On 11/30/09, Gabriel Paubert <[email protected]> wrote: > Now what's the difference between that command and a more generic > SetViaMask with zero for the mask size
Good point. Cheers, Ineiev
From d216ed3d969b0b2a6d9134dd0bfbaa6e07e77f76 Mon Sep 17 00:00:00 2001 From: Bert Timmerman <[email protected]> Date: Sun, 29 Nov 2009 10:24:26 +0100 Subject: [PATCH] Add SetMask action Action to allow for setting of a solder mask {,gap} for {selected, all} pins, vias and pads. Sets the mask for the pin/via or pad, of all or selected pins and/or pads to the required value. What you can do is this: * Optionally the mask layer. * Select everything that needs the mask distance value. * :SetMask(gap,selected,pins,vias,8,mil) to change them to that amount. For all pins, vias and pads to set the mask distance you can do this: * Enable the mask layer. * :SetMask(gap,8,mil) to change them all to that amount. --- src/action.c | 150 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 150 insertions(+), 0 deletions(-) diff --git a/src/action.c b/src/action.c index 6b979d3..46637fc 100644 --- a/src/action.c +++ b/src/action.c @@ -4357,6 +4357,153 @@ ActionMinClearGap (int argc, char **argv, int x, int y) /* --------------------------------------------------------------------------- */ +static const char setmask_syntax[] = + "SetMask([Gap,] [Selected,] [(vias|pins|pads),]... value)"; + +static const char setmask_help[] = + "Sets the mask to the given value."; + +/* %start-doc actions SetMask + +...@table @code + +...@item Gap +Set mask gap relative to the copper rather than absolute value +of mask aperture. + +...@item Selected +Set mask of selected objects rather than all on the board + +...@item vias, pins, pads +Select types of objects. When none is issued, all types are assumed. + +...@item value +This can be increment (when begins with `+' or `-') or absolute value +(start with `=' to force), followed by optional units (mil or mm), +e.g. SetMask(=+10,mil). When no units follow, +PCB internal units (1/100 mil) are assumed. + +...@end table + +There is a MinMaskGap() action to increase the mask gap to vendor +minimum requirements. + +%end-doc */ + +static int +ActionSetMask (int argc, char **argv, int x, int y) +{ + char *delta = NULL; + char *units = NULL; + Boolean absolute; + int value, mask; + int flags = 0; + int ac = 0; + int vias = 0, pins = 0, pads = 0, gap = 0; + + + if (ac < argc && strcasecmp (argv[ac], "gap") == 0) + { + gap = !0; + ac++; + } + + if (ac < argc && strcasecmp (argv[ac], "selected") == 0) + { + flags = SELECTEDFLAG; + ac++; + } + while (ac < argc) + { + if (!strcasecmp (argv[ac], "vias")) + vias = !0; + else if (!strcasecmp (argv[ac], "pads")) + pads = !0; + else if (!strcasecmp (argv[ac], "pins")) + pins = !0; + else break; + ac++; + } + + if (ac >= argc) + { + Message (_("SetMask: mask value must be provided\n")); + AFAIL (setmask); + } + + /* no object type selection issued - assume all */ + if (!(vias || pads || pins)) + vias = pads = pins = !0; + + delta = ARG (ac); + ac++; + units = ARG (ac); + if (++ac < argc) + { + Message (_("SetMask: too many arguments\n")); + AFAIL (setmask); + } + + value = 2 * GetValue (delta, units, &absolute); + if (absolute && !value) + value = -1; + + SaveUndoSerialNumber (); + if (pins || pads) + ELEMENT_LOOP (PCB->Data); + { + if (pins) + PIN_LOOP (element); + { + if (flags && !TEST_FLAGS (flags, pin)) + continue; + mask = value; + if (gap && absolute) + mask += pin->Thickness; + + ChangeObjectMaskSize (PIN_TYPE, element, pin, 0, + mask, absolute); + RestoreUndoSerialNumber (); + } + END_LOOP; /* PIN_LOOP */ + if (pads) + PAD_LOOP (element); + { + if (flags && !TEST_FLAGS (flags, pad)) + continue; + mask = value; + if (gap && absolute) + mask += pad->Thickness; + ChangeObjectMaskSize (PAD_TYPE, element, pad, 0, + mask, absolute); + RestoreUndoSerialNumber (); + } + END_LOOP; /* PAD_LOOP */ + } + END_LOOP; /* ELEMENT_LOOP */ + if (vias) + VIA_LOOP (PCB->Data); + { + if (flags && !TEST_FLAGS (flags, via)) + continue; + mask = value; + if (gap && absolute) + mask += via->Thickness; + ChangeObjectMaskSize (VIA_TYPE, via, 0, 0, + mask, absolute); + RestoreUndoSerialNumber (); + } + END_LOOP; /* VIA_LOOP */ + if (Bumped) + { + IncrementUndoSerialNumber (); + gui->invalidate_all (); + } + return 0; +} + +/* --------------------------------------------------------------------------- */ + static const char changepinname_syntax[] = "ChangePinName(ElementName,PinNumber,PinName)"; @@ -6919,6 +7066,9 @@ HID_Action action_action_list[] = { {"SaveTo", 0, ActionSaveTo, saveto_help, saveto_syntax} , + {"SetMask", 0, ActionSetMask, + setmask_help, setmask_syntax} + , {"SetSquare", 0, ActionSetSquare, setsquare_help, setsquare_syntax} , -- 1.6.5.3
_______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
