> A similar "track is component" scenario: > > PCB fuse track - a dirty trick I've seen in some Honywell boiler > controllers.. where a deliberately thin trace is used to act as a fuse.
That certainly is a dirty trick! (But on a very tight budget it could make sense). So there are several use cases for treating copper as non-connecting: * low value resistors * fuses * low value inductors * aerials * contacts for solder switches (eg SPDT in solder) _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
