I've gone through that config.php file with a fine-tooth comb.. Either I'm
blind or stupid, neither of which are especially appealing prospects. ;)
I'm attaching a slightly edited (for security reasons) config.php file and
if anyone could point to me what I've got wrong, it would be greatly
appreciated.
From: Vincent Furia <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: Re: [geeklog-users] Installation problem
Reply-To: [EMAIL PROTECTED]
This error usually occurs when a string (usually one or more lines up >from
the line number displayed) isn't properly enclosed in quotes (it >either is
missing a quote, has an extra one, or has miss matched >quotes).
Look for such a problem. If you can't find it you can always attach
you're config.php to an email (after replacing passwords, etc) and we >can
take a look at it for you.
You should never have to change anything in lib-database.php.
-Vinny
_________________________________________________________________
Tired of spam? Get advanced junk mail protection with MSN 8.
http://join.msn.com/?page=features/junkmail
<?php
/* Reminder: always indent with 4 spaces (no tabs). */
//
+---------------------------------------------------------------------------+
// | Geeklog 1.3
|
//
+---------------------------------------------------------------------------+
// | config.php
|
// | Geeklog configuration file.
|
// |
|
//
+---------------------------------------------------------------------------+
// | Copyright (C) 2001 by the following authors:
|
// |
|
// | Authors: Tony Bibbs - [EMAIL PROTECTED]
|
//
+---------------------------------------------------------------------------+
// |
|
// | This program is free software; you can redistribute it and/or
|
// | modify it under the terms of the GNU General Public License
|
// | as published by the Free Software Foundation; either version 2
|
// | of the License, or (at your option) any later version.
|
// |
|
// | This program is distributed in the hope that it will be useful,
|
// | but WITHOUT ANY WARRANTY; without even the implied warranty of
|
// | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
// | GNU General Public License for more details.
|
// |
|
// | You should have received a copy of the GNU General Public License
|
// | along with this program; if not, write to the Free Software Foundation,
|
// | Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
// |
|
//
+---------------------------------------------------------------------------+
// | See the docs/install.html and docs/config.html files for more
information |
// | on configuration
|
//
+---------------------------------------------------------------------------+
//
// $Id: config.php,v 1.69 2003/01/13 13:21:29 dhaun Exp $
// To get Geeklog up and running, you need to make sure the settings in the
// following sections are correct:
// + DATABASE SETTINGS
// + SERVER SETTINGS
// + SITE SETTINGS
// You can adjust the other settings once your site is up and running.
//
+---------------------------------------------------------------------------+
// | DATABASE SETTINGS
|
// |
|
// | These settings tell Geeklog about your database and how to connect to
it. |
//
+---------------------------------------------------------------------------+
$_DB_dbms = 'mysql'; // Do not change (currently, only MySQL
is supported)
$_DB_host = 'localhost';
$_DB_name = '-----'; // Yes, your DB must exist before running
the installer!
$_DB_user = '------';
$_DB_pass = '-------';
$_DB_table_prefix = 'gl_'; // e.g. 'gl_'
// optional settings for making database backups from within Geeklog
$_DB_mysqldump_path = '/usr/bin/mysqldump'; // path to mysqldump binary e.g.
/usr/bin/mysqldump
$_CONF['allow_mysqldump'] = 1; // 1 = on, 0 = off
//
+---------------------------------------------------------------------------+
// | SERVER SETTINGS
|
// |
|
// | All paths must have a trailing slash ('/'). If you're on Windows, they
|
// | must also start with a drive letter (e.g. 'C:/').
