Right,

I'm not sure if it does make sense, but I will check it.

Polina

On Sun, Oct 18, 2009 at 2:22 PM, nathan binkert <n...@binkert.org> wrote:

> I believe that the issue was that the checkin "wasn't supposed to
> change stats", yet it did.  It's ok for stat values to change, but we
> only want them to change when we actually change something that should
> affect them.  She was going to verify that it made sense.
>
>  Nate
>
> On Sun, Oct 18, 2009 at 12:09 PM, Beckmann, Brad <brad.beckm...@amd.com>
> wrote:
> > Actually, it looks like a reference miscorrelation error (see below).  It
> > appears this problem has existed since Polina’s checkin on 8/28.  The
> > difference is rather minor, do we want to just go ahead and update the
> > reference?
> >
> >
> >
> > Brad
> >
> >
> >
> > -Exiting @ tick 31749698 because maximum number of loads reached
> >
> > +Exiting @ tick 31693010 because maximum number of loads reached
> >
> >
> >
> > ===== Statistics differences =====
> >
> > Maximum error magnitude: +0.911268%
> >
> >
> >
> >                                   Reference  New Value   Abs Diff   Pct
> Chg
> >
> > Key statistics:
> >
> >
> >
> >   host_mem_usage                    1507496    1522440      14944
> +0.99%
> >
> >   sim_ticks                        31749698   31693010     -56688
> -0.18%
> >
> >
> >
> > Largest 20 relative errors (> 0%):
> >
> >
> >
> >   sim_ticks                        31749698   31693010     -56688
> -0.18%
> >
> >   system.cpu0.num_reads               99565      99568          3
> +0.00%
> >
> >   system.cpu0.num_writes              53743      53636       -107
> -0.20%
> >
> >   system.cpu1.num_reads               99657      99545       -112
> -0.11%
> >
> >   system.cpu1.num_writes              53715      53439       -276
> -0.51%
> >
> >   system.cpu2.num_reads               99204      99287         83
> +0.08%
> >
> >   system.cpu2.num_writes              53874      53468       -406
> -0.75%
> >
> >   system.cpu3.num_writes              53515      53560         45
> +0.08%
> >
> >   system.cpu4.num_reads               99473      99582        109
> +0.11%
> >
> >   system.cpu4.num_writes              53442      53929        487
> +0.91%
> >
> >   system.cpu5.num_reads               99627      99543        -84
> -0.08%
> >
> >   system.cpu5.num_writes              53511      53703        192
> +0.36%
> >
> >   system.cpu6.num_reads               99662      99253       -409
> -0.41%
> >
> >   system.cpu6.num_writes              53565      53497        -68
> -0.13%
> >
> >   system.cpu7.num_reads               99533      99640        107
> +0.11%
> >
> >   system.cpu7.num_writes              53739      53676        -63
> -0.12%
> >
> >
> >
> > ***** build/ALPHA_SE/tests/fast/quick/50.memtest/alpha/linux/memtest-ruby
> > FAILED!
> >
> >
> >
> > scons: done building targets.
> >
> >
> >
> >
> >
> > From: m5-dev-boun...@m5sim.org [mailto:m5-dev-boun...@m5sim.org] On
> Behalf
> > Of Polina Dudnik
> > Sent: Sunday, October 18, 2009 11:10 AM
> > To: M5 Developer List
> > Subject: Re: [m5-dev] Cron
> > <m5t...@zizzer>/z/m5/regression/do-regression--scratch all
> >
> >
> >
> > Thanks Brad,
> >
> > Nate, let's see if it works after this check-in, and I will fix it if it
> > doesn't.
> >
> > Polina
> >
> > On Sun, Oct 18, 2009 at 1:07 PM, Beckmann, Brad <brad.beckm...@amd.com>
> > wrote:
> >
> > I might be able to help with this, but I'm not sure exactly what the
> > problem is.  It might be caused by a reference to the "libruby_file"
> > variable in ruby_se.py.  I can't (or don't know how to) access
> > /z/m5/regression/regress-2009-10-18-03:00:01 to confirm, but
> > memtest-ruby is working for me with this small fix.
> >
> > I'll check it in.
