Hi Peter, > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Bert Timmerman > Sent: Saturday, November 06, 2010 2:35 PM > To: 'gEDA user mailing list' > Subject: Re: gEDA-user: PCB+GL Testers (please test) > > Hi Peter, > > > -----Original Message----- > > From: [email protected] > > [mailto:[email protected]] On Behalf Of Peter Clifton > > Sent: Thursday, November 04, 2010 1:51 AM > > To: gEDA user mailing list > > Subject: Re: gEDA-user: PCB+GL Testers (please test) > > > > On Wed, 2010-11-03 at 22:04 +0100, Kai-Martin Knaak wrote: > > > Peter Clifton wrote: > > > > > > > I've got a load of changes I've been working on recently > > in PCB+GL, > > > > this time on my "local_customisation_no_pours" branch. > > > > > > For those not familiar with git, these are the commands I ran to > > > install Peters version in /usr/local/bin/pcb-test : > > > > > > /------------------------ > > > git clone git://repo.or.cz/geda-pcb/pcjc2.git > > > cd pcjc2 > > > git checkout -b local_customisation_no_pours > > > > Did this work and give you the 3D / GL stuff? (Does git > automatically > > pick the right remote branch?) > > > > I would have done: > > > > git checkout -b local_customisation_no_pours > > origin/local_customisation_no_pours > > > > But since I learnt to do that some while back, things might > have got > > easier since. > > > > -- > > Peter Clifton > > > > Electrical Engineering Division, > > Engineering Department, > > University of Cambridge, > > 9, JJ Thomson Avenue, > > Cambridge > > CB3 0FA > > > > Tel: +44 (0)7729 980173 - (No signal in the lab!) > > Tel: +44 (0)1223 748328 - (Shared lab phone, ask for me) > > > > > > > > I tried the above and ran into trouble with the requirement > of gtkglext-1.0: > there seems to be no such RPM package available for Fedora 13 ;-( > > So I will try to find (or build) and install a package this weekend. > > To be continued ... > > Kind regards, > > Bert Timmerman > >
The LED2.pcb example gives: 1.2 ... 1.3 redraws per second on your local_customisation_no_pours branch. 15.8 redraws per second on your before_pours branch. 81.8 redraws per second on the pcb-20091103 (yum installed) out of the box RPM version . 59.8 redraws per second on pcb.gpleda.org/pcb.git HEAD (just sync'ed). 66.6 redraws per second on pcb-20100929 tarball. Hardware is a Packard Bell Notebook (MH35U070) 1.8GB with 1.89 MHz DualCore T2390 and SIS Mirage 3+ graphics (256 MB). Hope this helps a bit. Kind regards, Bert Timmerman. _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
