Hallo zusammen,
ich habe probleme bei der konfiguration/setup für analog Fax an PBX
oder TA .
ich habe ein gpbx-setup mit Digium B410P (1 Ext. ISDN-Port TK, 1 INT
S0 an Elmeg PBX,
1 INT S0 an TA2 A/B-Wandler)
an dem A/B-Wandler und an der Telefonanlage hängt jeweils ein Fax-
Gerät (bzw. beide am TA) und
sind folgendermassen konfiguriert:
extensions.conf:
[to-intern-analog]
exten => 61,1,NoOp(xxx Fax via TA)
exten => 61,n,misdn_set_opt(!e:vt0:vr0:n)
exten => 61,n,Dial(misdn/4/${EXTEN})
exten => 61,n,Hangup
....
[from-intern-analog]
include => to-emergency
include => to-intern-pbx
include => to-intern-analog
include => to-internal-users
include => to-gateway
misdn.conf:
[intern-analog]
ports=4
msns=61,62
;; context where to go to when incoming Call on one of the above ports
context=from-intern-analog
hold_allowed=yes
callgroup=1
pickupgroup=1
max_incoming=2
max_outgoing=2
+ einträge in den extensions.ael, e.ael dateien für to-intern-analog
contexts über dem eintrag: to-internal-users
ich kann erfolgreich anrufe zwischen telefonen an der Anlage und/oder
zwischen den Faxgeräten herstellen
man hört das Fax-piepsen wenn man ein faxgerät anruft. der Dialplan
ist also soweit ok.
aber egal ob man beide Geräte an einem MISDN-Channel mit dem AB-
Adapter oder über die Telefonanlage
zu dem AB-Adapter ein Fax zu versenden versucht - es kommt keine
kommunikation zustande. Laut den
Logfiles werden die Connections gebridged und Echo-Cancelation ist
ausgeschaltet.
wenn man beim fax den lautsprecher anschaltet und mit einem telefon
anruft, hört man die stimme aus
dem telefon NICHT. ... das ganze setup hat aber an der elmeg
telefonanlage schon seit jahren gute dienste
getan und ist relativ sicher nicht defekt.
ich hänge ein debug (level5) log vom misdn modul an, das den versuch
einer internen Verbindung auf
demselben ISDN-Port .. also FAX2(62) -> AB-> B410P/CH4-> <BRIDGE> ->
B410P/CH4 -> AB -> FAX1(61)
beschreibt.
ich bastle jetzt schon ne weile und hab momentan erstmal keine ideen
wo es haken könnte - vielleicht
hilft einem profi hier ja der blick ins debug-log und kann mich
erleuchten ;-)
danke im vorraus
lg Ulrich Eck
{\rtf1\ansi\ansicpg1252\cocoartf949\cocoasubrtf350
{\fonttbl\f0\fswiss\fcharset0 Helvetica;}
{\colortbl;\red255\green255\blue255;}
\paperw11900\paperh16840\margl1440\margr1440\vieww15160\viewh13120\viewkind0
\pard\tx566\tx1133\tx1700\tx2267\tx2834\tx3401\tx3968\tx4535\tx5102\tx5669\tx6236\tx6803\ql\qnatural\pardirnatural
\f0\fs24 \cf0 P[ 4] --> lib: prim 30582 dinfo 7c0041\
P[ 4] --> new_process: New L3Id: 7c0041\
P[ 4] set_channel: bc->channel:0 channel:-1\
