I'm not quite sure if that'll work with multiple SMT CPUs running but in
theory all hardware threads should be registered with the system...
On Sun, Apr 20, 2008 at 11:59 AM, Korey Sewell <[EMAIL PROTECTED]> wrote:
> correct, changing that will do the trick in a similar fashion.What you
> probably want to do is implement the exit function in
> cpu/o3/thread_context.hh so that it's architecture independent.
>
> Soon, both exit() functions need to be toggled using some simulation
> option as well.
>
>
> On Sun, Apr 20, 2008 at 11:42 AM, jerry lrui <[EMAIL PROTECTED]> wrote:
>
> > Yes. There are a little differences in these exit() functions. In
> > o3 exit function only check the current CPU's active threads but not the
> > whole system. These codes should be also changed to solve this problem.
> > Right?
> >
> > Jerry
> >
> > On 4/20/08, Korey Sewell <[EMAIL PROTECTED]> wrote:
> > >
> > > Are you trying to run SMT or 2 CPUs?
> > >
> > > If you are trying to run two CPUs then you have to explicitly assign
> > > diff. workloads in your se.py file.
> > >
> > > I think O3 only checks other SMT threads before returning true on
> > > exit.... If so, check the exit() function in in simple_thread.hh and make
> > > sure the one in src/cpu/o3/alpha/thread_context.hh resembles the same
> > > code...
> > >
> > >
> > >
> > > On Sun, Apr 20, 2008 at 9:19 AM, jerry lrui <[EMAIL PROTECTED]>
> > > wrote:
> > >
> > > > Korey,
> > > >
> > > > Thanks a lot! I've patched the program by using the patch you
> > > > posted. Now the program is running very well on SimpleCPU. But when I
> > > > change
> > > > the CPU model to O3CPU there also seems only one workload has been run.
> > > >
> > > > system = System(cpu = [DerivO3CPU(cpu_id=0,clock="1GHz"),
> > > > DerivO3CPU(cpu_id=1,clock="2GHz")],
> > > > physmem = PhysicalMemory(range=AddrRange("512MB")),
> > > >
> > > > membus = Bus(), mem_mode = 'timing')
> > > >
> > > > Can you further check the code? I'm using M5 2.0b5 now.* *Thanks.
> > > >
> > > > Jerry
> > > >
> > > > On 4/20/08, Korey Sewell <[EMAIL PROTECTED]> wrote:
> > > > >
> > > > > I just sent out a patch that should enforce all threads finishing
> > > > > before ending simulation.
> > > > >
> > > > > This hasnt been implemented as a command line option yet. I'll be
> > > > > doing that soon ....
> > > > >
> > > > > Let me know if what I'm doing in the patch makes sense to people
> > > > > (or if I need to explain what I'm doing)....
> > > > >
> > > > > -Korey
> > > > >
> > > > >
> > > > > On Tue, Apr 15, 2008 at 11:26 AM, Korey Sewell <[EMAIL PROTECTED]>
> > > > > wrote:
> > > > >
> > > > > > well... it's the exit() syscall and then it's modifying the
> > > > > > ThreadContext exit() function which is called in the exit()
> > > > > > syscall so
> > > > > > that it looks at the other threads in the system and and returns
> > > > > > the
> > > > > > right value (1?) only if it is the only thread remaining.
> > > > > >
> > > > > > Something like this is already done for the O3 CPU, but not for
> > > > > > SimpleCPU as of yet (patch outstanding)...
> > > > > >
> > > > > > It might be a little tricky, but definitely do-able if you need
> > > > > > it
> > > > > > *like now/today* instead of the pretty near future...
> > > > > >
> > > > > > FYI:
> > > > > > exit syscall should be found in syscall_emul.hh/cc
> > > > > > thread context is found in cpu/thread_context.hh
> > > > > >
> > > > > >
> > > > > > On Tue, Apr 15, 2008 at 11:03 AM, Ali Saidi <[EMAIL PROTECTED]>
> > > > > > wrote:
> > > > > > > You can modify the exit() syscall to not exits until the
> > > > > > number of CPUs in
> > > > > > > the system all have called exit(). That would solve the
> > > > > > problem, however
> > > > > > > it's not completely clear that's what you want to do. If
> > > > > > you're running a
> > > > > > > multiprogrammed workload you probably want to capture time
> > > > > > when all the
> > > > > > > programs are running. The only reason I could see doing
> > > > > > otherwise was if you
> > > > > > > were running all the benchmarks from beginning to end.
> > > > > > >
> > > > > > > Ali
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > On Apr 15, 2008, at 5:57 AM, jerry lrui wrote:
> > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Thanks for all your help.
> > > > > > > >
> > > > > > > > Can you give me more details about how to control the system
> > > > > > so that all
> > > > > > > threads were done before system halt?
> > > > > > > >
> > > > > > > > Regards,
> > > > > > > > Jerry
> > > > > > > >
> > > > > > > > _______________________________________________
> > > > > > > > m5-users mailing list
> > > > > > > > [email protected]
> > > > > > > > http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > _______________________________________________
> > > > > > > m5-users mailing list
> > > > > > > [email protected]
> > > > > > > http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > ----------
> > > > > > Korey L Sewell
> > > > > > Graduate Student - PhD Candidate
> > > > > > Computer Science & Engineering
> > > > > > University of Michigan
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > ----------
> > > > > Korey L Sewell
> > > > > Graduate Student - PhD Candidate
> > > > > Computer Science & Engineering
> > > > > University of Michigan
> > > > > _______________________________________________
> > > > > m5-users mailing list
> > > > > [email protected]
> > > > > http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
> > > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > m5-users mailing list
> > > > [email protected]
> > > > http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
> > > >
> > >
> > >
> > >
> > > --
> > > ----------
> > > Korey L Sewell
> > > Graduate Student - PhD Candidate
> > > Computer Science & Engineering
> > > University of Michigan
> > >
> > > _______________________________________________
> > > m5-users mailing list
> > > [email protected]
> > > http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
> > >
> >
> >
> > _______________________________________________
> > m5-users mailing list
> > [email protected]
> > http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
> >
>
>
>
> --
> ----------
> Korey L Sewell
> Graduate Student - PhD Candidate
> Computer Science & Engineering
> University of Michigan
>
--
----------
Korey L Sewell
Graduate Student - PhD Candidate
Computer Science & Engineering
University of Michigan
_______________________________________________
m5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
