Hi, Marcos, Thank you for releasing the translator. I still remember my struggling with a similar issue. This is very helpful.
On Fri, Apr 22, 2016 at 4:00 AM, Marcos Horro Varela <[email protected]> wrote: > Hello Andreas, > > You talked about it some time ago. I have tried it, but the documentation > still quite scarce, I think. > The aim of this tool was mainly academic, since I had to create a compiler > for a course, then I decide it to share it with you. > I also think the more compatible gem5 is with other frameworks or in this > case power models, the better. > Nevertheless, I am aware of the results McPAT can give, but as a first > approach I think it can be enough in some cases. > > Best regards, > > ----- Original Message ----- > From: "Andreas Hansson" <[email protected]> > To: "gem5 users mailing list" <[email protected]> > Sent: Thursday, April 21, 2016 12:09:26 PM > Subject: Re: [gem5-users] gem5ToMcPAT v0.1 > > Hi all, > > McPAT definitely has valid use-cases, but it is also fraught with pitfalls. > > > For anyone wanting reliable and accurate power models I can greatly > recommend: http://www.powmon.ecs.soton.ac.uk/powermodeling/ > > The generated models work very well with recent versions of gem5, as it > now supports power states, and hooks for these equation-based power models. > > Andreas > > On 21/04/2016, 10:50, "gem5-users on behalf of Raul Garcia" > <[email protected] on behalf of [email protected]> > wrote: > > >Hello Marcos, > > > >Does this translator supports inputs using the ARM architecture? If not > >what would it take to enable this support? > > > >Raul. > >________________________________________ > >From: gem5-users [[email protected]] on behalf of Kien > >[[email protected]] > >Sent: Thursday, April 21, 2016 3:03 AM > >To: [email protected] > >Subject: Re: [gem5-users] gem5ToMcPAT v0.1 > > > >Marcos Horro Varela <marcos.horro <at> udc.es> writes: > > > >> > >> Hello all, > >> > >> I would like to make an annoucement: I have been developing a translator > >from gem5 to McPAT in Bison, Flex and > >> C/C++. Basically: parses the configuration file and statistics file from > >gem5 and generates an XML based > >> on a template which fits properly as McPAT input. It seems to work > >properly. All the details and source code > >> can be found here [1]. If you have any problems using it, just tell me. > >> I would like to thank Fernando Endo for his work [2], which was really > >helpful during the process. > >> > >> Best regards, > >> > >> [1] https://github.com/markoshorro/gem5ToMcPAT > >> [2] https://tel.archives-ouvertes.fr/tel-01285964/document > >> > > > > > >Thanks Horro Varela, > > > >This is what I am looking for, but my first try with FS Alpha failed (with > >either provided xml templates or the one from mcpat with some > >modification. > > > >I got alot of warnings like these > > > >Warning: stat system 'total_cycles' may have not been set! > >Warning: stat system 'idle_cycles' may have not been set! > >Warning: stat system 'busy_cycles' may have not been set! > >Warning: param system.core0 'x86' may have not been set! > >Warning: param system.core0 'fetch_width' may have not been set! > >Warning: param system.core0 'decode_width' may have not been set! > >Warning: param system.core0 'issue_width' may have not been set! > >.... <30 + more :)> > > > >I check the template is fine as it works with mcpat, do you have any > >suggestions? > >I am using mcpat1.0 and the latest version of gem5, alpha fs image was the > >one with embedded parsec benchmarks. > > > >Thanks & regards, > >-- > >Kien > > > > > > > >_______________________________________________ > >gem5-users mailing list > >[email protected] > >http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users > >_______________________________________________ > >gem5-users mailing list > >[email protected] > >http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users > > IMPORTANT NOTICE: The contents of this email and any attachments are > confidential and may also be privileged. If you are not the intended > recipient, please notify the sender immediately and do not disclose the > contents to any other person, use it for any purpose, or store or copy the > information in any medium. Thank you. > _______________________________________________ > gem5-users mailing list > [email protected] > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users > > -- > Marcos Horro Varela, > BSc student > University of A Coruña > +34 618 62 67 37 > http://markos-horro.com > _______________________________________________ > gem5-users mailing list > [email protected] > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users > -- yw
_______________________________________________ gem5-users mailing list [email protected] http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
