If you're still using the script you sent out before, there's a chunk of
code in there that overwrites the process variable that's probably causing
you trouble.
Steve
On Mon, May 5, 2008 at 10:58 AM, sahithi krishna <[EMAIL PROTECTED]>
wrote:
> Hi Steve,
>
> I really appreciate you quick response. I want to understand what you
> explained in you earlier mail clearly...so that I get it right:
>
> I think I have done the same thing you explained in my earlier script...
> I am assigning workload for each thread here. I create a thread for each
> workload.
>
> elif options.detailed:
> cpus = [DerivO3CPU(cpu_id = i,
> clock=options.frequency)
> for i in xrange(options.numcpus)]
>
> if options.cmd:
> #check for SMT workload
> commands = options.cmd.split(':')
>
> process = []
>
> for cmmd in commands:
> if cmmd == 'Cholesky':
> smt_process = Cholesky()
> elif cmmd == 'FFT':
> smt_process = FFT()
> elif cmmd == 'LUContig':
> smt_process = LU_contig()
> elif cmmd == 'LUNoncontig':
> smt_process = LU_noncontig()
> elif cmmd == 'Radix':
> smt_process = Radix()
> elif cmmd == 'Barnes':
> smt_process = Barnes()
> elif cmmd == 'FMM':
> smt_process = FMM()
> elif cmmd == 'OceanContig':
> smt_process = Ocean_contig()
> elif cmmd == 'OceanNoncontig':
> smt_process = Ocean_noncontig()
> elif cmmd == 'Raytrace':
> smt_process = Raytrace()
> elif cmmd == 'WaterNSquared':
> smt_process = Water_nsquared()
> elif cmmd == 'WaterSpatial':
> smt_process = Water_spatial()
> else:
> print >> sys.stderr, """The --cmd environment
> variable was set to something improper.
> Use Cholesky, FFT, LUContig, LUNoncontig, Radix, Barnes,
> FMM, OceanContig,
> OceanNoncontig, Raytrace, WaterNSquared, or
> WaterSpatial"""
> sys.exit(1)
> process += [smt_process, ]
>
> After this I assign the workload to the CPU's
>
> root = Root(system = system)
> root.workload = process
>
> for cpu in cpus:
> cpu.workload = root.workload
>
> Say if I want to run two bench marks(FFT,Radix) on 2 two-way SMT CPU's:
> Command line: m5.debug sahi.py -d -n2 -cFFT:Radix
>
> wont my code assign them in the following way:
>
> CPU0.thread1 = FFT
> CPU0.thread2 = Radix
> CPU1.thread1 = FFT
> CPU2.thread2 = Radix
>
> Why is it giving me an error then?
>
> Thanks,
> Sahithi
>
> On Mon, May 5, 2008 at 12:40 PM, Steve Reinhardt <[EMAIL PROTECTED]> wrote:
>
> > You just set the workload for each thread to point to the same workload
> > object. Note that in an SMT machine the CPU takes a list of workloads, one
> > for each thread context.
> >
> > So to run a two-thread copy of FFT on a two-way SMT CPU you'd do
> > something like:
> >
> > bm = FFT()
> > cpu.workload = [bm, bm]
> >
> > If you want to rn a four-thread copy of FFT on two two-way SMT CPUs:
> >
> > cpu0.workload = [bm, bm]
> > cpu1.workload = [bm, bm]
> >
> > Note that you have to make sure the workload object is created with the
> > right command-line parameters to use the proper number of threads.
> >
> >
> > Steve
> >
> >
> > On Mon, May 5, 2008 at 10:17 AM, sahithi krishna <
> > [EMAIL PROTECTED]> wrote:
> >
> > > Hi Steve,
> > > I donot know how to associate the same workload object to multiple
> > > thread contexts. Can you please tell me how to do this?
> > >
> > > Thanks,
> > > Sahithi
> > >
> > >
> > > On Mon, May 5, 2008 at 12:04 PM, Steve Reinhardt <[EMAIL PROTECTED]>
> > > wrote:
> > >
> > > > I just looked at your script briefly, but it looks like you're only
> > > > configuring the workload to use a single thread context on the SMT CPU.
> > > > For
> > > > multithreaded workloads like SPLASH, you have to associate the same
> > > > workload
> > > > object with multiple thread contexts (whether they're SMT CPU contexts
> > > > or on
> > > > separate CPUs) so that when the application creates new threads there is
> > > > somewhere to run them. The error you're getting indicates that the
> > > > application is creating a new thread but has nowhere to run it.
> > > >
> > > > Steve
> > > >
> > > >
> > > > On Mon, May 5, 2008 at 8:57 AM, sahithi krishna <
> > > > [EMAIL PROTECTED]> wrote:
> > > >
> > > > > Hi Steve,
> > > > > I modified the run.py to deal with the SMT part and when I run the
> > > > > script it aborts. Here is the error:
> > > > >
> > > > > M5 compiled Apr 26 2008 10:12:48
> > > > > M5 started Mon May 5 10:51:52 2008
> > > > > M5 executing on sunshyin.local
> > > > > command line: /Users/Sunshyin/m5/build/ALPHA_SE/m5.debug sahi.py
> > > > > -d -n2 -cFFT:Radix
> > > > > Global frequency set at 1000000000000 ticks per second
> > > > > 0: system.remote_gdb.listener: listening for remote gdb #0 on port
> > > > > 7000
> > > > > 0: system.remote_gdb.listener: listening for remote gdb #1 on port
> > > > > 7001
> > > > > 0: system.remote_gdb.listener: listening for remote gdb #2 on port
> > > > > 7002
> > > > > 0: system.remote_gdb.listener: listening for remote gdb #3 on port
> > > > > 7003
> > > > > warn: Entering event queue @ 0. Starting simulation...