|
// | The 'path' value signifies where the config.php (this file) resides
|
//
+---------------------------------------------------------------------------+
$_CONF['path'] = 'D:/webpage/'; // C:/inetpub/wwwroot/geeklog/
// You only need to change this if you moved or renamed the public_html
// directory. In that case, you should specify the complete path to the
// directory like this (i.e. without the $_CONF['path']):
// $_CONF['path_html'] = '/path/to/your/public_html/';
$_CONF['path_html'] = $_CONF['path'] . 'public_html/';
// you shouldn't need to edit the following
$_CONF['path_system'] = $_CONF['path'] . 'system/';
$_CONF['path_log'] = $_CONF['path'] . 'logs/';
$_CONF['path_language'] = $_CONF['path'] . 'language/';
$_CONF['rdf_file'] = $_CONF['path_html'] . 'backend/geeklog.rdf';
$_CONF['backup_path'] = $_CONF['path'] . 'backups/';
//
+---------------------------------------------------------------------------+
// | SITE SETTINGS
|
// |
|
// | These settings help define your Geeklog site.
|
//
+---------------------------------------------------------------------------+
// make sure this is the correct URL to your site (no trailing slash)
$_CONF['site_url'] = 'http://-----------.---';
$_CONF['site_name'] = '----';
$_CONF['site_slogan'] = '------';
$_CONF['site_mail'] = '-----';
$_CONF['theme'] = 'XSilver'; // default theme
// Some hosting services have a preconfigured admin directory. In that case,
// you need to rename Geeklog's admin directory to something like "myadmin"
// and change the following URL as well. Leave as is until you experience
any
// problems accessing Geeklog's admin menu.
$_CONF['site_admin_url'] = $_CONF['site_url'] . '/admin';
// you shouldn't need to edit the following
$_CONF['layout_url'] = $_CONF['site_url'] . '/layout/' .
$_CONF['theme'];
$_CONF['path_themes'] = $_CONF['path_html'] . 'layout/';
$_CONF['path_layout'] = $_CONF['path_themes'] . $_CONF['theme'] .'/';
// optional settings
$_CONF['allow_user_themes'] = 1;
$_CONF['allow_user_language'] = 1;
$_CONF['allow_user_photo'] = 1; // 1 = on, 0 = off...flag that allows
users to upload self-photo
//
****************************************************************************
// * If you set up Geeklog for the first time, you shouldn't need to change
*
// * anything below this line. Come back here once the site is up and
running.*
//
****************************************************************************
//
+---------------------------------------------------------------------------+
// | LOCALE SETTINGS
|
//
+---------------------------------------------------------------------------+
$_CONF['language'] = 'english';
$_CONF['locale'] = 'en-gb';
$_CONF['date'] = '%A, %B %d %Y @ %I:%M %p %Z';
$_CONF['daytime'] = '%m/%d %I:%M%p';
$_CONF['shortdate'] = '%x';
$_CONF['dateonly'] = '%d-%b';
$_CONF['timeonly'] = '%I:%M %p %Z';
$_CONF['default_charset'] = 'iso-8859-1';
//
----------------------------------------------------------------------------+
// | SITE STATUS
|
// |
|
// | To disable your Geeklog site quickly, simply set this flag to false
|
//
+---------------------------------------------------------------------------+
$_CONF['site_enabled'] = true; // true or false
// Message shown when site is down
// When this starts with 'http:' visitors are redirected to that URL
$_CONF['site_disabled_msg'] = 'Geeklog Site is down. Please come back
soon.';
//
+---------------------------------------------------------------------------+
// | SESSION SETTINGS
|
// |
|
// | cookie_ip will store md5(remoteip + randomnum) as the session ID in the
|
// | cookie. This is more secure but will more than likely require dialed up
|
// | users to login each and every time. If ipbasedsessid is turned off
|
// | (which it is by default) it will just store a random number as the
|
// | session ID in the cookie.
|
// |
|
// | default_perm_cookie_timeout is how long you want the permanent cookie
|
// | to persist for. This can be overridden by the user in their user prefs
|
// | if they want. If you don't want to allow permanent cookies set the
|
// | value to an empty string ''.
