Once again, I thank you. The part I just hate about doing PCB work is doing new foot prints, you have been taking the pain out of that for everyone.
On Friday 26 August 2005 01:14 pm, John Luciani wrote: > I have the LTC TS8 package in my library which would be > > TSOT23-65P-280L1-8N__LTC_TS8_Package Seeing TSOT23-6 just does not immediately bring to my mind an eight pin part, when I looked through your list. The LTC_TS8 should have tho. Will keep the pad dimensions in mind when looking at the list in the future. > I also have an 18 circuit Hirose FPC connector which would be > CON_FPC-50P-18C-1R-18N__Hirose_FH12-18S-0.5SH Looks like it should work fine in place of the Molex 52893-1890 as far as I can tell on my ink jet paper print out; very accurate test I know ;-). I need to order a couple of the DigiKey equivalents and check them out as well. For any one new to PCB do check out John's foot print and tool library: http://www.luciani.org/geda/geda-index.html > On 8/26/05, Bob Paddock <[EMAIL PROTECTED]> wrote: > > Anyone have SOT-23-8, eight pins, footprint as used by the Linear-Tech > > LT3436?: > > > > http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1003,C1042,C103 > >1,C1061,P2245,D1687 > > > > Anyone have any experience with Pictiva OLED displays in general, and > > footprint for their Molex connector?: > > > > http://www.molex.com/ > > 52893-1890 > > 0.5mm Pitch Easy_on FFC/FPC 18 circuits. -- http://www.softwaresafety.net/ http://www.unusualresearch.com/ http://www.bpaddock.com/