P[ 4] NO USERUESRINFO\
P[ 4] find_free_chan: req_chan:0\
P[ 4] --> found chan: 1\
P[ 4] set_chan_in_stack: 1\
P[ 4] I IND :SETUP oad: dad: pid:20 state:none\
P[ 4] --> channel:1 mode:NT cause:16 ocause:16 rad: cad:\
P[ 4] --> info_dad: onumplan: dnumplan: rnumplan: cpnnumplan:0\
P[ 4] --> caps:Audio 3.1k pi:3 keypad: sending_complete:0\
P[ 4] --> screen:0 --> pres:0\
P[ 4] --> addr:0 l3id:7c0041 b_stid:0 layer_id:50010480\
P[ 4] --> facility:Fac_None out_facility:Fac_None\
P[ 4] --> urate:0 rate:16 mode:0 user1:0\
P[ 4] --> bc:81c5e24 h:0 sh:0\
P[ 4] --> bc_state:BCHAN_CLEANED\
P[ 4] --> Bearer: Audio 3.1k\
P[ 4] --> Codec: Alaw\
P[ 4] --> Bearer: Audio 3.1k\
P[ 4] --> Codec: Alaw\
P[ 0] --> * NEW CHANNEL dad: oad:\
P[ 4] read_config: Getting Config\
P[ 4] config_jb: Called\
P[ 4] --> * CallGrp:1 PickupGrp:1\
P[ 4] --> CTON: Unknown\
P[ 4] --> EXPORT_PID: pid:20\
P[ 4] --> PRES: Restricted (0)\
P[ 4] --> SCREEN: Unscreened (0)\
P[ 4] * Queuing chan 0x823ef98\
P[ 4] CONTEXT:from-intern-analog\
P[ 4] I SEND:SETUP_ACKNOWLEDGE oad: dad: pid:20\
P[ 4] --> bc_state:BCHAN_CLEANED\
P[ 4] --> channel:1 mode:NT cause:16 ocause:16 rad: cad:\
P[ 4] --> info_dad: onumplan: dnumplan: rnumplan: cpnnumplan:0\
P[ 4] --> caps:Audio 3.1k pi:3 keypad: sending_complete:0\
P[ 4] --> screen:0 --> pres:0\
P[ 4] --> addr:0 l3id:7c0041 b_stid:0 layer_id:50010480\
P[ 4] --> facility:Fac_None out_facility:Fac_None\
P[ 4] --> urate:0 rate:16 mode:0 user1:0\
P[ 4] --> bc:81c5e24 h:0 sh:0\
P[ 4] $$$ Setting up bc with stid :10010400\
P[ 4] setup_bc: with dsp\
P[ 4] --> Channel is 1\
P[ 4] --> TRANSPARENT Mode\
P[ 4] $$$ Bchan Activated addr 50010402\
P[ 4] BC_STATE_CHANGE: l3id:7c0041 from:BCHAN_CLEANED to:BCHAN_ACTIVATED\
P[ 4] --> Dial\
P[ 4] misdn_write: zero write\
P[ 4] misdn_write: state (WAITING4DIGS) prodded.\
P[ 4] Starting Playtones\
P[ 4] BCHAN: bchan ACT Confirm pid:20\
P[ 4] --> lib: prim 37b82 dinfo 7c0041\
P[ 4] I IND :INFORMATION oad: dad: pid:20 state:WAITING4DIGS\
P[ 4] --> channel:1 mode:NT cause:16 ocause:16 rad: cad:\
P[ 4] --> info_dad:6 onumplan: dnumplan: rnumplan: cpnnumplan:0\
P[ 4] --> caps:Audio 3.1k pi:3 keypad: sending_complete:0\
P[ 4] --> screen:0 --> pres:0\
P[ 4] --> addr:50010402 l3id:7c0041 b_stid:10010400 layer_id:50010480\
P[ 4] --> facility:Fac_None out_facility:Fac_None\
P[ 4] --> urate:0 rate:16 mode:0 user1:0\
P[ 4] --> bc:81c5e24 h:0 sh:0\
P[ 4] --> bc_state:BCHAN_ACTIVATED\
P[ 4] --> None\
P[ 0] Waking up misdn_tasks thread\
P[ 4] overlap dial task, chan_state: 1\
P[ 4] --> lib: prim 37b82 dinfo 7c0041\
P[ 4] I IND :INFORMATION oad: dad:6 pid:20 state:WAITING4DIGS\
