I have exactly the same problem here. I open the .ps with sketch, but first I convert ir to .sk with pstoedit (pstoedit -f sk file.ps file.sk) and inside sketch, I save it as a postscript file, and the print become perfect.
Em Sex 17 Fev 2006 16:59, Richard Rasker escreveu: > On fri, 17-02-2006 at 12:13 -0500, DJ Delorie wrote: > > Could you send us your .pcb file so we can test it? It would be > > better to just fix pcb so that it worked, than to rely on workarounds. > > Hmm, I'd say the actual layout file is irrelevant, since any PS output > made with my PCB version 1.99q exhibits the same problems. > > The Mirror image problem seems to be that PCB ignores any change in this > setting after the first or second time it's used. > > Attached you'll find the following files: > > display_c1.pcb the PCB layout file > display_c1.pcb.output_back.ps the solder layer PS print > display_c1.pcb.m.output_back.ps the same print, now with Mirror option > > So far, no mirror problem ... but: > > display_c1.pcb.2.output.back.ps the same print, *without* Mirror option > > Apart from the creation date, the last two files are identical, and the > Mirror option is ignored for any subsequent Print command, until PCB is > restarted. > > > And last but not least, there's the file display_pcb_PS_scanned.png, > showing what my Epson EPL5700 laser printer produces when printing the > PS files (e.g. by issuing the lpr [name].ps command). The faulty, > straight line endings are clearly visible, especially with the thicker > traces. On-screen, the PS file looks fine, though. > > If the attachments don't come through, please let me know; I could put > these files up at a web page then. > > Thanks already, regards, > > Richard
