Hello Cyrille,
yes, maybe a second inlet to the gemwin might be what it needs or just
one route message for the gemwin for things that are not related to the
soft edging like
gemwin frame 25
or
gemwin border 1
as far as the bug that I encounter is concerned I discuss them example
by example. But don't take me wrong it works for me already and I'm very
happy about it.
Either I have a hardware specific problem or the order how the
framebuffer is clampt onto the rectangle is kind of messed up as far as
mostly the vertical order is concerned.
In any case in the working 3 1 example I generally see two ways how to
strech and clamp the texture. Aspect ratio preserving for the content.
or such that all the content is shown but a little bit deformed.
horizontal row of screens:
1 1 (unrealistic case)
shading to black happens at the right edge
texture moves to the left with increasing overlap
2 1
shading on the right screen on both edges, left and also wrongly on the
right.
shading on the left screen on the right edge only left edge remains
unshaded as it should
texture on the right screen is stretched symmetrically to left and right
textures on the left screen is streched towards left
3 1 (my case)
works for me!
shading only at the edges that are close to the middle screen
I wonder if the textures have to move on the left and on the right
screen. I guess this is a question of preserving the aspect ratio of the
content of the projection
4 1
like 3 1 but the fourth screen on the right shows vertical stripes as
artifacts, which is the texture content of the leftmost screen on the top.
vertical colums of screens:
1 2
shading happens only at the vertical edges, left right on top, only
right at the bottom. No shading horizontally in the middle.
Content of the screen doe not seem to be properly distributed starts on
the top screen and not in the middle of both.
1 3
content starts in the middle but when I increas the fractal.jpg
it seems to distribute the content as if the geometry is 3 1 rather than 1 3
mixed mode
2 2
rendering of a small fractal.jpg starts at the bottom right.
when increasing, it extents correctly towards the bottom left.
The top left shows part of the texture and the top right is vertical
stripy artifacts
On 3/22/12 1:06 PM, Cyrille Henry wrote:
hello,
Le 22/03/2012 16:56, Florian Grond a écrit :
Hi Cyrille,
Thanks you very much! I tested it and it works for me. However I think
geometries other than 3 1 do not work yet as they should. 2 2 gives
strange results.
what do you mean?
it look like it should imo.
maybe there is a bug so it did not look the same here or on your
computer, or we may did not have the same expectation.
I added some things to the interface, basically exposing some features
of gemwin such as offset or border, or frames per second, they can all
be set through one inlet, am not sure if the message names I created
follow GEM convention I wonder if for a complete functionallity all
gemwin methods should be made acessible to the user. Let me know if
you find usefull, what I added
well, i'm usually not a big fan of gui.
maybe it jus miss an inlet connected to the gemwin ...
Cyrille
Again thank you very much!
Florian
On 3/21/12 5:53 PM, Cyrille Henry wrote:
oups, wrong one.
Le 21/03/2012 22:52, Cyrille Henry a écrit :
oups.
this one should work better.
cheers
cyrille
Le 21/03/2012 22:00, Florian Grond a écrit :
hello cyrille,
the glsl_fragment does not like the new shader if I bang it I get:
compile info log:
ERROR: 0:43: '!=' wrong operand types
ERROR: 0:45: '!=' wrong operand types
ERROR: 0:57: '!=' wrong operand types
ERROR: 0:59: '!=' wrong operand types
there is a type problem between float and constant int
so it says shader not loaded,
Cheers,
Florian
On 3/21/12 4:07 PM, Cyrille Henry wrote:
hello,
it look like a bug in the original shader.
thanks for reporting it.
this shader should work.
could you test it so that i commit it if it's ok.
BTW, the fade control is for both right and left.
so it can be twice what the user expect.
i.e if you want 10 pixel shade on the right, so 10 pixel shade
also on
the left, you have to set overlap to 20.
maybe i should change that.
feedback welcome.
Cheers
Cyrille
Le 21/03/2012 19:30, Florian Grond a écrit :
Here I could reproduce the problem with the example patch, having it
extended over the tripple head projectors.
I basically see the shading again only if I drive the overlap to
extremely many pixels.
I was wondering if this might have something to do with the
texturing
mode rectangle anywhere?
I modified the the [flat_projection] so that I could define an
offset
for the windowcreation.
Thanks for any help,
Best,
Florian
On 3/21/12 1:49 PM, Cyrille Henry wrote:
hello,
would it be possible to see your patch?
that would be easier to help.
Cyrille
Le 21/03/2012 18:15, Florian Grond a écrit :
Hello Jack,
01.flat_projection-help.pd seems to work.
I see either as 4 by 1 or 2 by the fractal image with decreasing
intensity at the edges giving a fade into black.
I looked into the guts of [flat_projection]
and if I send the print message to the glsl_fragemnet and the
glsl_program I get lots of info about user variable uvar#1 to
uvar#4
I'm usin PD extended 0.42.5
I compiled GEM from the sources 0.93.3 (added some handmade
classes)
My GPU NVIDIA GeForce 7300 GT
My screen size is 1280 * 1024
geometry is x 3 y 1
I would like to have an overlap of about 10 - 15 pixels
In my installation I see that I get a fade into black only if I
increase the overlap to very high numbers up to have the size of
my x
dimension. So I conclude the fade into black is just too weak.
How could I change that?
Thanks,
Florian
So I think the GPU model is ok
On 3/20/12 6:51 PM, Jack wrote:
Le 20/03/2012 21:07, Florian Grond a écrit :
Dear List,
I'm currently working on a horizontal 3 screen projection
(tripple
head) and I'm using the multiscreen projection flat projection
abstraction from Cyrille.
The overlap is working nicely but I don't get the it to fade.
i.e. I
see a vertical stripe of overlap with higher intensity.
Any help or pointer where to look for solutions very much
appreciated.
Cheers,
Florian
Hello Florian,
Can you tell us your configuration (Pd, Gem, GPU model) ?
Have you a problem with the example 01.flat_projection-help.pd' ?
++
Jack
_______________________________________________
GEM-dev mailing list
GEM-dev@iem.at
http://lists.puredata.info/listinfo/gem-dev
_______________________________________________
GEM-dev mailing list
GEM-dev@iem.at
http://lists.puredata.info/listinfo/gem-dev
--
--8<-------8<-------- hier abtrennen -----8<--------8<----
F l o r i a n G R O N D
PhD Student at Ambient Intelligence Group,
CITEC Bielefeld University, Germany
Universitaetsstrasse 21 - 23 33615 Bielefeld
Tel.: 0049 521 106 12163
http://cit-ec.org http://grond.at
-->8------->8-------- hier abtrennen ------->8------>8----
_______________________________________________
GEM-dev mailing list
GEM-dev@iem.at
http://lists.puredata.info/listinfo/gem-dev