P[ 4] --> channel:1 mode:NT cause:16 ocause:16 rad: cad:\
P[ 4] --> info_dad:1 onumplan: dnumplan: rnumplan: cpnnumplan:0\
P[ 4] --> caps:Audio 3.1k pi:3 keypad: sending_complete:0\
P[ 4] --> screen:0 --> pres:0\
P[ 4] --> addr:50010402 l3id:7c0041 b_stid:10010400 layer_id:50010480\
P[ 4] --> facility:Fac_None out_facility:Fac_None\
P[ 4] --> urate:0 rate:16 mode:0 user1:0\
P[ 4] --> bc:81c5e24 h:0 sh:0\
P[ 4] --> bc_state:BCHAN_ACTIVATED\
P[ 4] --> None\
P[ 4] overlap dial task, chan_state: 1\
P[ 4] overlap dial task, chan_state: 1\
P[ 4] --> None\
-- Executing [EMAIL PROTECTED]:1] NoOp("mISDN/5-u29", "xxx Fax via TA") in new stack\
-- Executing [EMAIL PROTECTED]:2] misdn_set_opt("mISDN/5-u29", "!e:vt0:vr0:n") in new stack\
P[ 4] SETOPT: EchoCancel\
P[ 4] --> disabled\
P[ 4] SETOPT: Volume:0\
P[ 4] SETOPT: Volume:0\
P[ 4] SETOPT: No DSP\
-- Executing [EMAIL PROTECTED]:3] Dial("mISDN/5-u29", "misdn/4/61") in new stack\
P[ 0] --> * NEW CHANNEL dad:61 oad:(null)\
P[ 4] * Queuing chan 0x8244490\
P[ 4] read_config: Getting Config\
P[ 4] config_jb: Called\
P[ 4] --> * CallGrp:1 PickupGrp:1\
P[ 4] --> TON: Unknown\
P[ 4] --> LTON: Unknown\
P[ 4] --> CTON: Unknown\
P[ 4] * CALL: 4/61\
P[ 4] --> * dad:61 tech:mISDN/4-u30 ctx:from-intern-analog\
P[ 4] --> * adding2newbc ext 61\
P[ 4] --> * adding2newbc callerid \
P[ 4] --> pres: -1 screen: -1\
P[ 4] --> pres: 0\
P[ 4] --> PRES: Allowed (0x0)\
P[ 4] --> SCREEN: Unscreened (0x0)\
P[ 4] --> IMPORT_PID: importing pid:20\
P[ 4] NO OPTS GIVEN\
P[ 4] Disabling EC on both Sides\
P[ 4] I SEND:SETUP oad: dad:61 pid:21\
P[ 4] --> bc_state:BCHAN_CLEANED\
P[ 4] --> channel:0 mode:NT cause:16 ocause:16 rad: cad:\
P[ 4] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0\
P[ 4] --> caps:Audio 3.1k pi:0 keypad: sending_complete:0\
P[ 4] --> screen:0 --> pres:0\
P[ 4] --> addr:0 l3id:80050041 b_stid:0 layer_id:50020480\
P[ 4] --> facility:Fac_None out_facility:Fac_None\
P[ 4] --> urate:0 rate:16 mode:0 user1:0\
P[ 4] --> bc:81c639c h:0 sh:0\
P[ 4] find_free_chan: req_chan:0\
P[ 4] --> found chan: 2\
P[ 4] set_chan_in_stack: 2\
P[ 4] --> found channel: 2\
P[ 4] --> new_l3id ff00\
P[ 4] --> lib: prim 30581 dinfo ff00\
P[ 4] --> lib: Event_ind:SETUP CONFIRM [NT] : new L3ID is 8006ff00\
P[ 4] I IND :CC_SETUP|CONFIRM: old l3id:ff00 new l3id:8006ff00\
P[ 4] I IND :NEW_L3ID oad: dad:61 pid:21 state:NOTHING\
P[ 4] --> channel:2 mode:NT cause:16 ocause:16 rad: cad:\
P[ 4] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0\
P[ 4] --> caps:Audio 3.1k pi:0 keypad: sending_complete:0\
P[ 4] --> screen:0 --> pres:0\
