I tried simple network option. However, the result is the same. Please let me know, if I am missing any option to add (I used all the default settings). However, I also run the garent_standalone protocol with the default settings, which runs properly.
./build/ALPHA/gem5.opt configs/example/fs.py --cpu-type=timing --script=script/blackscholes_4c_simsmall.rcS --num-cpus=4 --ruby --mesh-rows=2 --network=simple --topology=Mesh_XY --caches --l2cache --l2_size=512kB --num-dirs=4 --num-l2=4 --l1d_size=32kB --l1i_size=32kB --l1d_assoc=2 --l1i_assoc=2 panic: Invalid transition system.ruby.dma_cntrl0 time: 4722258003 addr: 523845696 event: WriteRequest state: BUSY_WR @ tick 2361129001500 [doTransitionWorker:build/ALPHA/mem/protocol/DMA_Transitions.cc, line 135] Memory Usage: 1015648 KBytes Thanks a lot. F. A. Faisal On Sat, May 6, 2017 at 2:32 AM, Krishna, Tushar <[email protected]> wrote: > Hmm the coherence protocol seems to have received an invalid transaction. > Not sure why. This does not seem to be a network issue. But for a sanity > check, run with network=simple and see if it still fails. > > Cheers, > Tushar > > On May 5, 2017, at 11:46 AM, F. A. Faisal <[email protected]> wrote: > > Thanks a lot. > > I already figured out that problem by myself. > However, I encountered a new problem in running 4 core 4 threads > blackscholes benchmarks. It shows system panic. > I also tried for 16 cpu and Mesh network, which is still running more than > 8 hours. > > I used the mesh_xy topology along with below config- > > scons FULL_SYSTEM=1 build/ALPHA/gem5.opt RUBY=true > PROTOCOL=MOESI_CMP_directory > > ./build/ALPHA/gem5.opt configs/example/fs.py --cpu-type=timing > --script=script/blackscholes_4c_simsmall.rcS --num-cpus=4 --ruby > --mesh-rows=2 --network=garnet2.0 --topology=Mesh_XY --caches --l2cache > --l2_size=512kB --num-dirs=4 --num-l2=4 --l1d_size=32kB --l1i_size=32kB > --l1d_assoc=2 --l1i_assoc=2 > > It showed me the below error- > ---------------------------------------------- > > panic: Invalid transition > > system.ruby.dma_cntrl0 time: 4816339893 addr: 525287488 event: > WriteRequest state: BUSY_WR > > @ tick 2408169946500 > > [doTransitionWorker:build/ALPHA/mem/protocol/DMA_Transitions.cc, line 135] > > Memory Usage: 996944 KBytes > > Program aborted at tick 2408169946500 > > --- BEGIN LIBC BACKTRACE --- > > ./build/ALPHA/gem5.opt[0x829015] > > ./build/ALPHA/gem5.opt[0x839d96] > > /lib64/libpthread.so.0[0x3685e0f730] > > /lib64/libc.so.6(gsignal+0x3e)[0x3685a3266e] > > /lib64/libc.so.6(abort+0x175)[0x3685a33ab5] > > ./build/ALPHA/gem5.opt[0x6867ac] > > ./build/ALPHA/gem5.opt[0x631c58] > > ./build/ALPHA/gem5.opt[0x631e83] > > ./build/ALPHA/gem5.opt[0x634aad] > > ./build/ALPHA/gem5.opt[0x8321d1] > > ./build/ALPHA/gem5.opt[0x852538] > > ./build/ALPHA/gem5.opt[0x852abb] > > ./build/ALPHA/gem5.opt[0x7d8d2d] > > /usr/lib64/libpython2.6.so.1.0(PyEval_EvalFrameEx+0x4e26)[0x369ced55b6] > > /usr/lib64/libpython2.6.so.1.0(PyEval_EvalCodeEx+0x927)[0x369ced7647] > > /usr/lib64/libpython2.6.so.1.0(PyEval_EvalFrameEx+0x5304)[0x369ced5a94] > > /usr/lib64/libpython2.6.so.1.0(PyEval_EvalFrameEx+0x63ef)[0x369ced6b7f] > > /usr/lib64/libpython2.6.so.1.0(PyEval_EvalFrameEx+0x63ef)[0x369ced6b7f] > > /usr/lib64/libpython2.6.so.1.0(PyEval_EvalCodeEx+0x927)[0x369ced7647] > > /usr/lib64/libpython2.6.so.1.0(PyEval_EvalCode+0x32)[0x369ced7722] > > /usr/lib64/libpython2.6.so.1.0(PyEval_EvalFrameEx+0x54f2)[0x369ced5c82] > > /usr/lib64/libpython2.6.so.1.0(PyEval_EvalCodeEx+0x927)[0x369ced7647] > > /usr/lib64/libpython2.6.so.1.0(PyEval_EvalFrameEx+0x5304)[0x369ced5a94] > > /usr/lib64/libpython2.6.so.1.0(PyEval_EvalCodeEx+0x927)[0x369ced7647] > > /usr/lib64/libpython2.6.so.1.0(PyEval_EvalCode+0x32)[0x369ced7722] > > /usr/lib64/libpython2.6.so.1.0[0x369cef1b9c] > > /usr/lib64/libpython2.6.so.1.0(PyRun_StringFlags+0x7a)[0x369cef1daa] > > ./build/ALPHA/gem5.opt[0x83967f] > > ./build/ALPHA/gem5.opt[0x415453] > > /lib64/libc.so.6(__libc_start_main+0xfd)[0x3685a1f56d] > > ./build/ALPHA/gem5.opt[0x43b1b1] > > --- END LIBC BACKTRACE --- > > Aborted (core dumped) > ---------------------------------------------------- > > Best regards, > > F. A. Faisal > > > On Fri, May 5, 2017 at 11:22 PM, Krishna, Tushar <[email protected]> > wrote: > >> Hi Faisal, >> You can still add --topology with the fs.py file. >> You need to also add --ruby to run ruby. >> >> For running garnet, you can add a --network=garnet2.0 >> (Look at options in the garnet2.0 page on the wiki). >> >> Cheers, >> Tushar >> >> On May 3, 2017, at 10:50 AM, F. A. Faisal <[email protected]> wrote: >> >> Hi, >> >> I like to invoke the garnet 2.0 for running the benchmark programs Parsec >> 2.1. >> However, previous ruby_fs.py file located at configs/example/ folder is >> not available with the current gem5 source, which could invoke the >> garnet 1.0. And now the replaced fs.py file don't have option like- >> topology, garnet. Hence, can any one please let me know how to invoke the >> garnet 2.0 for full system simulation. >> >> Command for previous gem5 with garnet 1.0- >> >> scons build/ALPHA_FS/gem5.opt RUBY=true PROTOCOL=MOESI_CMP_directory >> >> build/ALPHA_FS/gem5.opt configs/example/ruby_fs.py --num-cpus=4 --num-dirs=4 >> --num-l2caches=4 --topology=Mesh --mesh-rows=2 --garnet=fixed >> --kernel=vmlinux_2.6.27-gcc_4.3.4 --script=scripts/runparsec1.rcS >> >> >> Thanks in advance. >> >> >> F. A. Faisal >> >> _______________________________________________ >> gem5-users mailing list >> [email protected] >> http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users >> >> >> _______________________________________________ >> gem5-users mailing list >> [email protected] >> http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users >> > > _______________________________________________ > gem5-users mailing list > [email protected] > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users > > > _______________________________________________ > gem5-users mailing list > [email protected] > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users >
_______________________________________________ gem5-users mailing list [email protected] http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
