On Wed, 2009-11-11 at 15:25 +0100, michalwd1979 wrote: > > We have really smart people in this list, so someone may guess what > your > > problem is. > > > > What I would do to make life of these smart people easier: > > Test with stable pcb snapshot. > > Tested with pcb 20091103 - exactly the same problem. > > > Test with your last saved board without these problems. > > Compare older copies of netlist/schematics with recent one to see if > > something was changed. > > Last copy that works right, is very little different from current. I > changed only some clearances (only polygons were affected). No tracks > or pads added. The schematic also have not changed. I've even tried > generate and load new netlist but this did not change anything. > > > > > If this does not help, or problem is related to development version > of > > pcb: Make board available for developers (if possible stripped down > > version with same problem). > > I can provide the pcb file to any person that is interested. If > anybody wants to check this please let me know and I will send the > board. > > Best Regards, > Michael W. >
That is interesting. Maybe it is related to the bug I found with debug option and Peter C already has kind of solved? Another idea: May it be related to the dirt traces which result of PCBs internal rounding errors, resulting in very short traces, 0.01 mil or so. I have generated a lot of then on my DSO board, but I always tried to remove them again. These dirt may generate shorts? Of course you can send a copy of your board to me, I can test with pcb20091103. But I am not a developer and not too smart, so my chances are not too good. Best regards Stefan Saleswki _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