P[ 4] --> addr:0 l3id:8006ff00 b_stid:0 layer_id:50020480\
P[ 4] --> facility:Fac_None out_facility:Fac_None\
P[ 4] --> urate:0 rate:16 mode:0 user1:0\
P[ 4] --> bc:81c639c h:0 sh:0\
P[ 4] --> bc_state:BCHAN_CLEANED\
P[ 4] --> * SEND: State Dialing pid:21\
-- Called 4/61\
P[ 4] --> lib: prim 30182 dinfo 8006ff00\
P[ 4] I IND :ALERTING oad: dad:61 pid:21 state:CALLING\
P[ 4] --> channel:2 mode:NT cause:16 ocause:16 rad: cad:\
P[ 4] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0\
P[ 4] --> caps:Audio 3.1k pi:0 keypad: sending_complete:0\
P[ 4] --> screen:0 --> pres:0\
P[ 4] --> addr:0 l3id:8006ff00 b_stid:0 layer_id:50020480\
P[ 4] --> facility:Fac_None out_facility:Fac_None\
P[ 4] --> urate:0 rate:16 mode:0 user1:0\
P[ 4] --> bc:81c639c h:0 sh:0\
P[ 4] --> bc_state:BCHAN_CLEANED\
P[ 4] --> updating channel name to [mISDN/6-u31]\
P[ 4] --> We have no inband Data, the other end must create ringing\
-- mISDN/6-u31 is ringing\
P[ 4] * IND : Indication [3] from 61\
P[ 4] * IND : ringing pid:20\
P[ 4] --> * IND : ringing pid:20\
P[ 4] I SEND:ALERTING oad: dad:61 pid:20\
P[ 4] --> bc_state:BCHAN_ACTIVATED\
P[ 4] --> channel:1 mode:NT cause:16 ocause:16 rad: cad:\
P[ 4] --> info_dad:1 onumplan: dnumplan: rnumplan: cpnnumplan:0\
P[ 4] --> caps:Audio 3.1k pi:3 keypad: sending_complete:0\
P[ 4] --> screen:0 --> pres:0\
P[ 4] --> addr:50010402 l3id:7c0041 b_stid:10010400 layer_id:50010480\
P[ 4] --> facility:Fac_None out_facility:Fac_None\
P[ 4] --> urate:0 rate:16 mode:0 user1:0\
P[ 4] --> bc:81c5e24 h:0 sh:0\
P[ 4] $$$ bc already upsetted stid :10010400 (state:BCHAN_ACTIVATED)\
P[ 4] --> * SEND: State Ring pid:20\
P[ 4] misdn_write: zero write\
P[ 4] misdn_write: state (ALERTING) prodded.\
P[ 4] --> lib: prim 30782 dinfo 8006ff00\
P[ 4] I IND :CONNECT oad: dad:61 pid:21 state:ALERTING\
P[ 4] --> channel:2 mode:NT cause:16 ocause:16 rad: cad:\
P[ 4] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan: \
P[ 4] --> caps:Audio 3.1k pi:0 keypad: sending_complete:0\
P[ 4] --> screen:0 --> pres:0\
P[ 4] --> addr:0 l3id:8006ff00 b_stid:0 layer_id:50020480\
P[ 4] --> facility:Fac_None out_facility:Fac_None\
P[ 4] --> urate:0 rate:16 mode:0 user1:0\
P[ 4] --> bc:81c639c h:0 sh:0\
P[ 4] --> bc_state:BCHAN_CLEANED\
P[ 4] I SEND:CONNECT_ACKNOWLEDGE oad: dad:61 pid:21\
P[ 4] --> bc_state:BCHAN_CLEANED\
P[ 4] --> channel:2 mode:NT cause:16 ocause:16 rad: cad:\
P[ 4] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan: \
P[ 4] --> caps:Audio 3.1k pi:0 keypad: sending_complete:0\
P[ 4] --> screen:0 --> pres:0\
P[ 4] --> addr:0 l3id:8006ff00 b_stid:0 layer_id:50020480\