|
// |
|
// | session_cookie_time is how long you want the session cookie to persist
|
// | for. Only really useful in scenarios where you don't want to allow
|
// | permanent cookies
|
//
+---------------------------------------------------------------------------+
$_CONF['cookie_session'] = 'gl_session';
$_CONF['cookie_name'] = 'geeklog';
$_CONF['cookie_password'] = 'password';
$_CONF['cookie_theme'] = 'theme';
$_CONF['cookie_language'] = 'language';
$_CONF['cookie_lastvisit'] = 'LastVisit';
$_CONF['cookie_lastvisittemp'] = 'LastVisitTemp';
$_CONF['cookie_ip'] = 0;
$_CONF['default_perm_cookie_timeout'] = 604800;
$_CONF['session_cookie_timeout'] = 7200;
$_CONF['cookie_path'] = '/';
$_CONF['cookiedomain'] = '';
$_CONF['cookiesecure'] = 0;
//
+---------------------------------------------------------------------------+
// | This is really redundant but I am including this as a reminder that
those |
// | people writing Geeklog Plug-ins that are OS dependent should check
either |
// | the $_CONF variable below or PHP_OS directly. If you are writing an
|
// | addon that is OS specific your addon should check the system is using
the |
// | right OS. If not, be sure to show a friendly message that says their
GL |
// | distro isn't running the right OS. Do not modify this value
|
//
+---------------------------------------------------------------------------+
$_CONF['ostype'] = PHP_OS;
//
+---------------------------------------------------------------------------+
// | MISCELLANEOUS SETTINGS
|
// |
|
// | These are other various Geeklog settings. The defaults should work OK
|
// | for most situations.
|
//
+---------------------------------------------------------------------------+
// this lets you select which functions are available for registered users
only
$_CONF['loginrequired'] = 0; // all of them, if set to 1 will override all
else
$_CONF['submitloginrequired'] = 0;
$_CONF['commentsloginrequired'] = 0;
$_CONF['linksloginrequired'] = 0;
$_CONF['pollsloginrequired'] = 0;
$_CONF['calendarloginrequired'] = 0;
$_CONF['statsloginrequired'] = 0;
$_CONF['searchloginrequired'] = 0;
$_CONF['profileloginrequired'] = 0;
$_CONF['emailuserloginrequired'] = 0;
$_CONF['emailstoryloginrequired'] = 0;
// Submission Settings
// enable (set to 1) or disable (set to 0) submission queues:
$_CONF['storysubmission'] = 1;
$_CONF['linksubmission'] = 1;
$_CONF['eventsubmission'] = 1;
$_CONF['usersubmission'] = 0;
// Send an email notification when a new submission has been made. The
contents
// of the array can be any combination of 'story', 'link', 'event', and
'user'.
// Example: $_CONF['notification'] = array ('story', 'link', 'event');
// The email will be sent to $_CONF['site_mail'] (see above).
$_CONF['notification'] = array ();
$_CONF['postmode'] = 'plaintext'; // can be 'plaintext' or 'html'
$_CONF['speedlimit'] = 45; // in seconds
$_CONF['skip_preview'] = 0; // If = 1, allow user to submit comments and
stories without previewing
// Topic Settings
// Topics can be assigned a sort number so that you can control what order
they
// appear in the 'Sections' block on the homepage. If you prefer you can
also
// have this sort alphabetically by changing the value to 'alpha' (default
is
// by 'sortnum'
$_CONF['sortmethod'] = 'sortnum'; // or 'alpha'
// Show the number of stories in a topic in Section Block
$_CONF['showstorycount'] = 1;
// Show the number of story submissions for a topic in Section Block
$_CONF['showsubmissioncount'] = 1;
// Show blocks for empty search results
$_CONF['showemptysearchresults'] = 0;
// How long an anonymous (guest) user session is good for
$_CONF['whosonline_threshold'] = 300; // in seconds
// "Daily Digest" settings
// Let users get stories emailed to them
// Requires cron and the use of php as a shell script
$_CONF['emailstories'] = 0;
// Specify length of stories in those emails:
// 0 = send only title + link, 1 = send entire introtext,
// any other number = max. number of characters per story
$_CONF['emailstorieslength'] = 1;
// New users get stories emailed to them per default (= 1) or not (= 0)
$_CONF['emailstoriesperdefault'] = 0;
// When user submission is activated, allow users from these domains to
// register without having to go through the submission queue.
