Hi I am attaching my system.terminal output for one of the parsec benchmark. Any hints on why it is segfaulting? Adwait
M5 console: m5AlphaAccess @ 0xFFFFFD0200000000 Got Configuration 623 memsize 20000000 pages 10000 First free page after ROM 0xFFFFFC0000018000 HWRPB 0xFFFFFC0000018000 l1pt 0xFFFFFC0000040000 l2pt 0xFFFFFC0000042000 l3pt_rpb 0xFFFFFC0000044000 l3pt_kernel 0xFFFFFC0000048000 l2reserv 0xFFFFFC0000046000 kstart = 0xFFFFFC0000310000, kend = 0xFFFFFC0000855898, kentry = 0xFFFFFC0000310000, numCPUs = 0x4 CPU Clock at 2000 MHz IntrClockFrequency=1024 Booting with 4 processor(s) KSP: 0x20043FE8 PTBR 0x20 KSP: 0x20043FE8 PTBR 0x20 KSP: 0x20043FE8 PTBR 0x20 KSP: 0x20043FE8 PTBR 0x20 Console Callback at 0x0, fixup at 0x0, crb offset: 0xC90 Memory cluster 0 [0 - 392] Memory cluster 1 [392 - 65144] Initalizing mdt_bitmap addr 0xFFFFFC0000038000 mem_pages 10000 ConsoleDispatch at virt 10000DD8 phys 18DD8 val FFFFFC00000100A8 Bootstraping CPU 1 with sp=0xFFFFFC0000076000 Bootstraping CPU 2 with sp=0xFFFFFC0000078000 Bootstraping CPU 3 with sp=0xFFFFFC000007A000 unix_boot_mem ends at FFFFFC000007C000 k_argc = 0 jumping to kernel at 0xFFFFFC0000310000, (PCBB 0xFFFFFC0000018180 pfn 1067) CallbackFixup 0 18000, t7=FFFFFC000070C000 Entering slaveloop for cpu 1 my_rpb=FFFFFC0000018400 Entering slaveloop for cpu 2 my_rpb=FFFFFC0000018680 Entering slaveloop for cpu 3 my_rpb=FFFFFC0000018900 Linux version 2.6.13 ([email protected]) (gcc version 3.4.3) #1 SMP Sun Oct 8 19:52:07 EDT 2006 Booting GENERIC on Tsunami variation DP264 using machine vector DP264 from SRM Major Options: SMP LEGACY_START VERBOSE_MCHECK Command line: root=/dev/hda1 console=ttyS0 memcluster 0, usage 1, start 0, end 392 memcluster 1, usage 0, start 392, end 65536 freeing pages 1069:65536 reserving pages 1069:1070 SMP: 4 CPUs probed -- cpu_present_mask = f Built 1 zonelists Kernel command line: root=/dev/hda1 console=ttyS0 PID hash table entries: 4096 (order: 12, 131072 bytes) Using epoch = 1900 Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 6, 524288 bytes) Memory: 507392k/524288k available (3314k kernel code, 13272k reserved, 983k data, 224k init) Mount-cache hash table entries: 512 SMP starting up secondaries. Slave CPU 1 console command START SlaveCmd: restart FFFFFC0000310020 FFFFFC0000310020 vptb FFFFFFFE00000000 my_rpb FFFFFC0000018400 my_rpb_phys 18400 Slave CPU 2 console command START SlaveCmd: restart FFFFFC0000310020 FFFFFC0000310020 vptb FFFFFFFE00000000 my_rpb FFFFFC0000018680 my_rpb_phys 18680 Slave CPU 3 console command START SlaveCmd: restart FFFFFC0000310020 FFFFFC0000310020 vptb FFFFFFFE00000000 my_rpb FFFFFC0000018900 my_rpb_phys 18900 Brought up 4 CPUs SMP: Total of 4 processors activated (15995.06 BogoMIPS). NET: Registered protocol family 16 EISA bus registered pci: enabling save/restore of SRM state SCSI subsystem initialized srm_env: version 0.0.5 loaded successfully Installing knfsd (copyright (C) 1996 [email protected]). Initializing Cryptographic API rtc: Standard PC (1900) epoch (1900) detected Real Time Clock Driver v1.12 Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 8250 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered loop: loaded (max 8 devices) nbd: registered device at major 43 ns83820.c: National Semiconductor DP83820 10/100/1000 driver. PCI: Setting latency timer of device 0000:00:01.0 to 64 eth0: ns83820.c: 0x22c: 00000000, subsystem: 0000:0000 eth0: enabling optical transceiver eth0: using 64 bit addressing. eth0: ns83820 v0.22: DP83820 v1.3: 00:90:00:00:00:01 io=0x09000000 irq=30 f=h,sg tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <[email protected]> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 0000:00:00.0 PIIX4: chipset revision 0 PIIX4: 100% native mode on irq 31 PCI: Setting latency timer of device 0000:00:00.0 to 64 ide0: BM-DMA at 0x8400-0x8407, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x8408-0x840f, BIOS settings: hdc:DMA, hdd:DMA hda: M5 IDE Disk, ATA DISK drive hdb: M5 IDE Disk, ATA DISK drive ide0 at 0x8410-0x8417,0x8422 on irq 31 hda: max request size: 128KiB hda: 2866752 sectors (1467 MB), CHS=2844/16/63, UDMA(33) hda: cache flushes not supported hda: hda1 hdb: max request size: 128KiB hdb: 4177920 sectors (2139 MB), CHS=4144/16/63, UDMA(33) hdb: cache flushes not supported hdb: unknown partition table mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 IP route cache hash table entries: 16384 (order: 4, 131072 bytes) TCP established hash table entries: 65536 (order: 7, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 1048576 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered ip_conntrack version 2.1 (2048 buckets, 16384 max) - 296 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team arp_tables: (C) 2002 David S. Miller TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 Bridge firewalling registered 802.1Q VLAN Support v1.8 Ben Greear <[email protected]> All bugs added by David S. Miller <[email protected]> VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 224k freed init started: BusyBox v1.1.0 (2007.03.04-01:07+0000) multi-call binary mounting filesystems... loading script... Segmentation fault Done :D ---- Adwait
_______________________________________________ m5-users mailing list [email protected] http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