P[ 4] --> facility:Fac_None out_facility:Fac_None\
P[ 4] --> urate:0 rate:16 mode:0 user1:0\
P[ 4] --> bc:81c639c h:0 sh:0\
P[ 4] $$$ Setting up bc with stid :10020400\
P[ 4] setup_bc: with dsp\
P[ 4] --> Channel is 2\
P[ 4] --> TRANSPARENT Mode\
P[ 4] $$$ Bchan Activated addr 50020402\
P[ 4] BC_STATE_CHANGE: l3id:8006ff00 from:BCHAN_CLEANED to:BCHAN_ACTIVATED\
P[ 4] ph_control: c1:2100 c2:0\
P[ 4] ec_enable\
P[ 4] --> None\
-- mISDN/6-u31 answered mISDN/5-u29\
P[ 4] * IND : Indication [-1] from 61\
P[ 4] --> * IND : -1! (stop indication) pid:20\
P[ 4] --> None\
P[ 4] * ANSWER:\
P[ 4] --> Connection is without BF encryption\
P[ 4] --> None\
P[ 4] --> empty cad using dad\
P[ 4] I SEND:CONNECT oad: dad:61 pid:20\
P[ 4] --> bc_state:BCHAN_ACTIVATED\
P[ 4] --> channel:1 mode:NT cause:16 ocause:16 rad: cad:61\
P[ 4] --> info_dad:1 onumplan: dnumplan: rnumplan: cpnnumplan:0\
P[ 4] --> caps:Audio 3.1k pi:3 keypad: sending_complete:0\
P[ 4] --> screen:0 --> pres:0\
P[ 4] --> addr:50010402 l3id:7c0041 b_stid:10010400 layer_id:50010480\
P[ 4] --> facility:Fac_None out_facility:Fac_None\
P[ 4] --> urate:0 rate:16 mode:0 user1:0\
P[ 4] --> bc:81c5e24 h:0 sh:0\
P[ 4] $$$ bc already upsetted stid :10010400 (state:BCHAN_ACTIVATED)\
P[ 4] ec_enable\
P[ 4] * IND : Indication [20] from 61\
P[ 4] --> * Unknown Indication:20 pid:20\
P[ 4] * IND : Indication [20] from \
P[ 4] P[ 4] BCHAN: bchan ACT Confirm pid:21\
--> * Unknown Indication:20 pid:21\
P[ 4] I SEND: Making conference with Number:21\
P[ 4] I Send: BRIDGE from:4 to:4\
P[ 4] --> bc_addr:50010402\
P[ 4] BC_STATE_CHANGE: l3id:7c0041 from:BCHAN_ACTIVATED to:BCHAN_BRIDGED\
P[ 4] ph_control: c1:2304 c2:0\
P[ 4] ph_control: c1:2300 c2:15\
P[ 4] Joining bc:50010402 in conf:21\
P[ 4] --> bc_addr:50020402\
P[ 4] BC_STATE_CHANGE: l3id:8006ff00 from:BCHAN_ACTIVATED to:BCHAN_BRIDGED\
P[ 4] ph_control: c1:2304 c2:0\
P[ 4] ph_control: c1:2300 c2:15\
P[ 4] Joining bc:50020402 in conf:21\
-- Native bridging mISDN/5-u29 and mISDN/6-u31\
P[ 4] * Making Native Bridge between and \
P[ 4] --> lib: prim 3f082 dinfo 8006ff00\
P[ 4] --> Removing Process Id:0 on this port.\
P[ 4] lib: Event_ind:CC_NEW_CR : very new L3ID is 80060041\
P[ 4] I IND :NEW_L3ID oad: dad:61 pid:21 state:CONNECTED\
P[ 4] --> channel:2 mode:NT cause:16 ocause:16 rad: cad:\
P[ 4] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan: \
P[ 4] --> caps:Audio 3.1k pi:0 keypad: sending_complete:0\
P[ 4] --> screen:0 --> pres:0\
P[ 4] --> addr:50020402 l3id:80060041 b_stid:10020400 layer_id:50020480\
P[ 4] --> facility:Fac_None out_facility:Fac_None\
P[ 4] --> urate:0 rate:16 mode:0 user1:0\
