That is fine, Stuart. Everything compiled and installed up to PCB. PCB failed:
checking for gtk+-2.0 >= 2.4.0... Requested 'gtk+-2.0 >= 2.4.0' but version of GTK+ is 2.2.4 configure: error: Cannot find gtk+ >= 2.4.0, install it and rerun ./configure Failure executing command ./configure --prefix=/usr/local/bin/geda-install, ReturnCode = 1 I wish I knew where to get the gtk binary release for SuSE 9.1. Building it from the sources does not sound fun. Regards, Daniel On Saturday 27 August 2005 09:21, Stuart Brorson wrote: > Daniel -- > > Thanks for the report. Do you mind if I stick this note into teh > INSTALL.SuSE file? > > Also, I remain a little bit concerned. When I create the CD, I > "freeze" the python stuff, and create an executable "install.exe", > which is supposed to have all dependencies wrapped up in it. (The > shell script "install" just calls this executable.) Therefore, if you > got the installer to work by installing some new stuff, it suggeests > that the freeze process doesn't do 100% of the job. > > I will look into this. Meanwhile, please do let us know of your > success/failure. > > Finally, the installer does check for wxGTK's version. I think you > need 2.5.2 or above, but I don't recall. You can loook at the source > -- install.py -- to see what version is required. > > Stuart > > > Hello Stuart, > > > > I have the GUI from the 20050823 installer working on the install now. I > > noticed that my machine had libglade2, but not libglade or glade, so I > > installed them. When I did Yast2 picked up a bunch of Gnome dependencies > > that I also needed. Then I re-ran the pango-querymodules program. The > > next time I tried the installer it started up just fine. > > > > I had already installed wxGTK, but the installer decided it needed to > > install it--a later version?--again. It took quite a while, but it did > > not time out even though I was using the 0823 installer. > > > > At the moment the installer is installing a bunch of connector symbols. > > I should know fairly soon if it is going to succeed or not. > > > > More later, > > Daniel > > > > On Friday 26 August 2005 07:36, Stuart Brorson wrote: > > > This is interesting. I last used glade on a newer machine, which > > > placed a bunch of new GTK properties into the glade file. THen I > > > froze the distribution on an older machine, which may not recognize > > > new glade stuff. It should just give you warnings, though. > > > > > > *Sigh* Version skew is one of the problems Linux has > > > w.r.t. mainstream adoption. Trying to create portable software for > > > Linux is more difficult than for Windoze because Linux developers > > > aren't as concerned with maintaining backward compatability as they > > > are with implementing the latest gee-whiz kewl feature. > > > > > > I will try to fix this issue over the weekend. > > > > > > Stuart > > > > > > > Hello Stuart, > > > > > > > > Many thanks for creating the installer 20050825. Unfortunately, it > > > > is failing for me on Suse 9.1. When I run /media/cdrom/installer > > > > --log I see: > > > > > > > > > > > > (installer.exe:25431): libglade-WARNING **: unknown property > > > > `decorated' for class `GtkWindow' > > > > > > > > (installer.exe:25431): libglade-WARNING **: unknown property > > > > `gravity' for class `GtkWindow' > > > > > > > > (installer.exe:25431): libglade-WARNING **: unknown property > > > > `overwrite' for class `GtkTextView' > > > > > > > > (installer.exe:25431): libglade-WARNING **: unknown property > > > > `accepts_tab' for class `GtkTextView' > > > > > > > > (installer.exe:25431): Pango-WARNING **: No builtin or dynamically > > > > loaded modules > > > > were found. Pango will not work correctly. This probably means > > > > there was an error in the creation of: > > > > '/usr/local/etc/pango/pango.modules' > > > > You may be able to recreate this file by running pango-querymodules. > > > > > > > > (installer.exe:25431): GLib-GObject-CRITICAL **: g_object_ref: > > > > assertion `G_IS_OBJECT (object)' failed > > > > > > > > (installer.exe:25431): Pango-CRITICAL **: _pango_engine_shape_shape: > > > > assertion `PANGO_IS_FONT (font)' failed > > > > > > > > Pango-ERROR **: file shape.c: line 75 (pango_shape): assertion > > > > failed: (glyphs->num_glyphs > 0) > > > > aborting... > > > > /media/cdrom/installer: line 25: 25431 Aborted > > > > `dirname $0`/installer.exe $1 $2 > > > > > > > > > > > > So then I ran pango-querymodules and I see: > > > > > > > > > > > > # Pango Modules file > > > > # Automatically generated file, do not edit > > > > # > > > > # ModulesPath = /usr/local/lib/pango/1.4.0/modules > > > > # > > > > /usr/local/lib/pango/1.4.0/modules/pango-basic-x.so > > > > BasicScriptEngineX PangoEngineShape PangoRenderX common: > > > > /usr/local/lib/pango/1.4.0/modules/pango-thai-fc.so > > > > ThaiScriptEngineFc PangoEngineShape PangoRenderFc thai:* lao:* > > > > /usr/local/lib/pango/1.4.0/modules/pango-arabic-fc.so > > > > ArabicScriptEngineFc PangoEngineShape PangoRenderFc arabic:* > > > > /usr/local/lib/pango/1.4.0/modules/pango-indic-fc.so > > > > devaScriptEngineFc PangoEngineShape PangoRenderFc devanagari:* > > > > /usr/local/lib/pango/1.4.0/modules/pango-indic-fc.so > > > > bengScriptEngineFc PangoEngineShape PangoRenderFc bengali:* > > > > /usr/local/lib/pango/1.4.0/modules/pango-indic-fc.so > > > > guruScriptEngineFc PangoEngineShape PangoRenderFc gurmukhi:* > > > > /usr/local/lib/pango/1.4.0/modules/pango-indic-fc.so > > > > gujrScriptEngineFc PangoEngineShape PangoRenderFc gujarati:* > > > > /usr/local/lib/pango/1.4.0/modules/pango-indic-fc.so > > > > oryaScriptEngineFc PangoEngineShape PangoRenderFc oriya:* > > > > /usr/local/lib/pango/1.4.0/modules/pango-indic-fc.so > > > > tamlScriptEngineFc PangoEngineShape PangoRenderFc tamil:* > > > > /usr/local/lib/pango/1.4.0/modules/pango-indic-fc.so > > > > teluScriptEngineFc PangoEngineShape PangoRenderFc telugu:* > > > > /usr/local/lib/pango/1.4.0/modules/pango-indic-fc.so > > > > kndaScriptEngineFc PangoEngineShape PangoRenderFc kannada:* > > > > /usr/local/lib/pango/1.4.0/modules/pango-indic-fc.so > > > > mlymScriptEngineFc PangoEngineShape PangoRenderFc malayalam:* > > > > /usr/local/lib/pango/1.4.0/modules/pango-indic-fc.so > > > > sinhScriptEngineFc PangoEngineShape PangoRenderFc sinhala:* > > > > /usr/local/lib/pango/1.4.0/modules/pango-hangul-fc.so > > > > HangulScriptEngineFc PangoEngineShape PangoRenderFc hangul:* > > > > /usr/local/lib/pango/1.4.0/modules/pango-syriac-fc.so > > > > SyriacScriptEngineFc PangoEngineShape PangoRenderFc syriac:* > > > > /usr/local/lib/pango/1.4.0/modules/pango-basic-fc.so > > > > BasicScriptEngineFc PangoEngineShape PangoRenderFc armenian:* > > > > bopomofo:* cherokee:* coptic:* cyrillic:* deseret:* ethiopic:* > > > > georgian:* gothic:* greek:* han:* hiragana:* katakana:* latin:* > > > > ogham:* old-italic:* runic:* > > > > canadian-aboriginal:* yi:* braille:* cypriot:* limbu:* osmanya:* > > > > shavian:* linear-b:* ugaritic:* common: > > > > /usr/local/lib/pango/1.4.0/modules/pango-hebrew-fc.so > > > > HebrewScriptEngineFc PangoEngineShape PangoRenderFc hebrew:* > > > > /usr/local/lib/pango/1.4.0/modules/pango-tibetan-fc.so > > > > TibetanScriptEngineFc PangoEngineShape PangoRenderFc tibetan:* > > > > > > > > > > > > Then I ran /media/cdrom/installer --log again, but I get the same > > > > error. > > > > > > > > So then I went back to Yast2 and checked on Pango. Yast2 says Pango > > > > is installed properly. > > > > > > > > What should I check next? > > > > > > > > Regards, > > > > Daniel
