On 2008-01-08 13:33, 김상언[무선인터넷개발담당] wrote:
-----원본 메시지-----
보낸 사람: "Brian E Carpenter" <[EMAIL PROTECTED]>
보낸 날짜: 2008-01-08 오전 6:01:11
받는 사람: "김상언[무선인터넷개발담당]" <[EMAIL PROTECTED]>
참조: "General Area Review Team" <[email protected]>, "Ron Bonica"
<[EMAIL PROTECTED]>,
"[EMAIL PROTECTED]"
<[EMAIL PROTECTED]>, "Fred
Baker" <[EMAIL PROTECTED]>
제목: Re: Gen-ART review of
draft-ietf-v6ops-802-16-deployment-scenarios-06.txt
Does the AAA exchange run over IP? If so, what IP address is used? If
not,
what packetization is used for the AAA exchange?
The AAA run over IP.
I understand that between the BS and the AAA server. But what about
the initial AAA exchange between the MS and the BS? At that time,
according to the draft, the MS has no IP address.
A PKM (Privacy Key Management) message is for initial AAA exchange at
Figure 6 in the
http://tools.ietf.org/wg/16ng/draft-sekim-16ng-ip-00.txt. More detailed
procedures are on the section 6.3.2.3.9 in IEEE 802.16e-2005
OK - I think the draft should state that the MS-BS AAA exchange occurs
in 802.16 messages and not over IP.
I will appreciate to reply to [EMAIL PROTECTED]
This address ([EMAIL PROTECTED]) has some constraints to discuss.
No problem, but your KT address is used in the draft.
Thanks
Brian
Regards,
Sang-Eon Kim at KT in Seoul
Regards
Brian Carpenter
University of Auckland
On 2008-01-07 20:00, 김상언[무선인터넷개발담당] wrote:
Hi everyone,
2.5. IPv6 Security
When initiating the connection, an MS is authenticated by the AAA
This is the first time that a connection mechanism is mentioned
in the draft. It seems to need more description or a reference.
An example of connection mechanism can be refer to
http://tools.ietf.org/wg/16ng/draft-sekim-16ng-ip-00.txt
If you (other author and reviewers) agree, I accept to merge above
draft to draft-ietf-v6ops-802-16-deployment-scenarios-06.txt.
server located at its service provider network. All the parameters
related to authentication (username, password and etc.) are forwarded
by the BS to the AAA server. The AAA server authenticates the MSs
and when an MS is once authenticated and associated successfully with
BS, IPv6 an address will be acquired by the MS through stateless
autoconfiguration or DHCPv6. Note the initiation and authentication
process is the same as used in IPv4.
Does the AAA exchange run over IP? If so, what IP address is used? If
not,
what packetization is used for the AAA exchange?
The AAA run over IP.
ASN gateway (or ACR that stands for Access Control Router) and AAA
servers are network infrastructure.
ASN gateway is an WiMAX Forum's term.
Before an MS initiates to access, ACR and AAA maintain AAA connection
by IP network.
ACR serves for AAA client function and AAA servers provide AAA server
function. It depends on AAA protocols such as RADIUS, TACACS and
Diameter.
The WiMAX Forum prefer RADIUS protocol.
However the commercial service is used Diameter protocol in Korea due
to its advanced capabilities.
Sang-Eon Kim / KT
------------------------------------------------------------------------
Subject:
Gen-ART review of draft-ietf-v6ops-802-16-deployment-scenarios-06.txt
From:
"Brian E Carpenter" <[EMAIL PROTECTED]>
Date:
Mon, 07 Jan 2008 15:31:25 +1300
To:
"General Area Review Team" <[email protected]>
To:
"General Area Review Team" <[email protected]>
CC:
"Ron Bonica" <[EMAIL PROTECTED]>,
<[EMAIL PROTECTED]>, "Fred
Baker" <[EMAIL PROTECTED]>
_______________________________________________
Gen-art mailing list
[email protected]
https://www1.ietf.org/mailman/listinfo/gen-art
