Thanks for the help, that is indeed the problem. It appears whenever I autoroute the board AND it puts a via next to the edge of the board it's creating all those unnecessary traces. If I can keep it from putting traces on the edge of the board then I should be fine.
Thanks again for you help. > Date: Fri, 14 Aug 2009 12:53:00 -0400 > From: [email protected] > To: [email protected] > Subject: Re: gEDA-user: PCB Lockup/Optimization > > > Ok, I think I know what's happening, but I don't know how you got to > that point. > > There's a via at 47.43mm, 18.54mm. It appears to serve no purpose, as > it has only lines from layer two connecting to it. > > However, *under* the via is a tiny copper trace on layer 1 (make vias > invisible and you'll see it, but it does stick out a little on the > side). At least, so it seems. It turns out you have *1500* tiny > copper traces under that via. > > So, shut off layer 2, use a rectangular selection box to grab all > those traces and the via, and delete them. Then mitering works fine. > > > _______________________________________________ > geda-user mailing list > [email protected] > http://www.seul.org/cgi-bin/mailman/listinfo/geda-user _________________________________________________________________ Get your vacation photos on your phone! [1]Click here. References 1. http://windowsliveformobile.com/en-us/photos/default.aspx?&OCID=0809TL-HM
_______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
