On Sat, 2010-02-27 at 15:56 -0500, Dave McGuire wrote: > On Feb 27, 2010, at 3:36 PM, Peter Clifton wrote: > >> Here's one of each. :) > >> > >> http://www.flickr.com/photos/oskay/4393096672/sizes/o/ > >> http://www.flickr.com/photos/oskay/4393113304/sizes/o/ > > > > Hi, > > > > Have you ever looked at the GL branch of PCB (my repository here: > > > > git clone git://repo.or.cz/geda-pcb/pcjc2.git > > git checkout -b before_pours origin/before_pours > > > > configure with --enable-gl > > > > (Build). > > I get this: > > configure: error: You don't seem to have the GL library headers > installed.
You will need them, wherever they come from. I'm not familiar with how you get development headers on OS-X, nor how the X11 / GL stuff integrates on that platform. You will also need to build and install gtkglext for MacOS X, which will probably require the above issues to be resolved as well. It should work (they claim so).. I just don't know what the prerequisites will be. http://gtkglext.darwinports.com/ ?? Perhaps there are also macports / fink versions. -- Peter Clifton Electrical Engineering Division, Engineering Department, University of Cambridge, 9, JJ Thomson Avenue, Cambridge CB3 0FA Tel: +44 (0)7729 980173 - (No signal in the lab!) _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