P[ 4] --> bc:81c639c h:0 sh:0\
P[ 4] --> bc_state:BCHAN_BRIDGED\
-- Remote UNIX connection\
-- Remote UNIX connection disconnected\
-- Remote UNIX connection\
\
\
\
\
\
\
\
-- Remote UNIX connection disconnected\
-- Remote UNIX connection\
-- Remote UNIX connection disconnected\
P[ 4] --> lib: prim 34582 dinfo 80060041\
P[ 4] I IND :DISCONNECT oad: dad:61 pid:21 state:CONNECTED\
P[ 4] --> channel:2 mode:NT cause:16 ocause:16 rad: cad:\
P[ 4] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan: \
P[ 4] --> caps:Audio 3.1k pi:0 keypad: sending_complete:0\
P[ 4] --> screen:0 --> pres:0\
P[ 4] --> addr:50020402 l3id:80060041 b_stid:10020400 layer_id:50020480\
P[ 4] --> facility:Fac_None out_facility:Fac_None\
P[ 4] --> urate:0 rate:16 mode:0 user1:0\
P[ 4] --> bc:81c639c h:0 sh:0\
P[ 4] --> bc_state:BCHAN_BRIDGED\
P[ 4] $$$ find_holded: --> holded:0 channel:0\
P[ 4] $$$ find_holded: --> holded:0 channel:0\
P[ 4] --> org:1 nt:1, inbandavail:0 state:11\
P[ 4] hangup_chan called\
P[ 4] --> queue_hangup\
P[ 4] I SEND:RELEASE oad: dad:61 pid:21\
P[ 4] --> bc_state:BCHAN_BRIDGED\
P[ 4] --> channel:2 mode:NT cause:16 ocause:-1 rad: cad:\
P[ 4] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan: \
P[ 4] --> caps:Audio 3.1k pi:0 keypad: sending_complete:0\
P[ 4] --> screen:0 --> pres:0\
P[ 4] --> addr:50020402 l3id:80060041 b_stid:10020400 layer_id:50020480\
P[ 4] --> facility:Fac_None out_facility:Fac_None\
P[ 4] --> urate:0 rate:16 mode:0 user1:0\
P[ 4] --> bc:81c639c h:0 sh:0\
P[ 4] Read Null Frame\
P[ 4] I SEND: Splitting conference with Number:21\
P[ 4] BC_STATE_CHANGE: l3id:7c0041 from:BCHAN_BRIDGED to:BCHAN_ACTIVATED\
P[ 4] ph_control: c1:2305 c2:0\
P[ 4] ph_control: c1:2301 c2:15\
P[ 4] Splitting bc:50010402 in conf:21\
P[ 4] BC_STATE_CHANGE: l3id:80060041 from:BCHAN_BRIDGED to:BCHAN_ACTIVATED\
P[ 4] ph_control: c1:2305 c2:0\
P[ 4] ph_control: c1:2301 c2:15\
P[ 4] Splitting bc:50020402 in conf:21\
P[ 4] * IND : HANGUP pid:21 ctx:from-intern-analog dad: oad:61 State:CONNECTED\
P[ 4] --> l3id:80060041\
P[ 4] --> cause:16\
P[ 4] --> out_cause:16\
P[ 4] --> state:CONNECTED\
P[ 4] ph_control: c1:2310 c2:12\
P[ 4] --> Channel: mISDN/6-u31 hanguped new state:CLEANING\
== Spawn extension (from-intern-analog, 61, 3) exited non-zero on 'mISDN/5-u29'\
P[ 4] * IND : HANGUP pid:20 ctx:from-intern-analog dad:61 oad: State:CONNECTED\
P[ 4] --> l3id:7c0041\
P[ 4] --> cause:16\
P[ 4] --> out_cause:16\
P[ 4] --> state:CONNECTED\
P[ 4] ph_control: c1:2310 c2:12\
P[ 4] I SEND:DISCONNECT oad: dad:61 pid:20\
P[ 4] --> bc_state:BCHAN_ACTIVATED\
