Hello Nikos Nikoleris,
I'd like you to do a code review. Please visit
https://gem5-review.googlesource.com/2965
to review the following change.
Change subject: arm: Enable m5ops by default for VExpress_GEM5_V1
......................................................................
arm: Enable m5ops by default for VExpress_GEM5_V1
Allocate 0x10010000-0x1001ffff for m5 pseudo-ops. This range is a part
of the CS5 address range in the RS1/RS2 memory map.
Change-Id: Ica45cd53bc4ebb62966afa099fa465e27fb0452c
Signed-off-by: Andreas Sandberg <[email protected]>
Reviewed-by: Nikos Nikoleris <[email protected]>
---
M src/dev/arm/RealView.py
1 file changed, 6 insertions(+), 0 deletions(-)
diff --git a/src/dev/arm/RealView.py b/src/dev/arm/RealView.py
index 20112d4..a2bac2b 100644
--- a/src/dev/arm/RealView.py
+++ b/src/dev/arm/RealView.py
@@ -817,6 +817,7 @@
0x0c000000-0x0fffffff: Reserved (Off-chip, CS4)
0x10000000-0x13ffffff: gem5-specific peripherals (Off-chip, CS5)
0x10000000-0x1000ffff: gem5 energy controller
+ 0x10010000-0x1001ffff: gem5 pseudo-ops
0x14000000-0x17ffffff: Reserved (Off-chip, PSRAM, CS1)
0x18000000-0x1bffffff: Reserved (Off-chip, Peripherals, CS2)
@@ -956,3 +957,8 @@
cur_sys.atags_addr = 0x8000000
cur_sys.load_addr_mask = 0xfffffff
cur_sys.load_offset = 0x80000000
+
+ # Setup m5ops. It's technically not a part of the boot
+ # loader, but this is the only place we can configure the
+ # system.
+ cur_sys.m5ops_base = 0x10010000
--
To view, visit https://gem5-review.googlesource.com/2965
To unsubscribe, visit https://gem5-review.googlesource.com/settings
Gerrit-Project: public/gem5
Gerrit-Branch: master
Gerrit-MessageType: newchange
Gerrit-Change-Id: Ica45cd53bc4ebb62966afa099fa465e27fb0452c
Gerrit-Change-Number: 2965
Gerrit-PatchSet: 1
Gerrit-Owner: Andreas Sandberg <[email protected]>
Gerrit-Reviewer: Nikos Nikoleris <[email protected]>
_______________________________________________
gem5-dev mailing list
[email protected]
http://m5sim.org/mailman/listinfo/gem5-dev
