On Friday 30 August 2002 02:43 am, Piotr Miarecki wrote: > Please send me your setup.cfg (to [EMAIL PROTECTED]), I'll try to fix > the problem. > > > Piotr Miarecki
Here it is. John G Austin TX
[SOFTWARE] Name = GPL Electronic Design Automation Suite Version = 0.3 Release = License = GPL Desc = gEDA is GPL EDA software for electronics. It is freely available for different platforms such as Windows, Linux and Solaris. Dirname = geda Package = schematic-group pcb-group spice-group verilog-group # # COMPONENT GROUPS # [schematic-group] Name = Schematic Version = Release = License = Desc = Tools to create schematics used for further design of PCB layouts, analog or digital simulation. Based on GAF 20020527. FlagDisp = YES FlagInst = NO ReqList = Package = geda-gschem geda-symbols geda-gsymcheck geda-gnetlist geda-utils geda-docs libgeda Filename = Dirname = BldTools = BldCmd = PostInst = [pcb-group] Name = PCB Version = Release = License = Desc = Tools to design PCB layout, even with autorouter, generate Gerber and Excellon files and verify them. Based on PCB 1.7.3 (currently not supported), MUCS PCB 3.0.1 and GERBV 0.8. FlagDisp = YES FlagInst = NO ReqList = Package = mucs_pcb gerbv Filename = Dirname = BldTools = BldCmd = PostInst = [spice-group] Name = SPICE Version = Release = License = Desc = Tools to simulate analog circuits and watch results in a waveform viewer. Based on NG-SPICE rework-14 and GWAVE 20020122. Additionally tools: GNUCAP 0.31 and GMOS 0.2. FlagDisp = YES FlagInst = NO ReqList = Package = ng-spice gnucap gmos gwave Filename = Dirname = BldTools = BldCmd = PostInst = [verilog-group] Name = Verilog Version = Release = License = Desc = Tools to simulate digital circuits, watch results in a waveform viewer and to synthesize them. All using Verilog language. Based on Icarus Verilog 0.6.1 and GtkWave 2.0. FlagDisp = YES FlagInst = NO ReqList = Package = verilog gtkwave Filename = Dirname = BldTools = BldCmd = PostInst = [vhdl-group] Name = VHDL Version = Release = License = Desc = Tools to simulate digital circuits, watch results in a waveform viewer and to synthesize them. All using VHDL language. FlagDisp = YES FlagInst = NO ReqList = Package = Filename = Dirname = BldTools = BldCmd = PostInst = [vlsi-group] Name = VLSI Version = Release = License = Desc = Tools to design, simulate and synthesize circuits on VLSI layouts. FlagDisp = YES FlagInst = NO ReqList = Package = alliance alliance-common Filename = Dirname = BldTools = BldCmd = PostInst = [syslib-group] Name = System libraries Version = Release = License = Desc = Set of libraries that are included in most of OS distributions. Used if the libraries are missing or exist in incompatible versions. FlagDisp = YES FlagInst = NO ReqList = Package = guile guile-gtk libgdgeda zlib libpng libstroke Filename = Dirname = BldTools = BldCmd = PostInst = [geda-gschem] Name = Editor GSCHEM Version = 20020825 Release = License = GPL Desc = GSCHEM is the schematic capture program which is part gEDA toolset. It is used to draw electronic schematics and symbols. FlagDisp = YES FlagInst = YES ReqList = libgeda geda-symbols libgdgeda zlib libstroke Package = Filename = geda-gschem-20020825.tar.gz Dirname = geda-gschem-20020825 BldTools = BldCmd = ./configure --prefix=$PREFIX; make PostInst = make install [geda-symbols] Name = Symbol Library Version = 20020825 Release = License = GPL Desc = GSCHEM symbol library. FlagDisp = YES FlagInst = YES ReqList = Package = Filename = geda-symbols-20020825.tar.gz Dirname = geda-symbols-20020825 BldTools = BldCmd = ./configure --prefix=$PREFIX; make PostInst = make install [geda-gsymcheck] Name = Symbol Checker GSYMCHECK Version = 20020825 Release = License = GPL Desc = GSCHEM symbol checking tool (GSYMCHECK). FlagDisp = YES FlagInst = YES ReqList = geda-gschem Package = Filename = geda-gsymcheck-20020825.tar.gz Dirname = geda-gsymcheck-20020825 BldTools = BldCmd = ./configure --prefix=$PREFIX; make PostInst = make install [geda-gnetlist] Name = Export Filters GNETLIST Version = 20020825 Release = License = GPL Desc = GSCHEM export filters and schematic conversion tool (GNETLIST). FlagDisp = YES FlagInst = YES ReqList = geda-gschem Package = Filename = geda-gnetlist-20020825.tar.gz Dirname = geda-gnetlist-20020825 BldTools = BldCmd = ./configure --prefix=$PREFIX; make PostInst = make install [geda-utils] Name = Utilities Version = 20020825 Release = License = GPL Desc = GSCHEM utilities. FlagDisp = YES FlagInst = YES ReqList = geda-gschem Package = Filename = geda-utils-20020825.tar.gz Dirname = geda-utils-20020825 BldTools = BldCmd = ./configure --prefix=$PREFIX; make PostInst = make install [geda-docs] Name = Documentation Version = 20020527 Release = License = GPL Desc = GSCHEM original documentation. FlagDisp = YES FlagInst = YES ReqList = geda-gschem Package = Filename = geda-docs-20020527.tar.gz Dirname = geda-docs-20020527 BldTools = BldCmd = ./configure --prefix=$PREFIX; make PostInst = make install [libgeda] Name = Runtime Library LIBGEDA Version = 20020825 Release = License = GPL Desc = GSCHEM runtime library LIBGEDA. FlagDisp = NO FlagInst = NO ReqList = guile Package = Filename = libgeda-20020825.tar.gz Dirname = libgeda-20020825 BldTools = BldCmd = ./configure --prefix=$PREFIX; make PostInst = make install [mucs_pcb] Name = MUCS-PCB Version = 3.0 Release = 1 License = GPL Desc = Autorouter and tools to import PCB from ViewLogic. It was created at the Manchester University, Department of Computer Science. Currently not useful with gEDA Suite. FlagDisp = YES FlagInst = YES ReqList = Package = Filename = mucs_pcb-3.0.1.tar.gz Dirname = mucs_pcb-3.0.1 BldTools = BldCmd = ./configure --prefix=$PREFIX; make PostInst = make install [gerbv] Name = Gerber/Excellon File Viewer GERBV Version = 0.0 Release = 9 License = GPL Desc = Gerber and Excellon File Viewer. FlagDisp = YES FlagInst = YES ReqList = gtk guile Package = Filename = gerbv-0.0.9.tar.gz Dirname = gerbv-0.0.9 BldTools = BldCmd = ./configure --prefix=$PREFIX; make PostInst = make install [ng-spice] Name = NG-SPICE Simulator Version = rework-14 Release = License = GPL Desc = NG-SPICE is a general purpose circuit simulation program for nonlinear DC, nonlinear transient and linear AC analyses. It is based on Berkeley SPICE 3. FlagDisp = YES FlagInst = YES ReqList = Package = Filename = ng-spice-rework-14.tar.gz Dirname = ng-spice-rework-14 BldTools = BldCmd = ./configure --prefix=$PREFIX; make PostInst = make install [gnucap] Name = Circuit Analysis Package GNUCAP Version = 0.31 Release = License = GPL Desc = A tool alternate for SPICE. Used for simulation of analog and digital circuits. FlagDisp = YES FlagInst = YES ReqList = Package = Filename = gnucap-0.31.tar.gz Dirname = gnucap-0.31 BldTools = BldCmd = ./configure --prefix=$PREFIX; make PostInst = make install [gmos] Name = GMOS MOSFET Modelling Software Version = 0.2 Release = 0 License = GPL Desc = MOSFET