I found this yesterday:
[1]http://www.sparkfun.com/tutorials/59
Hope it helps?
Message: 9
Date: Thu, 27 Jan 2011 10:47:37 -0500
From: Rob Butts [2]<[email protected]>
Subject: gEDA-user: Soldering minute smt
To: gEDA user mailing list [3]<[email protected]>
Message-ID:
[4]<[email protected]>
Content-Type: text/plain; charset="iso-8859-1"
Holy miniature footprints Batman!!!
I'm trying to solder a 10 pin MSOP chip to a home made circuit board. The
pitch of this chip is just 0.5 mm. We tried using the slightests of dabs of
solder across the pins and then used a heat gun the melt the solder but now
I have a chip soldered down with two five pin solder blobs on each side. My
next step is to use solder wick to try and wick up the excess but I wanted
to see if there is a better way of doing this first.
Thanks
--
William Estrada
Mt Umunhum, CA, USA
[5]HTTP://64.124.13.3 ( Mt-Umunhum-Wireless.net )
Skype: MrUmunhum
References
1. http://www.sparkfun.com/tutorials/59
2. mailto:[email protected]
3. mailto:[email protected]
4. mailto:[email protected]
5. http://64.124.13.3/
_______________________________________________
geda-user mailing list
[email protected]
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
