I have a schematic that I have checked using gnetlist drc2. All is ok, as I have inserted the n/c symbol that has been refered to in several posts. Not sure which backend to use to generate the netlist however. Do I use -g gsch2pcb? or -g geda? Regardless, when launching gsch2pcb, pcb also opens, along with its log. Using pcb, I load a netlist file. Pcb log says :"Importing PCB netlist /home/barry/gEDA/Polly Projects/Current Shunt/[1]output.net" This makes me think that the netlist is in. Then I return to gsch2pcb gui and press the "update layout" button, go back to the pcb log and get this: "Can't add rat lines because no netlist is loaded." (Serious explitive at this point!) I am at a standstill now, because the wiki tutorial gschem->gsch2pcb->PCB "Simple Example" doesn't refer at all to netlists and as a result I'm not sure what's going on. Someone straighten me out? -- Thank you, Barry
References 1. http://output.net/
_______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
