You need to open another terminal and run the m5term application in there. The terminal that gem5 is running is just displaying warnings and other such information. Ali
On Jul 23, 2011, at 2:27 AM, Kun Lu wrote: > To the question: > Do you see any output from the simulator telling you it's expecting a > terminal to connect at port 3456? > > No, actually I see no response to whatever command I typed after issuing > 'build/ARM_FS/m5.opt configs/examples/fs.py'. > For example, 'cd util/term', 'make' returns nothing. So I am not sure if they > are really executed. > > Maybe Gem5 can provide some video demos as how to install and use some > variants of the simulator? > It would be extremely helpful for the users. > > Thanks! > > Kun > > On Fri, Jul 22, 2011 at 12:36 PM, Gabe Black <[email protected]> wrote: > On 07/22/11 01:47, Kun Lu wrote: >> Goodday: >> I am still trying to solve the issue of booting linux in FS mode. Here is >> what I did: >> >> compiled with ARM-FS and m5-opt on my Fedora-11 ===> >> All OK >> downloaded the arm-linux disk image from Ali's link >> ===> All OK >> run it with command 'build/ARM_FS/m5.opt configs/example/fs.py', ===> >> Received strange outputs (See below) >> (while fs.py running) cd util/term and make >> ===> All OK >> ./m5term localhost 3456 >> ===> No terminal coming up; stalls there forever >> So, does someone has experience as to how to fix this? >> Thank you! >> Kun >> >> Strange outputs when I did step 3: >> ... >> 0: system.remote_gdb.listener: listening for remote gdb #0 on port 7000 >> **** REAL SIMULATION**** >> info: Entering event queue @ 0. Starting simulation... >> warn: The clidr register always reports 0 caches. >> warn: The csselr register isn't implemented. >> warn: The ccsidr register isn't implemented and always reads as 0. >> warn: instruction 'mcr bpiall' unimplemented >> warn: instruction 'mcr dccimvac' unimplemented >> warn: instruction 'mcr dccmvau' unimplemented >> warn: instruction 'mcr icimvau' unimplemented >> warn: LCD dual screen mode not supported >> warn: instruction 'mcr bpiall' unimplemented >> warn: Returning thumbEE disabled for now since we don't support >> CP14config registers and jumping to ThumbEE vector >> warn: instruction 'mcr bpiall' unimplemented >> >> >> _______________________________________________ >> gem5-users mailing list >> [email protected] >> http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users > > I don't know for sure what the problem is, but the outputs you're seeing are > mostly normal. The LCD dual screen mode warning makes me think it might be > trying to start up a graphical console, but I don't see anything that should > make it do that. It would be helpful to hear from someone more familiar with > ARM_FS's simulation scripts.. Do you see any output from the simulator > telling you it's expecting a terminal to connect at port 3456? > > Gabe > > _______________________________________________ > gem5-users mailing list > [email protected] > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users > > _______________________________________________ > gem5-users mailing list > [email protected] > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
_______________________________________________ gem5-users mailing list [email protected] http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
