Hi Michael,
Yes it is gem5 development version only.
i tried with the latest version of gem5 .
Thanks,
Bhargavi
>
>
>
> Message: 2
> Date: Fri, 28 Oct 2016 15:55:32 +0530
> From: bhargavi upadhyay <[email protected]>
> To: gem5 users mailing list <[email protected]>
> Subject: [gem5-users] :build/X86/mem/protocol/DMA_Transitions.cc error
> while running PARSEC benchmark in X86 CPU
> Message-ID:
> <CANTKUhmbN8AouZwF1pGTpC80FmBwB+SXUA8heNuMKJOnnE3NnQ@mail.
> gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hi
> I am running the gem5 version with moesi-cmp_directory protocol with ruby
> option.
> While running the PARSEc benchmark i am getting the below error.
>
> warn: ClockedObject: More than one power state change request encountered
> within the same simulation tick
> warn: ClockedObject: More than one power state change request encountered
> within the same simulation tick
> warn: ClockedObject: More than one power state change request encountered
> within the same simulation tick
> warn: Tried to clear PCI interrupt 14
> warn: ClockedObject: More than one power state change request encountered
> within the same simulation tick
> warn: ClockedObject: More than one power state change request encountered
> within the same simulation tick
> warn: ClockedObject: More than one power state change request encountered
> within the same simulation tick
> panic: Invalid transition
> system.ruby.dma_cntrl0 time: 9565378075 addr: 516698176 event:
> WriteRequest
> state: BUSY_WR
> @ tick 4782689037500
> [doTransitionWorker:build/X86/mem/protocol/DMA_Transitions.cc, line 135]
> Memory Usage: 1264276 KBytes
> Program aborted at tick 4782689037500
> --- BEGIN LIBC BACKTRACE ---
> build/X86/gem5.opt(_Z15print_backtracev+0x15)[0x805905]
> build/X86/gem5.opt(_Z12abortHandleri+0x36)[0x817836]
> /lib/x86_64-linux-gnu/libpthread.so.0(+0x10330)[0x7f2dde4db330]
> /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x37)[0x7f2ddca2ac37]
> /lib/x86_64-linux-gnu/libc.so.6(abort+0x148)[0x7f2ddca2e028]
> build/X86/gem5.opt(_Z15__exit_epilogueiPKcS0_iS0_+0x1ec)[0x95fffc]
> build/X86/gem5.opt(_ZN14DMA_Controller18doTransitionWorker
> E9DMA_Event9DMA_StateRS1_RP7DMA_TBEm+0x2b8)[0xa54478]
> build/X86/gem5.opt(_ZN14DMA_Controller12doTransitionE9DMA_
> EventP7DMA_TBEm+0x1c3)[0xa546a3]
> build/X86/gem5.opt(_ZN14DMA_Controller6wakeupEv+0x33d)[0xa5704d]
> build/X86/gem5.opt(_ZN10EventQueue10serviceOneEv+0xb1)[0x80fca1]
> build/X86/gem5.opt(_Z9doSimLoopP10EventQueue+0x38)[0x832208]
> build/X86/gem5.opt(_Z8simulatem+0x1fb)[0x83278b]
> build/X86/gem5.opt[0xb5a33c]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x45f7)[
> 0x7f2dde0f3af7]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x80d)[
> 0x7f2dde0f554d]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x48d8)[
> 0x7f2dde0f3dd8]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x4b59)[
> 0x7f2dde0f4059]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x4b59)[
> 0x7f2dde0f4059]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x80d)[
> 0x7f2dde0f554d]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_
> EvalCode+0x32)[0x7f2dde0f5682]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x563e)[
> 0x7f2dde0f4b3e]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x80d)[
> 0x7f2dde0f554d]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x48d8)[
> 0x7f2dde0f3dd8]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x80d)[
> 0x7f2dde0f554d]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_
> EvalCode+0x32)[0x7f2dde0f5682]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyRun_StringFlags+0x79)[
> 0x7f2dde0ef4b9]
> build/X86/gem5.opt(_Z6m5MainiPPc+0x7f)[0x81710f]
> build/X86/gem5.opt(main+0x33)[0x7184c3]
> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5)[0x7f2ddca15f45]
> build/X86/gem5.opt[0x744c83]
>
> In telnet terminal i am getting the below output
> hda: M5 IDE Disk, ATA DISK drive
> hdb: M5 IDE Disk, ATA DISK drive
> hda: UDMA/33 mode selected
> hdb: UDMA/33 mode selected
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> isa bounce pool size: 16 pages
> ide1 at 0x170-0x177,0x376 on irq 15
> ide_generic: please use "probe_mask=0x3f" module parameter for probing all
> legacy ISA IDE ports
> ide-gd driver 1.18
> hda: max request size: 128KiB
> hda: 4194288 sectors (2147 MB), CHS=4161/16/63
> hda:Connection closed by foreign host.
>
> Anyone can provide the solution for this?
>
> Thanks,
> Bhargavi
>
>
> --
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://m5sim.org/cgi-bin/mailman/private/gem5-users/
> attachments/20161028/e32d4437/attachment-0001.html>
>
> ------------------------------
>
> Message: 3
> Date: Fri, 28 Oct 2016 15:57:31 +0000
> From: "Lebeane, Michael" <[email protected]>
> To: gem5 users mailing list <[email protected]>
> Subject: Re: [gem5-users] :build/X86/mem/protocol/DMA_Transitions.cc
> error while running PARSEC benchmark in X86 CPU
> Message-ID:
> <BY2PR1201MB09179A6D6AE3A7EAB4E1DADBF0AD0@BY2PR1201MB0917.
