Just now this informed some error. Please tell what is wrong. Also what should be the steps to run bbench on ARM on gem5....
root@amit-VPCEB44EN:/home/amit/Gem5+/gem5-d3772fe85fa6# build/ARM/m5.fast configs/example/fs.py -b bbench-gb --kernel=vmlinux.smp.mouse.arm gem5 Simulator System. http://gem5.org gem5 is copyrighted software; use the --copyright option for details. gem5 compiled Oct 9 2012 13:59:01 gem5 started Oct 13 2012 15:31:16 gem5 executing on amit-VPCEB44EN command line: build/ARM/m5.fast configs/example/fs.py -b bbench-gb --kernel=vmlinux.smp.mouse.arm Global frequency set at 1000000000000 ticks per second info: kernel located at: /home/amit/Gem5+/dist/arm-system-2011-08/binaries/vmlinux.smp.mouse.arm Listening for system connection on port 5900 Listening for system connection on port 3456 0: system.remote_gdb.listener: listening for remote gdb on port 7000 info: Using bootloader at address 0x80000000 **** REAL SIMULATION **** info: Entering event queue @ 0. Starting simulation... warn: The clidr register always reports 0 caches. warn: clidr LoUIS field of 0b001 to match current ARM implementations. warn: The csselr register isn't implemented. warn: instruction 'mcr bpiallis' unimplemented warn: instruction 'mcr icialluis' unimplemented warn: The ccsidr register isn't implemented and always reads as 0. warn: instruction 'mcr dccimvac' unimplemented warn: instruction 'mcr dccmvau' unimplemented warn: instruction 'mcr icimvau' unimplemented warn: instruction 'mcr bpiallis' unimplemented warn: LCD dual screen mode not supported warn: instruction 'mcr bpiallis' unimplemented warn: instruction 'mcr icialluis' unimplemented warn: instruction 'mcr bpiallis' unimplemented info: VNC client attached info: VNC client detached warn: Malformed protocol version panic: Vnc client not properly attached. @ cycle 3600138963500 [write:build/ARM/base/vnc/vncserver.cc, line 317] Memory Usage: 623928 KBytes Program aborted at cycle 3600138963500 Aborted (core dumped) Please tell...Thanx in advance On Sat, Oct 13, 2012 at 3:38 PM, <[email protected]> wrote: > Send gem5-users mailing list submissions to > [email protected] > > To subscribe or unsubscribe via the World Wide Web, visit > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users > or, via email, send a message with subject or body 'help' to > [email protected] > > You can reach the person managing the list at > [email protected] > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of gem5-users digest..." > > > Today's Topics: > > 1. Re: Running bbench on ARM on Gem5 (Anthony Gutierrez) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 13 Oct 2012 06:10:54 -0400 > From: Anthony Gutierrez <[email protected]> > To: gem5 users mailing list <[email protected]> > Subject: Re: [gem5-users] Running bbench on ARM on Gem5 > Message-ID: > < > caeqebptmffs_h46s7_w_bn_dyuu0_7xaohczsgh1u8qcuqs...@mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > It seems as though it's running fine. > On Oct 13, 2012 6:02 AM, "Amit Singh" <[email protected]> wrote: > > > Hey... > > I have successfully built ARM architecture now I am trying to run > > gingerbread with bbench benchmark but it is taking so much of time as > like > > it has stuck or stalled somewhre.... Below are the instructions at the > > client site.... Please help me out... > > > > > > > > root@amit-VPCEB44EN:/home/amit/Gem5+/gem5-d3772fe85fa6# > > util/term/./m5term 127.0.0.1 3456 > > ==== m5 slave terminal: Terminal 0 ==== > > <5>Linux version 2.6.35.8-armdroid1+ (tony@edge) (gcc version 4.4.1 > > (Sourcery