$_CONF['allow_domains'] = ''; // e.g. 'mycompany.com,myothercompany.com'
// Following times are in seconds
$_CONF['newstoriesinterval'] = 86400;
$_CONF['newcommentsinterval'] = 172800;
$_CONF['newlinksinterval'] = 1209600;
// Set to 1 to hide a section from the What's New block:
$_CONF['hidenewstories'] = 0;
$_CONF['hidenewcomments'] = 0;
$_CONF['hidenewlinks'] = 0;
// Calendar Settings
$_CONF['personalcalendars'] = 1;
$_CONF['showupcomingevents'] = 1;
$_CONF['upcomingeventsrange'] = 14; // days
$_CONF['event_types'] =
'Anniversary,Appointment,Birthday,Business,Education,Holiday,Meeting,Miscellaneous,Personal,Phone
Call,Special Occasion,Travel,Vacation';
// Story Settings
$_CONF['maximagesperarticle'] = 5;
$_CONF['backend'] = 1;
$_CONF['limitnews'] = 10;
$_CONF['minnews'] = 1; // minimum number of stories per page
$_CONF['contributedbyline'] = 1; // If 1, show contributed by line
$_CONF['article_image_align'] = 'right'; // Options are left or right.
$_CONF['hideemailicon'] = 0; // If 1, hide "email story" option
$_CONF['hideprintericon'] = 0; // If 1, hide "printer friendly"
option
// When set to 1, this will render the first story on any page using the
// templates for featured stories - even if that story is not featured.
$_CONF['showfirstasfeatured'] = 0;
// Uncomment the following line to set the copyright year in the site's
footer
// to a specific year. Otherwise, the current year will be used.
// $_CONF['copyrightyear'] = 2003;
// Optional Image Settings
// If you set $_CONF['image_lib'] below, you must supply a path for the
library
// you will use. Setting this also assumes that if a photo is uploaded that
is
// too big either by the image sizes below or by overriding them using the
// upload object then the library you choose will attempt to resize the
image.
// Leaving this value empty disables this feature
$_CONF['image_lib'] = ''; // can be netpbm, imagemagick
// If you set image_lib to imagemagick give this path otherwise comment it
out
// NOTE: you will need a fairly recent version of ImageMagick for this to
work.
// ImageMagick version 5.4.9 (or newer) is recommended.
//$_CONF['path_to_mogrify'] = '/path/to/mogrify';
// If you set image_lib to netpbm give the path to the netpbm directory, you
// need the trailing slash here.
// NOTE: if you use NETPBM, use the latest package from the Gallery package
for
// your operating system found at http://sourceforge.net/projects/gallery in
// the download section. You need to take the netpbm tarball from them and
// uncompress the file which will create a netpbm directory. If you plan to
// only use netpbm with Geeklog, put that entire folder in /path/to/geeklog
and
// adjust the path below. The only programs you need from netpbm are
giftopnm,
// jpegtopnm, pngtopnm, ppmtogif, ppmtojpeg, pnmtopng and pnmscale
//$_CONF['path_to_netpbm'] = '/path/to/netpbm/';
// Story image settings
$_CONF['max_image_width'] = 300; // In pixels
$_CONF['max_image_height'] = 300; // In pixels
$_CONF['max_image_size'] = 1048576; // 1048576 = 1MB
// User photo settings
$_CONF['max_photo_width'] = 96; // In pixels
$_CONF['max_photo_height'] = 96; // In pixels
$_CONF['max_photo_size'] = 65536; // 65536 = 64KB
// Comment Settings
$_CONF['commentspeedlimit'] = 45;
$_CONF['comment_limit'] = 100; // Default Number of Comments
under Story
$_CONF['comment_mode'] = 'threaded'; // Default Comment Mode; from
'threaded','nested','nocomments',and 'flat'
// Allow / disallow comments to stories by default (can be changed
individually for every story)
$_CONF['comment_code'] = 0; // 0 = comments enabled, -1 = disabled
// Poll Settings
$_CONF['maxanswers'] = 10;
// 'submitorder' is order answers are saved in admin/poll.php
// 'voteorder' will list answers in order of number of votes
(highest->lowest);
$_CONF['answerorder'] = 'submitorder';
$_CONF['pollcookietime'] = 86400;
$_CONF['polladdresstime'] = 604800;
// Links Settings
// You can set both of the following to 0 to get back the old (pre-1.3.6)
// style of the links section. Setting only linkcols to 0 will hide the
// categories but keep the paging. Setting only linksperpage to 0 will list
// all the links of the selected category on one page.