> > > > > warn: Increasing stack size by one page.
> > > > > warn: Increasing stack size by one page.
> > > > > warn: ignoring syscall sigprocmask(3, 18446744073709551615, ...)
> > > > > warn: ignoring syscall sigprocmask(3, 18446744073709551615, ...)
> > > > > warn: ignoring syscall sigprocmask(3, 0, ...)
> > > > > warn: ignoring syscall sigaction(8, 4831387552, ...)
> > > > > warn: ignoring syscall sigaction(11, 4831387552, ...)
> > > > > warn: ignoring syscall sigaction(10, 4831387552, ...)
> > > > > warn: ignoring syscall sigaction(4, 4831387552, ...)
> > > > > warn: ignoring syscall sigaction(7, 4831387552, ...)
> > > > > warn: ignoring syscall sigaction(6, 4831387552, ...)
> > > > > warn: ignoring syscall sigaction(12, 4831387552, ...)
> > > > > warn: ignoring syscall sigaction(5, 4831387552, ...)
> > > > > warn: ignoring syscall sigaction(13, 4831387552, ...)
> > > > > warn: ignoring syscall sigprocmask(3, 0, ...)
> > > > > warn: ignoring syscall sigaction(8, 4831387552, ...)
> > > > > warn: ignoring syscall sigaction(11, 4831387552, ...)
> > > > > warn: ignoring syscall sigaction(10, 4831387552, ...)
> > > > > warn: ignoring syscall sigaction(4, 4831387552, ...)
> > > > > warn: ignoring syscall sigaction(7, 4831387552, ...)
> > > > > warn: ignoring syscall sigaction(6, 4831387552, ...)
> > > > > warn: ignoring syscall sigaction(12, 4831387552, ...)
> > > > > warn: ignoring syscall sigaction(5, 4831387552, ...)
> > > > > warn: ignoring syscall sigaction(13, 4831387552, ...)
> > > > > nxm_thread_create: no idle contexts available.
> > > > > Program aborted at cycle 163629500
> > > > > Abort trap
> > > > >
> > > > > Do you know why this is happening? I am attaching the config file
> > > > > with this email.
> > > > >
> > > > > Thanks,
> > > > > Sahithi
> > > > >
> > > > > On Sat, May 3, 2008 at 8:59 PM, Steve Reinhardt <[EMAIL PROTECTED]>
> > > > > wrote:
> > > > >
> > > > > > As far as I know, SPLASH benchmarks should work fine with SMT.
> > > > > > (Someone speak up if they know otherwise.) You'd have to modify the
> > > > > > configs/splash2/run.py script to deal with that though.
> > > > > >
> > > > > > I haven't done this before, so I can't provide any general
> > > > > > directions, but if you have more specific questions we can try and
> > > > > > answer
> > > > > > those.
> > > > > >
> > > > > > Steve
> > > > > >
> > > > > > On Sat, May 3, 2008 at 9:04 AM, sahithi krishna <
> > > > > > [EMAIL PROTECTED]> wrote:
> > > > > >
> > > > > > > Hi,
> > > > > > >
> > > > > > > As a part of my course project, my group is trying to study
> > > > > > > the SMT/CMP hybrid architectures and study their performance. As
> > > > > > > a part of
> > > > > > > the project we need to vary the parameters like number of cores
> > > > > > > and number
> > > > > > > of threads supported for each core and run simulations. As per my
> > > > > > > understanding, such configurations can be defined using M5, but I
> > > > > > > am
> > > > > > > confused as to how to run the simulations and what benchmarks to
> > > > > > > use. I am
> > > > > > > new to the M5 simulator and I trying to figure out the best way
> > > > > > > to work on
> > > > > > > my project.
> > > > > > > The spec cpu benchmarks have lincense issues and currently I
> > > > > > > donot have access to them. So I wanted to try the SPLASH
> > > > > > > benchmark suite.
> > > > > > > Can some one help me understand how I can run these simulations
> > > > > > > using SPLASH
> > > > > > > benchmarks (if it is possible). It looks like the current
> > > > > > > binaries for
> > > > > > > splash benchmarks on the M5 website work only in ALPHA SE mode
> > > > > > > and they
> > > > > > > donot work with SMT cores. If I try to work in ALPHA FS mode,
> > > > > > > will I be able
> > > > > > > to simulate SMT/CMP architecture workloads.
> > > > > > > If some one has already done these kind of simulations, your
> > > > > > > suggestions would be very useful. I am trying to run the
> > > > > > > simulations on
> > > > > > > MacOs Leopard, will I be able to use linux-dist to build my
> > > > > > > libraries
> > > > > > > properly.
> > > > > > >
> > > > > > > Thank you,
> > > > > > > Sahithi
> > > > > > >
> > > > > > > _______________________________________________
> > > > > > > m5-users mailing list
> > > > > > > [email protected]
> > > > > > > http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
> > > > > > >
> > > > > >
> > > > > >
> > > > > > _______________________________________________
> > > > > > m5-users mailing list
> > > > > > [email protected]
> > > > > > http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
> > > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > m5-users mailing list
> > > > > [email protected]
> > > > > http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
> > > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > m5-users mailing list
> > > > [email protected]
> > > > http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
> > > >
> > >
> > >
> > > _______________________________________________
> > > m5-users mailing list
> > > [email protected]
> > > http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
> > >
> >
> >
> > _______________________________________________
> > m5-users mailing list
> > [email protected]
> > http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
> >
>
>
> _______________________________________________
> m5-users mailing list
> [email protected]
> http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
>
_______________________________________________
m5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
