[ Ales here, I'm reposting this since majordomo didn't recognize the e-mail as being subscribed to the geda-dev/user mailinglist. Please note that I am not the original author. ]
-- Cut here -- From: Marc Reibel <[EMAIL PROTECTED]> On Sun, 1 Jun 2003 [EMAIL PROTECTED] wrote: > Hi, > > first of all, thank you for building an developement environment under GPL! > > Probably I have the most stupid question you ever heard. I want to use the > PIC12C5xx and there are only the 6 signal pins in the symbol included. > 1. How do I connect the Power and GND to the chip? There are GND and VDD-nets used in the symbol. Just make sure you connect nets named "GND" and "VDD" to some powersource in your schematics and gnetlist will do the trick. > 2. Is there an automated check if all power and GND connected (ERC) to make > sure I did not forget half of the supplys? power- and vdd-nets will be connected automatically, so no need for manual ERC. > Thanks > > Uwe HTH, Marc ---- Dipl.-Wirtsch.-Ing. Marc Reibel <[EMAIL PROTECTED]> PGP-ID: 21AC7C78