Modelling Software FlagDisp = YES FlagInst = YES ReqList = Package = Filename = gmos-0.2.0.tar.gz Dirname = gmos-0.2.0 BldTools = BldCmd = ./configure --prefix=$PREFIX; make File = BIN, "0755", "src/gmos", "bin/gmos" [gwave] Name = Analog Waveform Viewer Version = 20020122 Release = License = GPL Desc = Waveform viewer for SPICE and GNUCAP. FlagDisp = YES FlagInst = YES ReqList = guile guile-gtk Package = Filename = gwave-20020122.tar.gz Dirname = gwave-20020122 BldTools = BldCmd = ./configure --prefix=$PREFIX; make PostInst = make install [verilog] Name = ICARUS Verilog Simulator Version = snapshot Release = 20020817 License = GPL Desc = ICARUS verilog compiler and simulator. FlagDisp = YES FlagInst = YES ReqList = bison flex gperf Package = Filename = verilog-20020817.tar.gz Dirname = verilog-20020817 BldTools = BldCmd = ./configure --prefix=$PREFIX; make PostInst = make install [gtkwave] Name = Digital Waveform Viewer Version = 2.0 Release = 0pre1-20020705 License = GPL Desc = Digital waveform viewer. FlagDisp = YES FlagInst = YES ReqList = Package = Filename = gtkwave-2.0.0pre1-20020705.tar.gz Dirname = gtkwave-2.0.0pre1-20020705 BldTools = BldCmd = ./configure --prefix=$PREFIX; make PostInst = make install [guile] Name = Guile - SCHEME Interpreter Version = 1.4 Release = geda License = GPL Desc = FlagDisp = YES FlagInst = NO ReqList = Package = Filename = guile-1.4-geda.tar.gz Dirname = guile-1.4 BldTools = BldCmd = ./configure --prefix=$PREFIX; make PostInst = make install [guile-gtk] Name = Guile - Gtk Binding Version = 0.19 Release = License = GPL Desc = FlagDisp = YES FlagInst = NO ReqList = guile Package = Filename = guile-gtk-0.19.tar.gz Dirname = guile-gtk-0.19 BldTools = BldCmd = ./configure --prefix=$PREFIX; make PostInst = make install [libgdgeda] Name = LIBGD Graphic Manipulation Library Version = 1.8 Release = License = GPL Desc = gEDA version of a graphic manipulation library. FlagDisp = YES FlagInst = NO ReqList = Package = Filename = libgdgeda-1.8.tar.gz Dirname = libgdgeda-1.8 BldTools = BldCmd = ./configure --prefix=$PREFIX; make PostInst = make install [zlib] Name = ZLIB Compression Library Version = 1.1 Release = 3 License = GPL Desc = ZLib is a general purpose data compression library. FlagDisp = YES FlagInst = NO ReqList = Package = Filename = zlib-1.1.3.tar.gz Dirname = zlib-1.1.3 BldTools = BldCmd = ./configure --prefix=$PREFIX; make File = BIN, "0755", "libz.a", "lib/libz.a" File = BIN, "0644", "zlib.h", "include/zlib.h" File = BIN, "0644", "zconf.h", "include/zconf.h" [libpng] Name = LIBPNG Version = 1.0 Release = 8 License = Glenn Randers-Pehrson Desc = FlagDisp = YES FlagInst = NO ReqList = zlib Package = Filename = libpng-1.0.8.tar.gz Dirname = libpng-1.0.8 BldTools = BldCmd = cp scripts/makefile.linux Makefile; make File = BIN, "0755", "libpng.a", "lib/libpng.a" File = BIN, "0755", "libpng.so.2.1.0.8", "lib/libpng.so.2.1.0.8" File = LNK, "0777", "lib/libpng.so.2.1.0.8", "lib/libpng.so.2" File = LNK, "0777", "lib/libpng.so.2.1.0.8", "lib/libpng.so" File = BIN, "0644", "png.h", "include/png.h" File = BIN, "0644", "pngconf.h", "include/pngconf.h" [libstroke] Name = LIBSTROKE Stroke Translation Library Version = 0.5 Release = 1 License = GPL Desc = LibStroke is a stroke translation library. FlagDisp = YES FlagInst = NO ReqList = Package = Filename = libstroke-0.5.1.tar.gz Dirname = libstroke-0.5.1 BldTools = BldCmd = ./configure --prefix=$PREFIX; make PostInst = make install