> >
> > Brad
> >
> > -----Original Message-----
> > From: m5-dev-boun...@m5sim.org [mailto:m5-dev-boun...@m5sim.org] On
> > Behalf Of nathan binkert
> > Sent: Sunday, October 18, 2009 8:30 AM
> > To: M5 Developer List
> > Subject: Re: [m5-dev] Cron <m5t...@zizzer>
> > /z/m5/regression/do-regression--scratch all
> >
> > Polina or Derek.  Can one of you *please* take a look at what happened
> > with this regression and fix it?  It really won't take that long.
> >
> >  Nate
> >
> > On Sun, Oct 18, 2009 at 4:44 AM, Cron Daemon
> > <r...@zizzer.eecs.umich.edu> wrote:
> >> *****
> > build/ALPHA_SE/tests/fast/quick/00.hello/alpha/linux/simple-atomic-ruby
> > passed.
> >> *****
> > build/ALPHA_SE/tests/fast/long/50.vortex/alpha/tru64/simple-timing
> > passed.
> >> *****
> > build/ALPHA_SE/tests/fast/long/70.twolf/alpha/tru64/simple-timing
> > passed.
> >> *****
> > build/ALPHA_SE/tests/fast/quick/20.eio-short/alpha/eio/simple-atomic
> > passed.
> >> *****
> > build/ALPHA_SE/tests/fast/quick/00.hello/alpha/linux/simple-timing
> > passed.
> >> ***** build/ALPHA_SE/tests/fast/long/00.gzip/alpha/tru64/simple-atomic
> > passed.
> >> *****
> > build/ALPHA_SE/tests/fast/quick/00.hello/alpha/tru64/simple-atomic-ruby
> > passed.
> >> *****
> > build/ALPHA_SE/tests/fast/quick/00.hello/alpha/linux/simple-atomic
> > passed.
> >> *****
> > build/ALPHA_SE/tests/fast/quick/00.hello/alpha/tru64/simple-timing-ruby
> > passed.
> >> ***** build/ALPHA_SE/tests/fast/long/30.eon/alpha/tru64/simple-atomic
> > passed.
> >> *****
> > build/ALPHA_SE/tests/fast/quick/00.hello/alpha/linux/simple-timing-ruby
> > passed.
> >> *****
> > build/ALPHA_SE/tests/fast/long/70.twolf/alpha/tru64/simple-atomic
> > passed.
> >> *****
> > build/ALPHA_SE/tests/fast/long/50.vortex/alpha/tru64/simple-atomic
> > passed.
> >> *****
> > build/ALPHA_SE/tests/fast/quick/30.eio-mp/alpha/eio/simple-timing-mp
> > passed.
> >> ***** build/ALPHA_SE/tests/fast/long/00.gzip/alpha/tru64/simple-timing
> > passed.
> >> *****
> > build/ALPHA_SE/tests/fast/quick/01.hello-2T-smt/alpha/linux/o3-timing
> > passed.
> >> *****
> > build/ALPHA_SE/tests/fast/quick/00.hello/alpha/tru64/simple-atomic
> > passed.
> >> ***** build/ALPHA_SE/tests/fast/quick/00.hello/alpha/linux/o3-timing
> > passed.
> >> *****
> > build/ALPHA_SE/tests/fast/quick/20.eio-short/alpha/eio/simple-timing
> > passed.
> >> ***** build/ALPHA_SE/tests/fast/quick/50.memtest/alpha/linux/memtest
> > passed.
> >> *****
> > build/ALPHA_SE/tests/fast/long/60.bzip2/alpha/tru64/simple-atomic
> > passed.
> >> *****
> > build/ALPHA_SE/tests/fast/quick/00.hello/alpha/linux/inorder-timing
> > passed.
> >> ***** build/ALPHA_SE/tests/fast/quick/00.hello/alpha/tru64/o3-timing
> > passed.
> >> ***** build/ALPHA_SE/tests/fast/long/70.twolf/alpha/tru64/o3-timing
> > passed.
> >> *****
> > build/ALPHA_SE/tests/fast/long/40.perlbmk/alpha/tru64/simple-atomic
> > passed.
> >> ***** build/ALPHA_SE/tests/fast/long/50.vortex/alpha/tru64/o3-timing
> > passed.
> >> *****
> > build/ALPHA_SE/tests/fast/long/60.bzip2/alpha/tru64/simple-timing
> > passed.
> >> *****
> > build/ALPHA_SE/tests/fast/long/40.perlbmk/alpha/tru64/simple-timing
> > passed.
> >> *****
> > build/ALPHA_SE/tests/fast/quick/30.eio-mp/alpha/eio/simple-atomic-mp
> > passed.