P[ 4] --> channel:1 mode:NT cause:16 ocause:16 rad: cad:61\
P[ 4] --> info_dad:1 onumplan: dnumplan: rnumplan: cpnnumplan:0\
P[ 4] --> caps:Audio 3.1k pi:8 keypad: sending_complete:0\
P[ 4] --> screen:0 --> pres:0\
P[ 4] --> addr:50010402 l3id:7c0041 b_stid:10010400 layer_id:50010480\
P[ 4] --> facility:Fac_None out_facility:Fac_None\
P[ 4] --> urate:0 rate:16 mode:0 user1:0\
P[ 4] --> bc:81c5e24 h:0 sh:0\
P[ 4] --> Channel: mISDN/5-u29 hanguped new state:CLEANING\
P[ 4] --> lib: prim 35a82 dinfo 80060041\
P[ 4] $$$ CLEANUP CALLED pid:21\
P[ 4] $$$ Cleaning up bc with stid :10020400 pid:21\
P[ 4] --> ec_disable\
P[ 4] Sending Control ECHOCAN_OFF\
P[ 4] ph_control: c1:2319 c2:0\
P[ 4] $$$ Bchan deActivated addr 50020402\
P[ 4] BC_STATE_CHANGE: l3id:80060041 from:BCHAN_ACTIVATED to:BCHAN_RELEASE\
P[ 4] BC_STATE_CHANGE: l3id:80060041 from:BCHAN_RELEASE to:BCHAN_CLEANED\
P[ 4] empty_chan_in_stack: 2\
P[ 4] I IND :RELEASE_COMPLETE oad: dad: pid:21 state:CLEANING\
P[ 4] --> channel:0 mode:NT cause:16 ocause:16 rad: cad:\
P[ 4] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0\
P[ 4] --> caps:Speech pi:0 keypad: sending_complete:0\
P[ 4] --> screen:0 --> pres:0\
P[ 4] --> addr:50020402 l3id:80060041 b_stid:0 layer_id:50020480\
P[ 4] --> facility:Fac_None out_facility:Fac_None\
P[ 4] --> urate:0 rate:16 mode:0 user1:0\
P[ 4] --> bc:81c639c h:0 sh:0\
P[ 4] --> bc_state:BCHAN_CLEANED\
P[ 4] ast_hangup already called, so we have no ast ptr anymore in event(RELEASE_COMPLETE)\
P[ 4] hangup_chan called\
P[ 4] --> No need to queue hangup\
P[ 4] Cannot hangup chan, no ast\
P[ 4] release_chan: bc with l3id: 80060041\
P[ 4] --> lib: prim 3f182 dinfo 80060041\
P[ 4] --> CC_RELEASE_CR: Faking Realease_cr for 41000401 l3id:80060041\
P[ 4] --> lib: RELEASE_CR Ind with l3id:80060041\
P[ 4] --> lib: CLEANING UP l3id: 80060041\
P[ 4] I IND :CLEAN_UP oad: dad: pid:21 state:none\
P[ 4] $$$ CLEANUP CALLED pid:21\
P[ 4] $$$ Already cleaned up bc with stid :0\
P[ 4] BCHAN: MGR_DELLAYER|CNF pid:21\
P[ 4] --> lib: prim 34d82 dinfo 7c0041\
P[ 4] $$$ CLEANUP CALLED pid:20\
P[ 4] $$$ Cleaning up bc with stid :10010400 pid:20\
P[ 4] --> ec_disable\
P[ 4] Sending Control ECHOCAN_OFF\
P[ 4] ph_control: c1:2319 c2:0\
P[ 4] $$$ Bchan deActivated addr 50010402\
P[ 4] BC_STATE_CHANGE: l3id:7c0041 from:BCHAN_ACTIVATED to:BCHAN_RELEASE\
P[ 4] BC_STATE_CHANGE: l3id:7c0041 from:BCHAN_RELEASE to:BCHAN_CLEANED\
P[ 4] empty_chan_in_stack: 1\
P[ 4] I IND :RELEASE oad: dad: pid:20 state:CLEANING\
P[ 4] --> channel:0 mode:NT cause:16 ocause:16 rad: cad:\
P[ 4] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0\
