Thanks a lot Steve, you have been of great help. Olgierd
El jue, 02-10-2003 a las 09:37, Stephen Meier escribió: > These instructions are so good that they ought to be cleaned up and > added to the geda document web site! > > Steve M. > > > Stephen Meier wrote: > > > I use gnetlist instead of gsch2pcb > > > > The attached url has a set of really good instructions on how to get > > gschem and pcb working together. > > > > http://archives.seul.org/geda/dev/Aug-2001/msg00081.html > > > > Steve M. > > > > > > Olgierd Eysymontt wrote: > > > >> Hi, may be this post is a bit out of place, but I've not found another > >> way to solve the problem than asking. > >> > >> I have installed geda 20030901, pcb 1.99o (20030815) and gsch2pcb 0.9 > >> and 1.0 and I'm unable to make gsch2pcb to work on either versions, if I > >> use gsch2pcb I get, independent of including some elements or other > >> error messages: > >> > >> ERROR: Unbound variable: open-output-pipe > >> No elements found, so nothing to do. > >> > >> always the same message. I've tried in two different linux redhat 9 > >> machines with the same result, I've updated guile, made configuration > >> files, etc. The log files never had showed errors, so I think may be m4 > >> is the problem, but gschem2pcb works perfect and all the rest of the > >> suit gEDA works too, any idea ? > >> > >> Olgierd Eysymontt > >> > >> > >> > >> > >> > >> > > > > > > > > >