G++ Lite 2010q1-202) ) #6 SMP Tue Jul 19 09:54:46 EDT 2011 > > CPU: ARMv7 Processor [350fc000] revision 0 (ARMv7), cr=10c5387f > > CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache > > Machine: ARM-RealView PBX > > <4>Ignoring unrecognised tag 0x00000000 > > Memory policy: ECC disabled, Data cache writealloc > > <7>On node 0 totalpages: 65536 > > <7> DMA zone: 512 pages used for memmap > > <7> DMA zone: 0 pages reserved > > <7> DMA zone: 65024 pages, LIFO batch:15 > > <6>PERCPU: Embedded 7 pages/cpu @c06a8000 s6560 r8192 d13920 u65536 > > <6>pcpu-alloc: s6560 r8192 d13920 u65536 alloc=16*4096 > > <6>pcpu-alloc: [0] 0 > > Built 1 zonelists in Zone order, mobility grouping on. Total pages: > 65024 > > <5>Kernel command line: earlyprintk console=ttyAMA0 lpj=19988480 > > norandmaps rw loglevel=8 mem=256MB root=/dev/sda1 init=/init > > <6>PID hash table entries: 1024 (order: 0, 4096 bytes) > > <6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) > > <6>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) > > <6>Memory: 256MB = 256MB total > > <5>Memory: 255032k/255032k available, 7112k reserved, 0K highmem > > <5>Virtual kernel memory layout: > > vector : 0xffff0000 - 0xffff1000 ( 4 kB) > > fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) > > DMA : 0xffa00000 - 0xffe00000 ( 4 MB) > > vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB) > > lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) > > modules : 0xbf000000 - 0xc0000000 ( 16 MB) > > .init : 0xc0008000 - 0xc002d000 ( 148 kB) > > .text : 0xc002d000 - 0xc03d0000 (3724 kB) > > .data : 0xc03ec000 - 0xc040d740 ( 134 kB) > > <6>SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, > Nodes=1 > > <6>Hierarchical RCU implementation. > > <6> RCU-based detection of stalled CPUs is disabled. > > <6> Verbose stalled-CPUs detection is disabled. > > <6>NR_IRQS:128 > > Console: colour dummy device 80x30 > > <3>ram_console: buffer (null), invalid size 0, datasize 4294967284 > > <6>Calibrating delay loop (skipped) preset value.. <c>3997.69 BogoMIPS > > (lpj=19988480) > > <6>pid_max: default: 32768 minimum: 301 > > Mount-cache hash table entries: 512 > > <6>CPU: Testing write buffer coherency: ok > > <6>Brought up 1 CPUs > > <6>SMP: Total of 1 processors activated (3997.69 BogoMIPS). > > <6>NET: Registered protocol family 16 > > <6>L2x0 series cache controller enabled > > <6>l2x0: 8 ways, CACHE_ID 0xffffffff, AUX_CTRL 0xc2520fff > > <6>hw perfevents: no hardware support available > > <6>Serial: AMBA PL011 UART driver > > <6>dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a AMBA/PL011 > > [ 0.000000] Linux version 2.6.35.8-armdroid1+ (tony@edge) (gcc > version > > 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #6 SMP Tue Jul 19 09:54:46 EDT > 2011 > > [ 0.000000] CPU: ARMv7 Processor [350fc000] revision 0 (ARMv7), > > cr=10c5387f > > [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing > > instruction cache > > [ 0.000000] Machine: ARM-RealView PBX > > [ 0.000000] Ignoring unrecognised tag 0x00000000 > > [ 0.000000] Memory policy: ECC disabled, Data cache writealloc > > [ 0.000000] On node 0 totalpages: 65536 > > [ 0.000000] DMA zone: 512 pages used for memmap > > [ 0.000000] DMA zone: 0 pages reserved > > [ 0.000000] DMA zone: 65024 pages, LIFO batch:15 > > [ 0.000000] PERCPU: Embedded 7 pages/cpu @c06a8000 s6560 r8192 d13920 > > u65536 > > [ 0.000000] pcpu-alloc: s6560 r8192 d13920 u65536 alloc=16*4096 > > [ 0.000000] pcpu-alloc: [0] 0 > > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. > > Total pages: 65024 > > [ 