> >> *****
> > build/ALPHA_SE/tests/fast/quick/00.hello/alpha/tru64/simple-timing
> > passed.
> >> ***** build/ALPHA_SE/tests/fast/long/30.eon/alpha/tru64/simple-timing
> > passed.
> >> *****
> > build/ALPHA_SE/tests/fast/quick/50.memtest/alpha/linux/memtest-ruby
> > FAILED!
> >> *****
> > build/ALPHA_FS/tests/fast/long/10.linux-boot/alpha/linux/tsunami-o3
> > passed.
> >> *****
> > build/ALPHA_SE/tests/fast/long/50.vortex/alpha/tru64/inorder-timing
> > passed.
> >> *****
> > build/ALPHA_FS/tests/fast/quick/10.linux-boot/alpha/linux/tsunami-simple
> > -atomic passed.
> >> *****
> > build/ALPHA_SE/tests/fast/long/70.twolf/alpha/tru64/inorder-timing
> > passed.
> >> *****
> > build/ALPHA_FS/tests/fast/quick/10.linux-boot/alpha/linux/tsunami-simple
> > -atomic-dual passed.
> >> *****
> > build/ALPHA_FS/tests/fast/quick/10.linux-boot/alpha/linux/tsunami-simple
> > -timing passed.
> >> *****
> > build/ALPHA_FS/tests/fast/quick/10.linux-boot/alpha/linux/tsunami-simple
> > -timing-dual passed.
> >> *****
> > build/ALPHA_FS/tests/fast/quick/80.netperf-stream/alpha/linux/twosys-tsu
> > nami-simple-atomic passed.
> >> *****
> > build/ALPHA_FS/tests/fast/long/10.linux-boot/alpha/linux/tsunami-o3-dual
> > passed.
> >> ***** build/MIPS_SE/tests/fast/quick/00.hello/mips/linux/simple-atomic
> > passed.
> >> *****
> > build/MIPS_SE/tests/fast/quick/00.hello/mips/linux/inorder-timing
> > passed.
> >> *****
> > build/MIPS_SE/tests/fast/quick/00.hello/mips/linux/simple-atomic-ruby
> > passed.
> >> ***** build/MIPS_SE/tests/fast/quick/00.hello/mips/linux/o3-timing
> > passed.
> >> ***** build/MIPS_SE/tests/fast/quick/00.hello/mips/linux/simple-timing
> > passed.
> >> *****
> > build/MIPS_SE/tests/fast/quick/00.hello/mips/linux/simple-timing-ruby
> > passed.
> >> ***** build/ALPHA_SE/tests/fast/long/30.eon/alpha/tru64/o3-timing
> > passed.
> >> ***** build/ALPHA_SE/tests/fast/long/00.gzip/alpha/tru64/o3-timing
> > passed.
> >> *****
> > build/SPARC_SE/tests/fast/quick/02.insttest/sparc/linux/simple-atomic
> > passed.
> >> *****
> > build/SPARC_SE/tests/fast/quick/02.insttest/sparc/linux/o3-timing
> > passed.
> >> *****
> > build/SPARC_SE/tests/fast/quick/40.m5threads-test-atomic/sparc/linux/sim
> > ple-atomic-mp-ruby passed.
> >> *****
> > build/SPARC_SE/tests/fast/quick/40.m5threads-test-atomic/sparc/linux/o3-
> > timing-mp passed.
> >> *****
> > build/SPARC_SE/tests/fast/long/50.vortex/sparc/linux/simple-atomic
> > passed.
> >> *****
> > build/SPARC_SE/tests/fast/quick/00.hello/sparc/linux/simple-atomic-ruby
> > passed.
> >> *****
> > build/SPARC_SE/tests/fast/quick/02.insttest/sparc/linux/simple-timing
> > passed.
> >> *****
> > build/SPARC_SE/tests/fast/quick/00.hello/sparc/linux/simple-atomic
> > passed.
> >> *****
> > build/SPARC_SE/tests/fast/quick/40.m5threads-test-atomic/sparc/linux/sim
> > ple-timing-mp passed.
> >> *****
> > build/SPARC_SE/tests/fast/quick/00.hello/sparc/linux/simple-timing
> > passed.
> >> *****
> > build/SPARC_SE/tests/fast/quick/00.hello/sparc/linux/simple-timing-ruby
> > passed.
> >> ***** build/SPARC_SE/tests/fast/long/10.mcf/sparc/linux/simple-atomic
> > passed.
