Your welcome.
(* jcl *)
--- handsome greg <[EMAIL PROTECTED]> wrote:
> wow. i cant thank you enough! i did successfully
> get a footprint
> made, and i get all that now. the howto on the pcb
> site was missing a
> step. i think mouser re-added the switch to my
> project after i had
> already deleted it an replaced it with
> #108-1MS1T1B1M2QE which is
> pcmount. thanks for the catch though. that could
> have been bad =)
>
> serious thanks again!!!!
> handsome greg
>
> On Sat, 15 Jan 2005 19:38:18 -0800 (PST), John
> Luciani
> <[EMAIL PROTECTED]> wrote:
> > Below are footprints for the Mouser parts that
> > you mentioned. If you use them make sure you check
> > the dimensions (especially the audio jack). You
> > probably should change the name to something more
> > appropriate.
> >
> > I noticed that the toggle switch you listed has an
> > eyelet. You may want to look for a version of the
> > switch with a PC board terminal.
> >
> > Element(0x0 "jack" "" "" 210 550 0 100 0x0)
> > (
> > Pin(-200 -250 75 52 "" "1" 0x01)
> > Pin(-200 150 75 52 "" "2" 0x01)
> > Pin(300 250 75 52 "" "3" 0x01)
> > Pin(300 0 75 52 "" "4" 0x01)
> > Pin(0 -150 75 52 "" "5" 0x01)
> > Pin(-300 0 110 110 "" "6" 0x09)
> > Pin(200 150 110 110 "" "7" 0x09)
> > Pin(200 -150 110 110 "" "8" 0x09)
> > ElementLine(-313 472 -313 -510 10)
> > ElementLine(-313 -510 313 -510 10)
> > ElementLine(313 -510 313 472 10)
> > ElementLine(313 472 -313 472 10)
> > ElementLine(-188 472 -188 750 10)
> > ElementLine(-188 750 188 750 10)
> > ElementLine(188 750 188 472 10)
> > ElementArc(-300 0 60 60 0 360 10)
> > ElementArc(200 -150 60 60 0 360 10)
> > ElementArc(200 150 60 60 0 360 10)
> > Mark(0 0)
> > )
> >
> > Element(0x0 "pot" "" "" -313 760 0 100 0x0)
> > (
> > Pin(-313 671 150 110 "" "1" 0x01)
> > Pin(0 740 150 110 "" "2" 0x01)
> > Pin(313 671 150 110 "" "3" 0x01)
> > Pin(0 0 250 250 "" "4" 0x09)
> > ElementLine(-370 290 -370 640 10)
> > ElementLine(370 290 370 640 10)
> > ElementArc(0 0 130 130 0 360 10)
> > ElementArc(0 0 472 472 0 360 10)
> > ElementArc(0 0 740 740 60 60 10)
> > ElementArc(0 0 740 740 65 50 10)
> > Mark(0 0)
> > )
> >
> > Element(0x0 "switch" "" "" -267 -196 0 100 0x0)
> > (
> > Pin(-185 0 150 110 "" "1" 0x01)
> > Pin(0 0 150 110 "" "2" 0x01)
> > Pin(185 0 150 110 "" "3" 0x01)
> > ElementLine(-268 -135 -268 135 10)
> > ElementLine(-268 135 268 135 10)
> > ElementLine(268 135 268 -135 10)
> > ElementLine(268 -135 -268 -135 10)
> > Mark(0 0)
> > )
> >
> >
> > --- handsome greg <[EMAIL PROTECTED]> wrote:
> >
> > > i've been struggling to add my footprints (for
> > > mouser parts: 31VQ501,
> > > 108-1MS1T1B1M1QE, and 502-RN-112APC) to my pcb
> and
> > > im having a ton of
> > > trouble. i THOUGHT i successfully added an m4
> > > definition to
> > > /usr/share/pcb/m4 and ran the
> > > CreateLibrary{,Contents}.sh scripts to
> > > maybe update the library (?) and nothing.
> running
> > > gsch2pcb complains
> > > that it can't find my package name. i copied it
> > > from another one and
> > > it still doesnt work. i tried the graphical
> method
> > > (newlib i think
> > > its called) to no avail because i never got the
> > > "save buffer elements
> > > to file" menu item to actually DO anything (that
> i
> > > was aware of.) am
> > > i missing something? how do you guys do it? i
> am
> > > in fact having
> > > problems with pcb ANYWAY, probably because of
> the
> > > motif dependencies
> > > and misconfiguration... ALMOST enough reason to
> port
> > > it to gtk2.
> > > which, if i can finish this one freaking pcb by
> > > tomorrow night, i will
> > > have enough free time to do. =)
> > >
> > > thanks for any suggestions
> > > handsome greg
> > >
> >
> >
> > __________________________________
> > Do you Yahoo!?
> > Yahoo! Mail - You care about security. So do we.
> > http://promotions.yahoo.com/new_mail
> >
>
__________________________________
Do you Yahoo!?
All your favorites on one personal page � Try My Yahoo!
http://my.yahoo.com