0.000000] Kernel command line: earlyprintk console=ttyAMA0 > > lpj=19988480 norandmaps rw loglevel=8 mem=256MB root=/dev/sda1 init=/init > > [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) > > [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 > > bytes) > > [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 > > bytes) > > [ 0.000000] Memory: 256MB = 256MB total > > [ 0.000000] Memory: 255032k/255032k available, 7112k reserved, 0K > > highmem > > [ 0.000000] Virtual kernel memory layout: > > [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) > > [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) > > [ 0.000000] DMA : 0xffa00000 - 0xffe00000 ( 4 MB) > > [ 0.000000] vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB) > > [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) > > [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) > > [ 0.000000] .init : 0xc0008000 - 0xc002d000 ( 148 kB) > > [ 0.000000] .text : 0xc002d000 - 0xc03d0000 (3724 kB) > > [ 0.000000] .data : 0xc03ec000 - 0xc040d740 ( 134 kB) > > [ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, > > CPUs=1, Nodes=1 > > [ 0.000000] Hierarchical RCU implementation. > > [ 0.000000] RCU-based detection of stalled CPUs is disabled. > > [ 0.000000] Verbose stalled-CPUs detection is disabled. > > [ 0.000000] NR_IRQS:128 > > [ 0.000000] Console: colour dummy device 80x30 > > [ 0.000000] ram_console: buffer (null), invalid size 0, datasize > > 4294967284 > > [ 0.007961] Calibrating delay loop (skipped) preset value.. 3997.69 > > BogoMIPS (lpj=19988480) > > [ 0.007967] pid_max: default: 32768 minimum: 301 > > [ 0.007994] Mount-cache hash table entries: 512 > > [ 0.008068] CPU: Testing write buffer coherency: ok > > [ 0.008111] Brought up 1 CPUs > > [ 0.008115] SMP: Total of 1 processors activated (3997.69 BogoMIPS). > > [ 0.008741] NET: Registered protocol family 16 > > [ 0.008896] L2x0 series cache controller enabled > > [ 0.008900] l2x0: 8 ways, CACHE_ID 0xffffffff, AUX_CTRL 0xc2520fff > > [ 0.009196] hw perfevents: no hardware support available > > [ 0.009200] Serial: AMBA PL011 UART driver > > [ 0.009213] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a > > AMBA/PL011 > > <6>console [ttyAMA0] enabled > > [ 0.009369] console [ttyAMA0] enabled > > bio: create slab <bio-0> at 0 > > [ 0.011881] bio: create slab <bio-0> at 0 > > <5>SCSI subsystem initialized > > [ 0.012080] SCSI subsystem initialized > > <7>libata version 3.00 loaded. > > [ 0.012106] libata version 3.00 loaded. > > <6>usbcore: registered new interface driver usbfs > > [ 0.012162] usbcore: registered new interface driver usbfs > > <6>usbcore: registered new interface driver hub > > [ 0.012213] usbcore: registered new interface driver hub > > <6>usbcore: registered new device driver usb > > [ 0.012247] usbcore: registered new device driver usb > > <6>Advanced Linux Sound Architecture Driver Version 1.0.23. > > [ 0.012444] Advanced Linux Sound Architecture Driver Version 1.0.23. > > <6>Switching to clocksource timer3 > > [ 0.012588] Switching to clocksource timer3 > > <6>NET: Registered protocol family 2 > > [ 0.014981] NET: Registered protocol family 2 > > <6>IP route cache hash table entries: 2048 (order: 1, 8192 bytes) > > [ 0.014999] IP route cache hash table entries: 2048 (order: 1, 8192 > > bytes) > > <6>TCP established hash table entries: 8192 (order: 4, 65536 bytes) > > [ 0.015060] TCP established hash table entries: 8192 (order: 4, 65536 > > bytes) > > <6>TCP bind hash table entries: 8192 (order: 4, 65536 bytes) > > [ 