Are you allowing all direction lines? While if you are only drawing a straight line between 2 points there should not be a jagged line.
Can you strip it down to one example trace? And send the file. Steve On Oct 7, 2010, at 7:09 PM, gene glick <[email protected]> wrote: > I hope the attachment comes through. If not, I'll post it somewhere. > > I cannot get rid of the jagged diagonal lines on my design. There's lots of > them. The picture shows a couple of examples. I've tried different grid > sizes, line widths, but nothing fixes the problem. Redrawing them in order to > eliminate any sections does not help. On PCB, it shows at some zoom levels > but not others. It is in the gerbers as well and it is in the photo-mode > picture I attached. > > PCB 2009 > > > It passes my design rules, but looks ugly. > > Traces are 8 mil, spacing is 8 mil. Grid space is 1 mil. > > gene > <crookedTraces.png> > > > _______________________________________________ > geda-user mailing list > [email protected] > http://www.seul.org/cgi-bin/mailman/listinfo/geda-user _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