> namprd12.prod.outlook.com>
>
> Content-Type: text/plain; charset="utf-8"
>
> Hi Bhargavi,
>
> Are you using the development version of gem5? How long has it been since
> you pulled changesets?
>
> Can you run again your workload again with some debug flags enabled?
> ProtocolTrace and RubyDma would be good to start with. You can enable them
> near the point of failure with the –debug-start flag.
>
> Thanks,
> Michael LeBeane
>
> From: gem5-users [mailto:[email protected]] On Behalf Of
> bhargavi upadhyay
> Sent: Friday, October 28, 2016 5:26 AM
> To: gem5 users mailing list <[email protected]>
> Subject: [gem5-users] :build/X86/mem/protocol/DMA_Transitions.cc error
> while running PARSEC benchmark in X86 CPU
>
> Hi
> I am running the gem5 version with moesi-cmp_directory protocol with ruby
> option.
> While running the PARSEc benchmark i am getting the below error.
>
> warn: ClockedObject: More than one power state change request encountered
> within the same simulation tick
> warn: ClockedObject: More than one power state change request encountered
> within the same simulation tick
> warn: ClockedObject: More than one power state change request encountered
> within the same simulation tick
> warn: Tried to clear PCI interrupt 14
> warn: ClockedObject: More than one power state change request encountered
> within the same simulation tick
> warn: ClockedObject: More than one power state change request encountered
> within the same simulation tick
> warn: ClockedObject: More than one power state change request encountered
> within the same simulation tick
> panic: Invalid transition
> system.ruby.dma_cntrl0 time: 9565378075 addr: 516698176 event:
> WriteRequest state: BUSY_WR
> @ tick 4782689037500
> [doTransitionWorker:build/X86/mem/protocol/DMA_Transitions.cc, line 135]
> Memory Usage: 1264276 KBytes
> Program aborted at tick 4782689037500
> --- BEGIN LIBC BACKTRACE ---
> build/X86/gem5.opt(_Z15print_backtracev+0x15)[0x805905]
> build/X86/gem5.opt(_Z12abortHandleri+0x36)[0x817836]
> /lib/x86_64-linux-gnu/libpthread.so.0(+0x10330)[0x7f2dde4db330]
> /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x37)[0x7f2ddca2ac37]
> /lib/x86_64-linux-gnu/libc.so.6(abort+0x148)[0x7f2ddca2e028]
> build/X86/gem5.opt(_Z15__exit_epilogueiPKcS0_iS0_+0x1ec)[0x95fffc]
> build/X86/gem5.opt(_ZN14DMA_Controller18doTransitionWorker
> E9DMA_Event9DMA_StateRS1_RP7DMA_TBEm+0x2b8)[0xa54478]
> build/X86/gem5.opt(_ZN14DMA_Controller12doTransitionE9DMA_
> EventP7DMA_TBEm+0x1c3)[0xa546a3]
> build/X86/gem5.opt(_ZN14DMA_Controller6wakeupEv+0x33d)[0xa5704d]
> build/X86/gem5.opt(_ZN10EventQueue10serviceOneEv+0xb1)[0x80fca1]
> build/X86/gem5.opt(_Z9doSimLoopP10EventQueue+0x38)[0x832208]
> build/X86/gem5.opt(_Z8simulatem+0x1fb)[0x83278b]
> build/X86/gem5.opt[0xb5a33c]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x45f7)[
> 0x7f2dde0f3af7]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x80d)[
> 0x7f2dde0f554d]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x48d8)[
> 0x7f2dde0f3dd8]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x4b59)[
> 0x7f2dde0f4059]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x4b59)[
> 0x7f2dde0f4059]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x80d)[
> 0x7f2dde0f554d]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_
> EvalCode+0x32)[0x7f2dde0f5682]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x563e)[
> 0x7f2dde0f4b3e]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x80d)[
> 0x7f2dde0f554d]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x48d8)[
> 0x7f2dde0f3dd8]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x80d)[
> 0x7f2dde0f554d]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_
> EvalCode+0x32)[0x7f2dde0f5682]
> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyRun_StringFlags+0x79)[
> 0x7f2dde0ef4b9]
> build/X86/gem5.opt(_Z6m5MainiPPc+0x7f)[0x81710f]
> build/X86/gem5.opt(main+0x33)[0x7184c3]
> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5)[0x7f2ddca15f45]
> build/X86/gem5.opt[0x744c83]
> In telnet terminal i am getting the below output
> hda: M5 IDE Disk, ATA DISK drive
> hdb: M5 IDE Disk, ATA DISK drive
> hda: UDMA/33 mode selected
> hdb: UDMA/33 mode selected
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> isa bounce pool size: 16 pages
> ide1 at 0x170-0x177,0x376 on irq 15
> ide_generic: please use "probe_mask=0x3f" module parameter for probing all
> legacy ISA IDE ports
> ide-gd driver 1.18
> hda: max request size: 128KiB
> hda: 4194288 sectors (2147 MB), CHS=4161/16/63
> hda:Connection closed by foreign host.
> Anyone can provide the solution for this?
> Thanks,
> Bhargavi
>
>
> --
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://m5sim.org/cgi-bin/mailman/private/gem5-users/
> attachments/20161028/8a03546a/attachment-0001.html>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> gem5-users mailing list
> [email protected]
> http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
>
> ------------------------------
>
> End of gem5-users Digest, Vol 123, Issue 22
> *******************************************
>
--
Bhargavi R. Upadhyay
Assistant professor,
Dept. of Computer Science & Engg.,
Amrita Vishwa Vidyapeetham (University),
Amrita School of Engineering,
Bangalore 560035
Karnataka, INDIA
_______________________________________________
gem5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
