Maybe its doing strncmp such that +275VDC matches +275V, can you
upload your project file or an example file showing the error?
--- On Wed, 8/5/09, Gary L. Roach <[email protected]> wrote:
From: Gary L. Roach <[email protected]>
Subject: gEDA-user: Netlist error
To: [email protected]
Date: Wednesday, August 5, 2009, 2:58 PM
When I run gsch2pcb, the netlist that is generated always ties my
+275VDC output to the +275V Return. This shorts all the components
tied
to the high side to the components tied to ground. I am using the
generic Input/Output symbol output-1.sym for both connections. A drc2
check on the schematic says that my input pins aren't marked for
pintype
(not true) but nothing else. I'm using Debian Lenny distribution.
I'm not sure what information is needed to make sense of this. So
please
ask.
Gary Roach
_______________________________________________
geda-user mailing list
[1][email protected]
[2]http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
References
1. file://localhost/mc/[email protected]
2. http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
_______________________________________________
geda-user mailing list
[email protected]
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