P[ 4] --> caps:Speech pi:0 keypad: sending_complete:0\
P[ 4] --> screen:0 --> pres:0\
P[ 4] --> addr:50010402 l3id:7c0041 b_stid:0 layer_id:50010480\
P[ 4] --> facility:Fac_None out_facility:Fac_None\
P[ 4] --> urate:0 rate:16 mode:0 user1:0\
P[ 4] --> bc:81c5e24 h:0 sh:0\
P[ 4] --> bc_state:BCHAN_CLEANED\
P[ 4] ast_hangup already called, so we have no ast ptr anymore in event(RELEASE)\
P[ 4] hangup_chan called\
P[ 4] --> No need to queue hangup\
P[ 4] Cannot hangup chan, no ast\
P[ 4] release_chan: bc with l3id: 7c0041\
P[ 4] --> lib: prim 3f182 dinfo 7c0041\
P[ 4] --> CC_RELEASE_CR: Faking Realease_cr for 41000401 l3id:7c0041\
P[ 4] --> lib: RELEASE_CR Ind with l3id:7c0041\
P[ 4] --> lib: CLEANING UP l3id: 7c0041\
P[ 4] I IND :CLEAN_UP oad: dad: pid:20 state:none\
P[ 4] $$$ CLEANUP CALLED pid:20\
P[ 4] $$$ Already cleaned up bc with stid :0\
P[ 4] BCHAN: MGR_DELLAYER|CNF pid:20\
gpbx*CLI> \
}
Am 09.09.2008 um 17:21 schrieb Jaroslaw Zdrzalek:
moin,
es wird dir nicht möglich sein, mit jedem Faxgerät zu kommuinizieren.
Obwohl es vereinzelt so aussieht, als würde es klappen, ist das
der falsche Ansatz: Fax über SIP geht nicht ohne T38.
Fax über ISDN und ISDN/Analogwandler geht, wenn das Timing
der ISDN-Karten auf dem * stimmt, d.h. verwende eine einzige ISDN-
Karte
oder einen Hersteller, der das o.g. Verhalten unterstützt (z.B.
Sangoma).
Du kannst dann einen Port in den NT-Modus schalten (interner S0) und
einen handelsüblichen 2a/b-Adapter anschliessen: das funktioniert.
Möglich ist es auch, ein Mediagateway zu verwenden, das ist allesdings
nicht so einfach zu konfigurieren sein dürfte.
----- "Andreas Hilboll" <[EMAIL PROTECTED]> schrieb:
Hallo zusammen,
ich habe ein analoges Faxgerät über ein Linksys 2102 ATA an
Gemeinschaft
angeschlossen. Im Gemeinschaft-Server steckt eine Beronet 4S0
ISDN-Karte, an der zwei Mehrgeräte-Anschlüsse liegen. Es sind keine
externen SIP-Provider eingetragen.
Beim Versenden von Faxen kommt es zu dem Problem, dass die Verbindung
zwar aufgebaut wird und man das 'Fax-Gepiepe' von beiden Enden hören
kann, aber irgendwie scheinen sich Sende- und Empfangsfaxgerät nicht
zu
erkennen, und das Sende-Fax bricht dann den Sendevorgang ab.
Woran könnte das liegen?
Seltsamerweise funktioniert es nämlich, wenn ich von dem analogen
Faxgerät ein Fax an die interne Durchwahl des Hylafax (in unserem
Fall
6900) sende. An den Einstellungen des Linksys sollte es also nicht
liegen, oder?
T38 habe ich im Linksys ausgeschaltet, da ich irgendwo gelesen habe,
dass Asterisk damit keine Faxe von SIP nach ISDN routen kann.
Vielen Dank für jeglichen Hinweis!
Andreas Hilboll
