Hi,

Terribly sorry for this!

The mistake was all mine.
Restoring checkpoints begins with --checkpoint-restore=N where N >=1


I apologize for the bad post from my part

Regards
Guru


On Fri, Aug 16, 2013 at 1:54 PM, Guru Prasad <[email protected]> wrote:
> Hi,
>
> I'm running Gem5 rev 9820:2f9aecba2362
>
> I'm running Gem5 with the  following commandline
> command line: build/ARM/gem5.opt --outdir=m5out/bbench/timing
> configs/example/fs.py --checkpoint-restore=0 --kernel
> /home/guru/gem5/kernel/linux-3.3-armdroid/vmlinux --disk-image
> /home/guru/gem5/gem5-dev/system/disks/android_jb_pa_full.img
> --machine-type=VExpress_EMM --mem-type=ddr3_1600_x64 --cpu-type=atomic
> --num-cpus=1 --cpu-clock=200MHz
>
> Upon trying to restore from a checkpoint that I took earlier, I end up
> with the following output
>
> Global frequency set at 1000000000000 ticks per second
> info: Initialized simpleDRAM with name :system.physmem
> info: kernel located at: /home/guru/gem5/kernel/linux-3.3-armdroid/vmlinux
> Listening for system connection on port 5900
> Listening for system connection on port 3456
> 0: system.remote_gdb.listener: listening for remote gdb #0 on port 7000
> info: Using bootloader at address 0x10
> Traceback (most recent call last):
>   File "<string>", line 1, in <module>
>   File "/home/guru/gem5/gem5-dev/src/python/m5/main.py", line 387, in main
>     exec filecode in scope
>   File "configs/example/fs.py", line 225, in <module>
>     Simulation.run(options, root, test_sys, FutureClass)
>   File "/home/guru/gem5/gem5-dev/configs/common/Simulation.py", line 442, in 
> run
>     if options.checkpoint_restore != None and maxtick < cpt_starttick:
> UnboundLocalError: local variable 'cpt_starttick' referenced before assignment
>
> Is there something that I'm doing wrong?
>
> I am running the same kernel..
> I have not modified Gem5 between simulations..
> I literally just interrupted the previous simulation after checkpoint
> and tried to restore it.
>
> Please let me know if I'm using a wrong version of m5 (I built m5 from
> the current revision)
>
>
> Regards
> Guru
_______________________________________________
gem5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users

Reply via email to