On Sat, 2010-04-17 at 13:10 +0200, Stefan Salewski wrote: > On Sat, 2010-04-17 at 12:37 +0200, Stefan Salewski wrote: > > > > > I think I have to rename all of them, including John Luciani's. > > > > > > You have components in your schematic named Rf and Cf without numbers. > These seems to have no connection in the netlist. > The missing number in refdes seems to be a problem. > >
OK, seems to be all fixed now, see http://www.ssalewski.de/tmp/armin20100417.tar refdes without a digit at the end of the name seems to be indeed a big problem, I am not sure if this is stated at a prominent location in the gEDA/PCB documentation? Minus signs in footprint names can be a problem, this should be well known for people reading this list. But I do not know if this was indeed a problem for your current design, I am too lazy to rename all back to minus signs now. Best regards Stefan _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