0.015118] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) > > <6>TCP: Hash tables configured (established 8192 bind 8192) > > [ 0.015171] TCP: Hash tables configured (established 8192 bind 8192) > > <6>TCP reno registered > > [ 0.015178] TCP reno registered > > <6>UDP hash table entries: 128 (order: 0, 4096 bytes) > > [ 0.015183] UDP hash table entries: 128 (order: 0, 4096 bytes) > > <6>UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) > > [ 0.015195] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) > > <6>NET: Registered protocol family 1 > > [ 0.015244] NET: Registered protocol family 1 > > <6>RPC: Registered udp transport module. > > [ 0.015278] RPC: Registered udp transport module. > > <6>RPC: Registered tcp transport module. > > [ 0.015283] RPC: Registered tcp transport module. > > <6>RPC: Registered tcp NFSv4.1 backchannel transport module. > > [ 0.015289] RPC: Registered tcp NFSv4.1 backchannel transport module. > > <6>PMU: registered new PMU device of type 0 > > [ 0.015373] PMU: registered new PMU device of type 0 > > <6>ashmem: initialized > > [ 0.016101] ashmem: initialized > > <6>JFFS2 version 2.2. (NAND) ? 2001-2006 Red Hat, Inc. > > [ 0.019439] JFFS2 version 2.2. (NAND) ? 2001-2006 Red Hat, Inc. > > <6>msgmni has been set to 498 > > [ 0.019631] msgmni has been set to 498 > > <6>io scheduler noop registered > > [ 0.019643] io scheduler noop registered > > <6>io scheduler deadline registered (default) > > [ 0.019648] io scheduler deadline registered (default) > > <6>CLCD: RealView hardware, XVGA display > > [ 0.021020] CLCD: RealView hardware, XVGA display > > Console: switching to colour frame buffer device 128x48 > > [ 0.056367] Console: switching to colour frame buffer device 128x48 > > <6>scsi0 : pata_platform > > [ 0.061104] scsi0 : pata_platform > > <6>ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0x18000000 ctl > > 0x18000100 > > [ 0.061191] ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd > > 0x18000000 ctl 0x18000100 > > <6>android init > > [ 0.062202] android init > > <6>f_acm init > > [ 0.062228] f_acm init > > <6>android_register_function acm > > [ 0.062232] android_register_function acm > > <6>f_adb init > > [ 0.062236] f_adb init > > <6>android_register_function adb > > [ 0.062240] android_register_function adb > > <6>f_mass_storage init > > [ 0.062244] f_mass_storage init > > <6>android_register_function usb_mass_storage > > [ 0.062272] android_register_function usb_mass_storage > > <6>f_mtp init > > [ 0.062277] f_mtp init > > <6>android_register_function mtp > > [ 0.062281] android_register_function mtp > > <6>mice: PS/2 mouse device common for all mice > > [ 0.062448] mice: PS/2 mouse device common for all mice > > <6>usbcore: registered new interface driver usbhid > > [ 0.063430] usbcore: registered new interface driver usbhid > > <6>usbhid: USB HID core driver > > [ 0.063436] usbhid: USB HID core driver > > <6>logger: created 64K log 'log_main' > > [ 0.063518] logger: created 64K log 'log_main' > > <6>logger: created 256K log 'log_events' > > [ 0.063555] logger: created 256K log 'log_events' > > <6>logger: created 64K log 'log_radio' > > [ 0.063591] logger: created 64K log 'log_radio' > > <6>logger: created 64K log 'log_system' > > [ 0.063629] logger: created 64K log 'log_system' > > <6>ALSA device list: > > [ 0.063715] ALSA device list: > > <6> No soundcards found. > > [ 0.063719] No soundcards found. > > <6>TCP cubic registered > > [ 0.063797] TCP cubic registered > > <6>NET: Registered protocol family 17 > > [ 0.063801] NET: Registered protocol family 17 > > <6>VFP support