Hi all, I make a schematic, find no fault in the DRC (gnetlist -g drc2 powerbox.sch). I generated the pcb files with "gsch2pcb Projectfile" I open the generated "powerbox_pcb.net" and spread out the footprints. I import the netlist and see "GND" has been created even though it doesn't exist in the schematic. I noticed it on conn2 from which conn2-1 and conn2-2 are both connected and the same goes for C5.
Reference files: Schematic: http://pastebin.ca/1627825 Netlist: http://pastebin.ca/1627833 LT1086-4: http://pastebin.ca/1627852 What am I doing wrong here? I all ready tried supplying netnames, and re-creating the complete schematic from scratch (which is supplied). [Projectfile] schematics powerbox.sch output-name powerbox_pcb elements-dir /home/remy/Projects/Bike elektronics/library/pcb/vreg elements-dir /home/remy/Projects/Bike elektronics/library/pcb/Diode elements-dir /home/remy/Projects/Bike elektronics/library/pcb/Potmeters elements-dir /home/remy/Projects/Bike elektronics/library/pcb/Connectors [/Projectfile] Note: Tried with "skip-m4" which made no difference. gsch2pcb gave me the following output: [output] $ gsch2pcb Projectfile --------------------------------- gEDA/gnetlist pcbpins Backend This backend is EXPERIMENTAL Use at your own risk! --------------------------------- Using the m4 processor for pcb footprints ---------------------------------- Done processing. Work performed: 16 file elements and 21 m4 elements added to powerbox_pcb.pcb. Next step: 1. Run pcb on your file powerbox_pcb.pcb. You will find all your footprints in a bundle ready for you to place or disperse with "Select -> Disperse all elements" in PCB. 2. From within PCB, select "File -> Load netlist file" and select powerbox_pcb.net to load the netlist. 3. From within PCB, enter :ExecuteFile(powerbox_pcb.cmd) to propagate the pin names of all footprints to the layout. [/output] Thanks in advance. Greetings, Remy _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
