"Harold D. Skank" <[EMAIL PROTECTED]> wrote: > Secondly, I keep getting warnings that a short exists between my power > and ground planes.
Harold, that happened to me once. I actually had some very short traces that were hidden under the holes/pads. What can happen is a trace can be made with a knee really close to the center of a hole/pad. Then, let's say you delete that trace, but forget to delete the little knee connected to the pad. If the pad is big enough (or you make it bigger with key-s) and the trace is short enough, the pad can cover it totally. Since the pads are displayed on top, you'll have a hard time seeing it. Toggle pins/pads layer to see if this is the problem. Holes get plated, and PCB thinks that anything on a power plane is electrically connected to the plane so you get a shortckt error. Phil Taylor