> >> *****
> > build/SPARC_SE/tests/fast/quick/40.m5threads-test-atomic/sparc/linux/sim
> > ple-atomic-mp passed.
> >> *****
> > build/SPARC_SE/tests/fast/long/70.twolf/sparc/linux/simple-timing
> > passed.
> >> *****
> > build/SPARC_SE/tests/fast/long/70.twolf/sparc/linux/simple-atomic
> > passed.
> >> *****
> > build/SPARC_SE/tests/fast/long/50.vortex/sparc/linux/simple-timing
> > passed.
> >> ***** build/SPARC_SE/tests/fast/long/10.mcf/sparc/linux/simple-timing
> > passed.
> >> ***** build/SPARC_SE/tests/fast/long/00.gzip/sparc/linux/simple-atomic
> > passed.
> >> ***** build/SPARC_SE/tests/fast/long/00.gzip/sparc/linux/simple-timing
> > passed.
> >> ***** build/X86_SE/tests/fast/quick/00.hello/x86/linux/simple-atomic
> > passed.
> >> ***** build/X86_SE/tests/fast/quick/00.hello/x86/linux/simple-timing
> > passed.
> >> *****
> > build/X86_SE/tests/fast/quick/00.hello/x86/linux/simple-timing-ruby
> > passed.
> >> *****
> > build/SPARC_FS/tests/fast/long/80.solaris-boot/sparc/solaris/t1000-simpl
> > e-atomic passed.
> >> ***** build/X86_SE/tests/fast/long/10.mcf/x86/linux/simple-timing
> > passed.
> >> ***** build/X86_SE/tests/fast/long/70.twolf/x86/linux/simple-atomic
> > passed.
> >> ***** build/X86_SE/tests/fast/long/20.parser/x86/linux/simple-atomic
> > passed.
> >> ***** build/X86_SE/tests/fast/long/20.parser/x86/linux/simple-timing
> > passed.
> >> ***** build/X86_SE/tests/fast/long/00.gzip/x86/linux/simple-atomic
> > passed.
> >> *****
> > build/X86_SE/tests/fast/quick/00.hello/x86/linux/simple-atomic-ruby
> > passed.
> >> ***** build/X86_SE/tests/fast/long/00.gzip/x86/linux/simple-timing
> > passed.
> >> ***** build/X86_SE/tests/fast/long/70.twolf/x86/linux/simple-timing
> > passed.
> >> ***** build/X86_SE/tests/fast/long/10.mcf/x86/linux/simple-atomic
> > passed.
> >> ***** build/ARM_SE/tests/fast/quick/00.hello/arm/linux/simple-atomic
> > passed.
> >> ***** build/X86_SE/tests/fast/long/60.bzip2/x86/linux/simple-atomic
> > passed.
> >> ***** build/X86_SE/tests/fast/long/60.bzip2/x86/linux/simple-timing
> > passed.
> >> ***** build/ALPHA_SE/tests/fast/long/40.perlbmk/alpha/tru64/o3-timing
> > passed.
> >> ***** build/ALPHA_SE/tests/fast/long/60.bzip2/alpha/tru64/o3-timing
> > passed.
> >> ***** build/SPARC_SE/tests/fast/long/00.gzip/sparc/linux/o3-timing
> > passed.
> >>
> >> See /z/m5/regression/regress-2009-10-18-03:00:01 for details.
> >>
> >> _______________________________________________
> >> m5-dev mailing list
> >> m5-dev@m5sim.org
> >> http://m5sim.org/mailman/listinfo/m5-dev
> >>
> >>
> > _______________________________________________
> > m5-dev mailing list
> > m5-dev@m5sim.org
> > http://m5sim.org/mailman/listinfo/m5-dev
> >
> >
> > _______________________________________________
> > m5-dev mailing list
> > m5-dev@m5sim.org
> > http://m5sim.org/mailman/listinfo/m5-dev
> >
> >
> >
> > _______________________________________________
> > m5-dev mailing list
> > m5-dev@m5sim.org
> > http://m5sim.org/mailman/listinfo/m5-dev
> >
> >
> _______________________________________________
> m5-dev mailing list
> m5-dev@m5sim.org
> http://m5sim.org/mailman/listinfo/m5-dev
>
_______________________________________________
m5-dev mailing list
m5-dev@m5sim.org
http://m5sim.org/mailman/listinfo/m5-dev

Reply via email to