[ Ales here, I'm reposting this since majordomo didn't recognize the e-mail as being subscribed to the geda-dev/geda-user mailinglist. ]
-- Cut here -- From: Holger Waechtler <[EMAIL PROTECTED]> Levente KOVACS wrote: > On Mon, 14 Jun 2004 17:22:09 -0400 > William Dieter <[EMAIL PROTECTED]> wrote: > > >>Is there any way to add clearance for lines in the same layer group as >>polygons, but in different layers? I am using pcb-20040530. > > > I think that does not makes so much sence. Imagine, that you have 2 > layer board. You have a line at the top layer, and a ground plane at the > bottom. Why should the botom layer cleard? Or, another example. You have > a 3 layer board. You want to make a stripline. How can you do this, if > you clear the top and the bottom layer with your line in the middle? In some cases you want to place a special (wider) clearance area around the board outline for all polygons and throw away all copper outside this outline -- in this case you would want to define this special clearance on the layer where the outline is drawn... Holger