v0.3: [ 0.063807] VFP support v0.3: implementor 41 > > architecture 4 part 30 variant a rev 0 > > implementor 41 architecture 4 part 30 variant a rev 0 > > <5>Registering SWP/SWPB emulation handler > > [ 0.063859] Registering SWP/SWPB emulation handler > > <3>drivers/rtc/hctosys.c: unable to open rtc device (rtc0) > > [ 0.063992] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) > > <6>ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66 > > [ 0.212703] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66 > > <6>ata1.00: 2096640 sectors, multi 0: LBA > > [ 0.212710] ata1.00: 2096640 sectors, multi 0: LBA > > <6>ata1.00: configured for PIO > > [ 0.212734] ata1.00: configured for PIO > > <5>scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 > > ANSI: 5 > > [ 0.212786] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk > > n/a PQ: 0 ANSI: 5 > > <5>sd 0:0:0:0: [sda] 2096640 512-byte logical blocks: (1.07 GB/1023 MiB) > > [ 0.213008] sd 0:0:0:0: [sda] 2096640 512-byte logical blocks: (1.07 > > GB/1023 MiB) > > <5>sd 0:0:0:0: [sda] Write Protect is off > > [ 0.213055] sd 0:0:0:0: [sda] Write Protect is off > > <7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > > [ 0.213062] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > > <5>sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't > > support DPO or FUA > > [ 0.213085] sd 0:0:0:0: [sda] Write cache: disabled, read cache: > > enabled, doesn't support DPO or FUA > > <6> sda:[ 0.213212] sda: sda1 sda1 > > > > <5>sd 0:0:0:0: Attached scsi generic sg0 type 0 > > [ 0.213438] sd 0:0:0:0: Attached scsi generic sg0 type 0 > > <5>sd 0:0:0:0: [sda] Attached SCSI disk > > [ 0.213617] sd 0:0:0:0: [sda] Attached SCSI disk > > <6>input: AT Raw Set 2 keyboard as /devices/fpga:kmi0/serio0/input/input0 > > [ 0.652740] input: AT Raw Set 2 keyboard as > > /devices/fpga:kmi0/serio0/input/input0 > > <6>input: touchkitPS/2 eGalax Touchscreen as > > /devices/fpga:kmi1/serio1/input/input1 > > [ 2.252714] input: touchkitPS/2 eGalax Touchscreen as > > /devices/fpga:kmi1/serio1/input/input1 > > <4>EXT2-fs (sda1): [ 2.253847] EXT2-fs (sda1): warning: mounting > > unchecked fs, running e2fsck is recommendedwarning: mounting unchecked > fs, > > running e2fsck is recommended > > > > VFS: Mounted root (ext2 filesystem) on device 8:1. > > [ 2.254015] VFS: Mounted root (ext2 filesystem) on device 8:1. > > <6>Freeing init memory: 148K > > [ 2.254029] Freeing init memory: 148K > > <3>init: cannot open '/initlogo.rle' > > [ 2.268521] init: cannot open '/initlogo.rle' > > <3>init: cannot find '/system/etc/install-recovery.sh', disabling > > 'flash_recovery' > > [ 2.277404] init: cannot find '/system/etc/install-recovery.sh', > > disabling 'flash_recovery' > > > > sh: can't access tty; job control turned off > > # > > # > > > > > > Please help me out.... > > > > Thanx in advance... > > > > _______________________________________________ > > gem5-users mailing list > > [email protected] > > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: < > http://m5sim.org/cgi-bin/mailman/private/gem5-users/attachments/20121013/fffcfbd6/attachment.html > > > > ------------------------------ > > _______________________________________________ > gem5-users mailing list > [email protected] > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users > > End of gem5-users Digest, Vol 75, Issue 64 > ****************************************** >
_______________________________________________ gem5-users mailing list [email protected] http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
