jeffrey antony: ... > 1) I have some problems with the PCB files in this design. I am not > able to move component descriptors. At present many of the component > descriptors are overlapped (eg: R4 and LED14). Please let me know > how to move these. In gschem moving the component descriptors are > easy to move.
I just point at the descriptor, press left button an move it. But if I select it (shown as some light colour), I cannot move it, if so, just leftclick it first to deselect it. If you don't show the solder layer (View->Shown Layers->Solder, or ctrl-2), it is easier, because then you won't by mistake grab a copper trace. You can rightclick the descriptor, and then it will rotate 90°, can be nice. > 2) If possible can anyone go through the design files and give a reply about > the board? ... On the screen (with pcb), led0/led1/led13 overlaps, but in http://i254.photobucket.com/albums/hh94/jeffreyantony/P1010578.jpg, they come out just fine. Maybe you are using the wrong footprint. You can add the jumpers in the pcb file as 0-Ohm resistors if you like. That would make the six anonymous holes more understandable. You could make a jumper footprint if you like or use mine at http://aspodata.se/git/openhw/share/pcb/_passive/ Regards, /Karl Hammar --------- Aspö Data Lilla Aspö 148 S-742 94 Östhammar Sweden +46 173 140 57 _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
