On Tue, Mar 01, 2011 at 05:59:42PM -0800, Daniel B. Thurman wrote: > > Hi, I found the time to go back to my past > and revisit spice (used older Berkeley spice then) > so I tried a simple RLC circuit from the following > link and using ngspice: > > http://www.allaboutcircuits.com/vol_2/chpt_6/3.html > > Unfortunately, I was not able to duplicate the > plots as shown in the above link. I am assuming > that the author is using something other than ngspice > or I am doing something wrong? > > Attached is the rlc.sch file with the same circuit sans > the circuit netlist but it can be easily generated: > > > gnetlist -o rlc.cir -g spice-sdb rlc.sch > > The contents of rlc.cir is: > > ********************************************************* > * Spice file generated by gnetlist * > * spice-sdb version 4.28.2007 by SDB -- * > * provides advanced spice netlisting capability. * > * Documentation at http://www.brorson.com/gEDA/SPICE/ * > ********************************************************* > *============== Begin SPICE netlist of main design ============ > L1 0 3 10mH > C1 3 2 10uF > R1 1 2 1 > V1 1 0 dc 0 ac 1 sin > .end >
L1 is 100mH there. Could it help? -- VZh _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
