Hi Dan, On Tue, 2009-10-06 at 12:55 -0500, Dan White wrote: > I have begun to use gaf for an audio prototyping board for a > University course I'm teaching. The gEDA site claims no > schematic-to-symbol generator so I rolled my own and am making the > first-pass available to start to fill the gap. > > I am been using the gEDA Binary Suite 0.0.2 for the moment until I get > around to moving my machines to newer releases simultaneously, so the > script is only tested on that version of gschem. However it gives > satisfactory results on my current collection of project schematic > sheets. > > Included is "usb-codec.sch" and "ingenious-A.sch" with embedded > symbols and their corresponding generated symbol. The script puts all > input and passive ports on the left side, outputs on the right, and > power ports on the top/bottom. The symbol box is sized according to > the minimum size to display all port label text without overlapping. > > Finally, in the archive is the project Makefile as a user example for > new-comers. The project isn't in PCB layout stage, nor have I used > simulations, so those aspects have not been vetted yet. > > http://www.whiteaudio.com/proj/sch2sym.tar.gz > > Comments are welcome, > > Dan >
A shell script version by Andrew Tan comes to mind: http://www.seul.org/pipermail/geda-dev/2007-September/003804.html The tarball is to be found here (is scrubbed from the geda-dev list): http://www.xs4all.nl/~ljh4timm/downloads/geda_sch2sym.tar.gz Kind regards, Bert Timmerman _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
