On Wed, Jan 12, 2005 at 10:05:42AM -0800, Steve Meier wrote: > Ok, pull out JEDEC Publication 95 Book three. Everybody with me and have
Where can I doenload JEDEC Publication 95 Book three ? Cl< > their copy handy ;) > > The following part matches the JEDEC specification for MO-178 which is a > version of SOT23-5 > > http://cache.national.com/ds/LP/LP3985.pdf > > I prefer the JEDEC-95 specification for packages because.... components > which reference them have the correct dimensions and pin numbering. > > The JEDEC standard JEP-95 may be viewed on line at www.jedec.org > To reach the JEP-95 pdf files you need to register for free. > > I am curious to know which SOT23-5 packages differ from the MO-178 > standard. Can some one post an example. > > Thanks, > > Steve Meier > > > On Wed, 2005-01-12 at 07:07, Daniel J Wisehart wrote: > > On Tuesday 11 January 2005 05:39, Dan McMahill wrote: > > > On Tue, Jan 11, 2005 at 12:14:40AM -0800, Matt Ettus wrote: > > > > Is there a SOT23-5 footprint somewhere in PCB? And does anyone have a > > > > mapping between SOTxx and SCxx numbers? > > > > > > There are some SOT and SC footprints in ~geda. Especially with these, > > > you really really really (I can't stress it enough) want to verify > > > the footprint before using them. This is because I know of at least > > > 2 different ways the pins on a SOT23-3 are numbered by different > > > vendors. > > > > I agree with that. We used the SOT23-5 footprint and it was wrong for our > > part, so we had to glue the parts on upside down on our prototype. :-( > > > > Regards, > > Daniel >
