0 0 1 pinlabel=OVP/EN T 0 200 5 6 1 1 0 0 1 pinnumber=4 } P 2400 200 2100 200 3 0 0 { T 1700 300 5 10 0 1 0 0 1 pintype=pas T 1300 100 5 10 0 0 0 0 1 pinseq=5 T 2400 200 5 6 1 1 0 0 1 pinnumber=5 T 1700 200 5 6 1 1 0 0 1 pinlabel=COMP } P 2400 600 2100 600 3 0 0 { T 1700 700 5 10 0 1 0 0 1 pintype=in T 1300 500 5 10 0 0 0 0 1 pinseq=6 T 2400 600 5 6 1 1 0 0 1 pinnumber=6 T 1700 600 5 6 1 1 0 0 1 pinlabel=Vfb } P 2400 1000 2100 1000 3 0 0 { T 1700 1100 5 10 0 1 0 0 1 pintype=pwr T 1300 900 5 10 0 0 0 0 1 pinseq=7 T 2400 1000 5 6 1 1 0 0 1 pinnumber=7 T 1700 1000 5 6 1 1 0 0 1 pinlabel=Vcc } P 2400 1400 2100 1400 3 0 0 { T 1700 1500 5 10 0 1 0 0 1 pintype=out T 1300 1300 5 10 0 0 0 0 1 pinseq=8 T 2400 1400 5 6 1 1 0 0 1 pinnumber=8 T 1700 1400 5 6 1 1 0 0 1 pinlabel=GATE } Thanks in advance and appologies inf this has been covered before. Gary Roach _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
