hi Ciro; so i downloaded parsec which is in the link you sent me but did i copy it directly into the linaro arch64 image or i add the patch for arch64 i did not understand well ?? because I need to copy parsec 3.0 in the linaro image to run with gem5.
thanks; 2018-05-12 17:28 GMT+02:00 Ciro Santilli <ciro.santi...@gmail.com>: > I don't think those patches are enough to run all benchmarks, and I > have never seen a set of patches that just worked for all benchmarks so > far. > > I have part of parsec benchmarks working at: > https://github.com/cirosantilli/linux-kernel-module-cheat/tree/ > d1f676a680aca90e525f14d90605393a9742d09b#parsec-benchmark > and I'm clearly documenting what works and does not at: > https://github.com/cirosantilli/parsec-benchmark > > On Sat, May 12, 2018 at 3:17 PM, commerce _com <commercecom...@gmail.com> > wrote: > > hi all; > > > > I need to compile parsec 3.0 with Cross-Compile: > > > > here are the steps that I followed: > > > > I downloaded gcc-linaro-5.5.0-2017.10-x86_64_aarch64-linux-gnu and I > > modified the xcompile-patch.diff file as follows: > > > > # CC_HOME is root installation of the C compiler > > - export CC_HOME = "/ usr" > > + export CC_HOME = "/ media / ali / ali / parsec-3.0 / > > gcc-linaro-5.5.0-2017.10-x86_64_aarch64-linux-gnu" > > # BINUTIL_HOME is root installation of the GNU binutils > > - export BINUTIL_HOME = "/ usr" > > + export BINUTIL_HOME = "/ media / ali / ali / parsec-3.0 / > > gcc-linaro-5.5.0-2017.10-x86_64_aarch64-linux-gnu / aarch64-linux-gnu" > > # GNUTOOL_HOME is root installation of the GNU tools > > export GNUTOOL_HOME = "/ usr" > > # BINARY_PREFIX is the string which is used as prefix for the GNU > > binaries > > export BINARY_PREFIX = "" > > + # GCC_PREFIX is the string which is used as prefix for the compilers > and > > preprocessors > > + export GCC_PREFIX = "aarch64-linux-gnu-" > > > > I typed the command: > > patch -p1 <xcompile-patch.diff > > > > I found the following result: > > patching file config / gcc.bldconf > > patching file pkgs / apps / blackscholes / parsec / gcc-pthreads.bldconf > > patching file pkgs / apps / bodytrack / parsec / gcc-pthreads.bldconf > > patching file pkgs / apps / facesim / parsec / gcc-pthreads.bldconf > > patching file pkgs / apps / ferret / parsec / gcc-pthreads.bldconf > > patching file pkgs / apps / fluidanimate / parsec / gcc-pthreads.bldconf > > patching file pkgs / apps / raytrace / parsec / gcc-pthreads.bldconf > > patching file pkgs / apps / swaptions / parsec / gcc-pthreads.bldconf > > patching pkgs file / apps / vips / parsec / gcc-pthreads.bldconf > > patching pkgs file / apps / x264 / parsec / gcc-pthreads.bldconf > > patching file pkgs / kernel / canneal / parsec / gcc-pthreads.bldconf > > patching file pkgs / kernel / dedup / parsec / gcc-pthreads.bldconf > > patching file pkgs / kernels / streamcluster / parsec / > gcc-pthreads.bldconf > > patching file pkgs /libs/glib/parsec/gcc.bldconf > > patching file pkgs /libs/gsl/parsec/gcc.bldconf > > patching file pkgs / libs / hooks / parsec / gcc.bldconf > > patching file pkgs / libs / hooks / src / hooks.c > > patching pkgs file / libs / libjpeg / parsec / gcc.bldconf > > patching file pkgs /libs/libxml2/parsec/gcc.bldconf > > patching file pkgs / libs / mesa / parsec / gcc.bldconf > > patching file pkgs / libs / parmacs / parsec / gcc.bldconf > > patching file pkgs /libs/ssl/parsec/gcc.bldconf > > patching file pkgs /libs/tbblib/parsec/gcc.bldconf > > patching file pkgs / libs / uptcpip / parsec / gcc.bldconf > > patching file pkgs /libs/zlib/parsec/gcc.bldconf > > patching file pkgs / tools / cmake / parsec / gcc.bldconf > > patching file pkgs / tools / libtool / parsec / gcc.bldconf > > patching file pkgs / tools / yasm / parsec / gcc.bldconf > > > > after I typed the following commands: > > > > export PARSECPLAT = "aarch64-linux" > > source ./env.sh > > parsecmgmt -a build -c gcc-hooks -p blackscholes > > > > and I found this error is in the last line: > > > > [PARSEC] Packages to build: parsec.blackscholes > > > > [PARSEC] [========== Building package parsec.blackscholes [1] ==========] > > [PARSEC] [---------- Analyzing package parsec.blackscholes ----------] > > [PARSEC] parsec.blackscholes depends on: hooks > > [PARSEC] [---------- Analyzing package parsec.hooks ----------] > > [PARSEC] parsec.hooks depends on: libtool > > [PARSEC] [---------- Analyzing package parsec.libtool ----------] > > [PARSEC] parsec.libtool does not depend on any other packages. > > [PARSEC] [---------- Building package parsec.libtool ----------] > > [PARSEC] Running 'env LIBS= > > /media/ali/ali/parsec-3.0/pkgs/tools/libtool/src/configure > > --build=x86_64-linux-gnu --host=aarch64-linux-gnu > > --prefix=/media/ali/ali/parsec-3.0/pkgs/tools/libtool/ > inst/aarch64-linux.gcc-hooks': > > ## ------------------------- ## > > ## Configuring libtool 2.2.6 ## > > ## ------------------------- ## > > > > checking for a BSD-compatible install... > > /media/ali/ali/parsec-3.0/bin/install -c > > checking whether build environment is sane... yes > > checking for a thread-safe mkdir -p... /bin/mkdir -p > > checking for gawk... no > > checking for mawk... mawk > > checking whether /usr/bin/make sets $(MAKE)... yes > > checking for aarch64-linux-gnu-strip... > > /media/ali/ali/parsec-3.0/gcc-linaro-5.5.0-2017.10-x86_64_ > aarch64-linux-gnu/aarch64-linux-gnu/bin/strip > > checking whether subdir libobjs are useable... yes > > checking for aarch64-linux-gnu-gcc... > > /media/ali/ali/parsec-3.0/gcc-linaro-5.5.0-2017.10-x86_64_ > aarch64-linux-gnu/bin/aarch64-linux-gnu-gcc > > checking for C compiler default output file name... a.out > > checking whether the C compiler works... yes > > checking whether we are cross compiling... yes > > checking for suffix of executables... > > checking for suffix of object files... o > > checking whether we are using the GNU C compiler... yes > > checking whether > > /media/ali/ali/parsec-3.0/gcc-linaro-5.5.0-2017.10-x86_64_ > aarch64-linux-gnu/bin/aarch64-linux-gnu-gcc > > accepts -g... yes > > checking for > > /media/ali/ali/parsec-3.0/gcc-linaro-5.5.0-2017.10-x86_64_ > aarch64-linux-gnu/bin/aarch64-linux-gnu-gcc > > option to accept ISO C89... none needed > > checking for style of include used by /usr/bin/make... GNU > > checking dependency style of > > /media/ali/ali/parsec-3.0/gcc-linaro-5.5.0-2017.10-x86_64_ > aarch64-linux-gnu/bin/aarch64-linux-gnu-gcc... > > gcc3 > > checking whether > > /media/ali/ali/parsec-3.0/gcc-linaro-5.5.0-2017.10-x86_64_ > aarch64-linux-gnu/bin/aarch64-linux-gnu-gcc > > and cc understand -c and -o together... yes > > checking how to run the C preprocessor... > > /media/ali/ali/parsec-3.0/gcc-linaro-5.5.0-2017.10-x86_64_ > aarch64-linux-gnu/bin/aarch64-linux-gnu-cpp > > checking build system type... x86_64-pc-linux-gnu > > checking host system type... Invalid configuration `aarch64-linux-gnu': > > machine `aarch64' not recognized > > configure: error: /bin/bash > > /media/ali/ali/parsec-3.0/pkgs/tools/libtool/src/ > libltdl/config/config.sub > > aarch64-linux-gnu failed > > [PARSEC] Error: 'env LIBS= > > /media/ali/ali/parsec-3.0/pkgs/tools/libtool/src/configure > > --build=x86_64-linux-gnu --host=aarch64-linux-gnu > > --prefix=/media/ali/ali/parsec-3.0/pkgs/tools/libtool/ > inst/aarch64-linux.gcc-hooks' > > failed. > > > > > > THANKS; > > > > > > _______________________________________________ > > gem5-users mailing list > > gem5-users@gem5.org > > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users > _______________________________________________ > gem5-users mailing list > gem5-users@gem5.org > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
_______________________________________________ gem5-users mailing list gem5-users@gem5.org http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
