I'm using M5 2.0b5 with m5_system_2.0b3. I followed the compiling
instructions on the wiki.
This is the last thing that's seen when the console login is performed. It's
curious it says hda: is 8 sectors (0 MB).
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:00.0
PIIX4: chipset revision 0
PIIX4: 100% native mode on irq 31
ide0: BM-DMA at 0x8400-0x8407, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x8408-0x840f, BIOS settings: hdc:DMA, hdd:DMA
hda: M5 IDE Disk, ATA DISK drive
hdb: M5 IDE Disk, ATA DISK drive
ide0 at 0x8410-0x8417,0x8422 on irq 31
hda: max request size: 128KiB
hda: 8 sectors (0 MB), CHS=1/1/8, UDMA(33)
hda: cache flushes not supported
hda:
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Ali Saidi
Sent: Sunday, May 25, 2008 04:23
To: M5 users mailing list
Subject: Re: [m5-users] panic: Attempt to perform CHS access, only supports
LBA
Have you made any changes to M5, the kernel or the disk image?
Ali
On May 24, 2008, at 8:52 PM, Blake Mason wrote:
> I'm trying to get started with M5, but I've run into a roadblock
> here with this error. I assume I followed the compiling instructions
> correctly. I searched the last 1 year of this mailing list and found
> nothing on this error.
>
> [EMAIL PROTECTED]:~/m5/m5-2.0b5$ build/ALPHA_FS/m5.debug -d /tmp/
> output configs/example/fs.py
> M5 Simulator System
>
> Copyright (c) 2001-2008
> The Regents of The University of Michigan
> All Rights Reserved
>
>
> M5 compiled May 15 2008 01:02:00
> M5 started Sat May 24 17:31:17 2008
> M5 executing on ubuntu-vm
> command line: build/ALPHA_FS/m5.debug -d /tmp/output configs/example/
> fs.py
> /dist/m5/system/disks
> /dist/m5/system/disks
> Global frequency set at 1000000000000 ticks per second
> warn: kernel located at: /dist/m5/system/binaries/vmlinux
> 0: system.tsunami.io.rtc: Real-time clock set to Thu Jan 1
> 00:00:00 2009
> Listening for system connection on port 3456
> 0: system.remote_gdb.listener: listening for remote gdb #0 on port
> 7000
> **** REAL SIMULATION ****
> warn: Entering event queue @ 0. Starting simulation...
> panic: Attempt to perform CHS access, only supports LBA
> @ cycle 1684791043000
> [startCommand:build/ALPHA_FS/dev/ide_disk.cc, line 642]
> Program aborted at cycle 1684791043000
> Aborted
> _______________________________________________
> m5-users mailing list
> [email protected]
> http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
_______________________________________________
m5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
_______________________________________________
m5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
