Can you try this command line: ./build/X86/gem5.opt configs/example/fs.py --cpu-type=DerivO3CPU --caches --disk-image=(point to ur disk) --kernel=(point to ur kernel)
And try a new image and kernel. For e.g., you can try to use Parsec image x86 image to test if that works or not. (x86 image: http://www.cs.utexas.edu/~cart/parsec_m5/) Best regards, Abhishek On Tue, Mar 5, 2019 at 2:46 PM Sethu Jose <sethuj...@gmail.com> wrote: > Hi Abhishek, > > I tried the baseline system without the L2 cache. I get the same error > when I use the DerivO3CPU. > > The command I'm using is 'build/X86/gem5.opt configs/full_system/run.py'. > I have also tried with gem5.debug. > > run.py is same as the file available in this link: > http://learning.gem5.org/book/part5/fs_config.html#running-a-full-system-simulation > system.py is same as in the link except that I have modified it to use > DerivO3CPU. Following are my modification: > > self.cpu = DerivO3CPU() > self.mem_mode = 'timing' > > Thanks in advance for any suggestions. > > Regards, > Sethu > > On Tue, Mar 5, 2019 at 1:55 PM Abhishek Singh < > abhishek.singh199...@gmail.com> wrote: > >> Hello Sethu, >> >> Did you try baseline i.e, without making any changes to cache and can you >> the also mention the command line statement? >> >> Best regards, >> >> Abhishek >> >> >> On Tue, Mar 5, 2019 at 1:20 PM Sethu Jose <sethuj...@gmail.com> wrote: >> >>> Hi, >>> >>> I'm using the full system config explained in this page: >>> http://learning.gem5.org/book/part5/fs_config.html#running-a-full-system-simulation >>> >>> I have modified the cache hierarchy to have a unified L2 cache. This >>> config works as long as I use AtomicSimpleCPU or TimingSimpleCPU. >>> >>> When I switch to DerivO3CPU, it gives run time assertion error in the >>> Packet::getPtr() method of mem/packet.hh file. I have added the error to >>> the end of this mail. >>> >>> I have tried with gem5.debug and also with varing sizes for cache. >>> However, the assertion is always failing. >>> >>> Any help would be appreciated. >>> >>> *Error*: >>> Global frequency set at 1000000000000 ticks per second >>> warn: DRAM device capacity (8192 Mbytes) does not match the address >>> range assigned (512 Mbytes) >>> info: kernel located at: >>> /home/sethu/workspace/_x86/configs/full_system/binaries/x86_64-vmlinux-2.6.22.9 >>> system.pc.com_1.device: Listening for connections on port 3456 >>> 0: rtc: Real-time clock set to Sun Jan 1 00:00:00 2012 >>> 0: system.remote_gdb: listening for remote gdb on port 7000 >>> warn: Reading current count from inactive timer. >>> Running the simulation >>> info: Entering event queue @ 0. Starting simulation... >>> gem5.opt: build/X86/mem/packet.hh:1047: T* Packet::getPtr() [with T = >>> unsigned char]: Assertion `flags.isSet(STATIC_DATA|DYNAMIC_DATA)' failed. >>> Program aborted at tick 11005983 >>> --- BEGIN LIBC BACKTRACE --- >>> build/X86/gem5.opt(_Z15print_backtracev+0x2c)[0x561d1302bccc] >>> build/X86/gem5.opt(_Z12abortHandleri+0x4a)[0x561d1303e09a] >>> /lib/x86_64-linux-gnu/libpthread.so.0(+0x12890)[0x7faf396a7890] >>> /lib/x86_64-linux-gnu/libc.so.6(gsignal+0xc7)[0x7faf37c83e97] >>> /lib/x86_64-linux-gnu/libc.so.6(abort+0x141)[0x7faf37c85801] >>> /lib/x86_64-linux-gnu/libc.so.6(+0x3039a)[0x7faf37c7539a] >>> /lib/x86_64-linux-gnu/libc.so.6(+0x30412)[0x7faf37c75412] >>> >>> build/X86/gem5.opt(_ZN6X86ISA13handleIprReadEP13ThreadContextP6Packet+0x17c)[0x561d12365ddc] >>> >>> build/X86/gem5.opt(_ZN7LSQUnitI9O3CPUImplE4readEPN3LSQIS0_E10LSQRequestEi+0x431)[0x561d12322f71] >>> >>> build/X86/gem5.opt(_ZN3LSQI9O3CPUImplE4readEPNS1_10LSQRequestEi+0xad)[0x561d1236c77d] >>> >>> build/X86/gem5.opt(_ZN3LSQI9O3CPUImplE11pushRequestERK14RefCountingPtrI13BaseO3DynInstIS0_EEbPhjm5FlagsImEPmP15AtomicOpFunctor+0x523)[0x561d1236cd13] >>> >>> build/X86/gem5.opt(_ZN11BaseDynInstI9O3CPUImplE15initiateMemReadEmj5FlagsImE+0x7b)[0x561d1230444b] >>> >>> build/X86/gem5.opt(_ZNK10X86ISAInst5LdBig11initiateAccEP11ExecContextPN5Trace10InstRecordE+0xd1)[0x561d12867e31] >>> >>> build/X86/gem5.opt(_ZN13BaseO3DynInstI9O3CPUImplE11initiateAccEv+0x45)[0x561d1233b135] >>> >>> build/X86/gem5.opt(_ZN7LSQUnitI9O3CPUImplE11executeLoadERK14RefCountingPtrI13BaseO3DynInstIS0_EE+0x57)[0x561d12376e87] >>> >>> build/X86/gem5.opt(_ZN3LSQI9O3CPUImplE11executeLoadERK14RefCountingPtrI13BaseO3DynInstIS0_EE+0x3b)[0x561d1236666b] >>> >>> build/X86/gem5.opt(_ZN10DefaultIEWI9O3CPUImplE12executeInstsEv+0xf06)[0x561d12354696] >>> >>> build/X86/gem5.opt(_ZN10DefaultIEWI9O3CPUImplE4tickEv+0x8c0)[0x561d123581a0] >>> >>> build/X86/gem5.opt(_ZN9FullO3CPUI9O3CPUImplE4tickEv+0x144)[0x561d12326d64] >>> build/X86/gem5.opt(_ZN10EventQueue10serviceOneEv+0xd9)[0x561d13033aa9] >>> build/X86/gem5.opt(_Z9doSimLoopP10EventQueue+0x87)[0x561d1304f287] >>> build/X86/gem5.opt(_Z8simulatem+0xcaa)[0x561d130502ca] >>> build/X86/gem5.opt(+0x13741ce)[0x561d131351ce] >>> build/X86/gem5.opt(+0x4fd95e)[0x561d122be95e] >>> >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x64d7)[0x7faf39961697] >>> >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x7d8)[0x7faf39a93278] >>> >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x5bf6)[0x7faf39960db6] >>> >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x7d8)[0x7faf39a93278] >>> >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCode+0x19)[0x7faf3995b029] >>> >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x6ac0)[0x7faf39961c80] >>> >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x7d8)[0x7faf39a93278] >>> >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x5bf6)[0x7faf39960db6] >>> --- END LIBC BACKTRACE --- >>> Aborted (core dumped) >>> >>> -- >>> Thanks and Regards, >>> Sethu >>> >>> _______________________________________________ >>> gem5-users mailing list >>> gem5-users@gem5.org >>> http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users >> >> > > -- > Thanks and Regards, > Sethu > >
_______________________________________________ gem5-users mailing list gem5-users@gem5.org http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users