On Jan 7, 2006, at 1:03 PM, Marc wrote:
LED1 0 6 <No valid value attribute found>
The spice netlister thinks this is an inductor, because its refdes
begins with L. Use D for a diode (but then you'd need a model). Or
you could substitute a 200 ohm resistor for sim purposes.
GND 0 <No valid value attribute found>
Not sure what you did here. I use the symbol gnd-1 from the power
library and don't see this.
L1 2 1 <No valid value attribute
Another inductor without a value.
U2 ERROR_INVALID_PIN 0 7 0 ERROR_INVALID_PIN <No valid value
attribute found>
U indicates a distributed RC line to SPICE. For complex subcircuits
you need X (and a subcircuit file to simulate whatever it does!).
U1 1 0 3 <No valid value attribute found>
Ditto.
ok im back down to 16 errors i ran a sim and it gave these errors
any ideas pls
Marc :)
John Doty Noqsi Aerospace, Ltd.
[EMAIL PROTECTED]
