John Luciani wrote:
When this happens to me it is caused by not starting
on the end point. Sometimes, especially with 45 deg traces, the end point
can be a little tough to select. Also if you have changed to a
coarser grid it can be more difficult to hit the end point.
(* jcl *)
These particular traces are 8 mil, and the grid space is 1 mill. I'm
fairly certain that it connects to the right place, but it's as if the
grid spacing is off by less than 1 mil so the trace is off kilter, ever
so slightly.
_______________________________________________
geda-user mailing list
[email protected]
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
