Hi Daniele,
Thanks for addressing everything. There's only one issue left in section
4.1.1 on Priority, below. I've trimmed out all the rest.
On 7 Feb 2017, at 3:36, Daniele Ceccarelli wrote:
I get that part ("At least one priority level MUST be advertised").
It's the end I don't understand: "that, unless overridden by local
policy, SHALL be at priority level 0." What does that mean?
[DC] It means that if only one priority is supported it has to be
priority 0.
So, let me see if I have this right: It's OK to have 01100000 but not
01000000 or 00100000? If so, why is that?
For any particular administrative purpose it could be possible to set
it to a different value, but that shouldn’t be done.
Well, it doesn't say that shouldn't be done, but it probably doesn't
need to say anything about local configurations.
pr
--
Pete Resnick <http://www.qualcomm.com/~presnick/>
Qualcomm Technologies, Inc. - +1 (858)651-4478
_______________________________________________
Gen-art mailing list
Gen-art@ietf.org
https://www.ietf.org/mailman/listinfo/gen-art