$_CONF['linkcols'] = 3; // categories per column
$_CONF['linksperpage'] = 10; // links per page
// Parameters for checking words and HTML tags
$_CONF['allowablehtml'] =
'<p>,<b>,<i>,<a>,<em>,<br>,<tt>,<hr>,<li>,<ol>,<ul>,<code>,<pre>';
$_CONF['adminhtml'] = $_CONF['allowablehtml'] . ',
<div>,<table>,<tr>,<td>,<th>';
$_CONF['censormode'] = 1;
$_CONF['censorreplace'] = '*censored*';
$_CONF['censorlist'] =
array('fuck','cunt','fucker','fucking','pussy','cock','c0ck',' cum
','twat','clit','bitch','fuk','fuking','motherfucker');
// Experimental, only works with staticpages right now. This feature is
known
// to have issues that are unresolvable with systems running IIS. Have not
// tested on windows with apache yet. This feature when fully implemented,
// will make your site crawler friendly. Problems with IIS are known PHP
CGI
// bug.
$_CONF['url_rewrite'] = false; // false = off, true = on
// Define a few useful things for GL
if (!defined ('LB')) {
define('LB',"\n");
}
if (!defined ('VERSION')) {
define('VERSION', '1.3.7sr1');
}
$_STATES = array(
'--'=>'',
'AL'=>'Alabama',
'AK'=>'Alaska',
'AZ'=>'Arizona',
'AR'=>'Arkansas',
'CA'=>'California',
'CO'=>'Colorado',
'CT'=>'Connecticut',
'DE'=>'Delaware',
'DC'=>'District of Columbia',
'FL'=>'Florida',
'GA'=>'Georgia',
'HI'=>'Hawaii',
'ID'=>'Idaho',
'IL'=>'Illinois',
'IN'=>'Indiana',
'IA'=>'Iowa',
'KS'=>'Kansas',
'KY'=>'Kentucky',
'LA'=>'Louisiana',
'ME'=>'Maine',
'MD'=>'Maryland',
'MA'=>'Massachusetts',
'MI'=>'Michigan',
'MN'=>'Minnesota',
'MS'=>'Mississippi',
'MO'=>'Missouri',
'MT'=>'Montana',
'NE'=>'Nebraska',
'NV'=>'Nevada',
'NH'=>'New Hampshire',
'NJ'=>'New Jersy',
'NM'=>'New Mexico',
'NY'=>'New York',
'NC'=>'North Carolina',
'ND'=>'North Dakota',
'OH'=>'Ohio',
'OK'=>'Oklahoma',
'OR'=>'Oregon',
'PA'=>'Pennsylvania',
'RI'=>'Rhode Island',
'SC'=>'South Carolina',
'SD'=>'South Dakota',
'TN'=>'Tennessee',
'TX'=>'Texas',
'UT'=>'Utah',
'VT'=>'Vermont',
'VA'=>'Virginia',
'WA'=>'Washington',
'WV'=>'West Viginia',
'WI'=>'Wisconsin',
'WY'=>'Wyoming'
);
?>
