My mistake. I forgot about the passive pintype.
Thanks. (* jcl *) On 1/10/06, John Doty <[EMAIL PROTECTED]> wrote: > > On Jan 10, 2006, at 12:04 PM, John Luciani wrote: > > > Since the terminals of passive components (resistors, capacitors, > > inductors) > > are connected to power pins, input pins and output pins you should > > set the > > pintype to input. > > Not "input", "passive". A node that's all inputs is an error, but a > node that's all passives is perfectly reasonable and common. > > I also note that drc2-type checking is mostly useful for pure digital > circuits: for others it's poor at catching errors and often whines > about things that are OK. > > > > > (* jcl *) > > > > On 1/10/06, Marc <[EMAIL PROTECTED]> wrote: > >> what do i add for things like footprint and pintype for capacitors & > >> resistors would it be pwr --/\/\/\/-- pwr or in --/\/\/\/-- out > >> > >> Checking: /usr/share/gEDA/sym/analog/resistor-2.sym > >> Warning: Missing pinlabel= attribute > >> Warning: Missing pintype= attribute > >> Warning: Missing pinlabel= attribute > >> Warning: Missing pintype= attribute > >> Warning: Missing footprint= attribute > >> Warning: Did not find numslots= attribute, not checking slotting > >> 6 warnings found > >> No errors found > >> > >> Also as im doing this should i post the symbols to someone as > >> working ? > >> > >> Marc :) > >> > > > > > > -- > > http://www.luciani.org > > > > John Doty Noqsi Aerospace, Ltd. > [EMAIL PROTECTED] > > > -- http://www.luciani.org
